GrabCAD
Ender 3v2 Orbiter extruder mount for V6 hot ends.
by GrabCAD
Last crawled date: 1 year, 11 months ago
The "MBEDZ" Orbiter mount for the Creality Ender3v2.
The idea was to make a mount that's easy to print, unobtrusive and pretty strong for its size.
This mount should work with most of the "Fixed Block V6 Brackets" found on AliExpress.
I don't know if it will work with the stock hot end without some spacers behind it, I'm using it with a Red Lizard hot end and Holdes 3D V6 fan upgrade kit.
I printed mine from PETG and it came out well, I let Cura generate the support at 15% and it was quite easy to remove it with some side cutters.
Materials and settings are up to you but I went for 0.2mm layers, 3 walls and 40% infill, printed with a brim.
Assembly is quite simple:
Remove hot end assembly.
Remove the top nuts and bolts, rollers and spacers from the X-Axis hot end carriage.
Insert the metal spacers into the large holes on the back of the Orbiter mount just a little (but make sure they will fit all the way through the hole before going any further).
Fit the Orbiter mount over the top of the metal plate and reassemble the roller assembly.
Don't forget to check the eccentric nut on the lower roller, make sure there is no play between the rollers before printing.
If you have a Bed leveling probe fitted, back off the screw at the top of the bracket to allow the Orbiter mount to be pushed into place.
Once installed, route your cabling through the guide using the post on the under side as a spot to zip-tie your cables.
Insert your PTFE tube into the hot end and then cut it 11.5mm above the top surface of the mount. A few turns with a 4mm drill bit will help funnel the filament through into the tube.
I hope this part helps a few people out there, the Orbiter extruder is a great upgrade for the Ender 3v2.
The idea was to make a mount that's easy to print, unobtrusive and pretty strong for its size.
This mount should work with most of the "Fixed Block V6 Brackets" found on AliExpress.
I don't know if it will work with the stock hot end without some spacers behind it, I'm using it with a Red Lizard hot end and Holdes 3D V6 fan upgrade kit.
I printed mine from PETG and it came out well, I let Cura generate the support at 15% and it was quite easy to remove it with some side cutters.
Materials and settings are up to you but I went for 0.2mm layers, 3 walls and 40% infill, printed with a brim.
Assembly is quite simple:
Remove hot end assembly.
Remove the top nuts and bolts, rollers and spacers from the X-Axis hot end carriage.
Insert the metal spacers into the large holes on the back of the Orbiter mount just a little (but make sure they will fit all the way through the hole before going any further).
Fit the Orbiter mount over the top of the metal plate and reassemble the roller assembly.
Don't forget to check the eccentric nut on the lower roller, make sure there is no play between the rollers before printing.
If you have a Bed leveling probe fitted, back off the screw at the top of the bracket to allow the Orbiter mount to be pushed into place.
Once installed, route your cabling through the guide using the post on the under side as a spot to zip-tie your cables.
Insert your PTFE tube into the hot end and then cut it 11.5mm above the top surface of the mount. A few turns with a 4mm drill bit will help funnel the filament through into the tube.
I hope this part helps a few people out there, the Orbiter extruder is a great upgrade for the Ender 3v2.
Similar models
grabcad
free
Anet A8 Twin Extruder Assembly with E3D V6 Hot End
...anet a8 twin extruder assembly with e3d v6 hot end
grabcad
anet a8 twin extruder assembly with e3d v6 hot end
grabcad
free
Ender 3 Max mount for Orbiter v1.5 Extruder
... rotated 90 degrees with the motor over the plate behind the hot end but the motor interfered with the full travel of the x axis.
grabcad
free
Robo R1plus Accessories
...end and needed a new clamp hot end clamp and part fan holder. i also made a mount for a raspberry pi camera clamp for the cables.
grabcad
free
Ender 3 Pro Direct Drive Extruder
... here:
https://www.thingiverse.com/thing:4141103
original fan cover can be found here:
https://www.thingiverse.com/thing:1720087
grabcad
free
Ender 3 pro - E3D V6 mount + fanduct 5015 fan
...ly is needed m3 screws and m3 heat inserts.
update 1: bl touch/ 3d touch holder is now higher. also i added ring for tie cables.
grabcad
free
Ender 5 Plus Hot End Mounting Bracket
...ender 5 plus hot end mounting bracket
grabcad
this part holds the hot end for the creality ender 5 plus.
grabcad
free
E3D v6 Hot End
...e3d v6 hot end
grabcad
e3d v6 hot end modified to fit in factory solidoodle 4 (sd4) hot end mount.
grabcad
free
ENDER 3 WITH ORBITER(DIRECT DRIVE) - ONLY ONE PRINTED PART
...;
2 m3 x 30 socket head cap(1);
3 m3 square thin nut: 5.4mm x 5.4mm x 1.8mm(2);
4 the orbiter v1.5 extruder;
5 teflon tube(70mm);
grabcad
free
X-Axis Carrier, Upgrade for Felix 3
...n detail melted up sometimes, suddenly) so i decided to upgrade it.
i was modified e3d v6 hot-end to fit my felix and here it is.
grabcad
free
Ender 3 Direct Drive Dual Gear Extruder Mount
...truder on the bracket included in the creality direct drive upgrade kit.
i printed mine in pla and it seems to work fine so far.
3V2
grabcad
free
Creality Ender 3V2 Voron Afterburner With BL touch
...3v2 voron afterburner with bl touch
grabcad
adapter plate for drop in upgrade to voron afterburner. bltouch mount also baked in.
grabcad
free
Ender 3v2 Pen Holder for Pen Plotter
...ithub.com/ahmadaziz6720
linkedin: https://linkedin.com/in/ahmad-aziz-598543166/
instagram: https://instagram.com/ahmadaziz_hacked
grabcad
free
Tiki3
...a mount and fan duct system for creality ender 3/3pro/3v2 and ender...
grabcad
free
Ender 3 v2 left side screen mount
...the right to the left side of the ender 3v2 i printed with pla 20% infill. used shapr3d software...
grabcad
free
MBOT3D DDeX Mk4 extruder based on Voron Design
...extruder by voron clockwork. this design support for ender 3v2 voron design links:...
grabcad
free
Creality Ender 3-V2
...3-v2. this is the original modeling for the ender 3v2 that is used by others and published on different...
grabcad
free
Star shaped box with Super mushroom
...adjustement to close easily the box for my ender 3v2 is 0.4...
grabcad
free
Spool support Ender 3.
...3. i repositioned the spool bracket on my ender 3v2 for a smoother flow of the filament. therefore i...
grabcad
free
Extention Ender 3 & Pro Like Ender 3 V2 Pulley Drive Stepper
...grabcad desain ini terinspirasi dari mesin pencetak 3d ender 3v2 yang memiliki pulley diatas stepper ektruder guna untuk memutar...
Orbiter
grabcad
free
Orbiter
...orbiter
grabcad
sunlight gathering orbiter! designed to pivot and spin in orbit!
grabcad
free
Orbital Shaker
...orbital shaker
grabcad
orbital shaker or agitador orbital esquematico
grabcad
free
Orbital robot
...orbital robot
grabcad
orbital robot
grabcad
free
Orbit Gum
...orbit gum
grabcad
orbit gum
grabcad
free
Orbital Floor
...orbital floor
grabcad
orbital floor
grabcad
free
Orbital Seat
...orbital seat
grabcad
orbital seat for cameraman
grabcad
free
Orbit
...orbit
grabcad
an idea for christmas
grabcad
free
RODAS ORBITAL
...rodas orbital
grabcad
rodas modelo orbital da volkswagen
grabcad
free
cubic orbital
...cubic orbital
grabcad
cubic orbital for 3d manufacturing/printing/prototyping
grabcad
free
Orbiter
...orbiter
grabcad
engine and chassis with spin design.
Ender
grabcad
free
ender 3
...ender 3
grabcad
ender 3
grabcad
free
ender 3
...ender 3
grabcad
ender 3 parts to convert
grabcad
free
ender mg
...ender mg
grabcad
ender mg
https://www.thingiverse.com/thing:4772373
grabcad
free
Ender extrusion
...ender extrusion
grabcad
extrusion set with upgrade parts for ender 3 / 5
grabcad
free
Ender Filament holder
...ender filament holder
grabcad
ender filament holder
grabcad
free
Ender 3 Spool
...ender 3 spool
grabcad
another component for ender 3 spool
grabcad
free
ender 3
...ender 3
grabcad
spalla sinistra
grabcad
free
Noctua Fan Case for Ender 3/Ender 3 Pro
...
a housing for a noctua 40x20mm hotend fan, designed to work with original mounting holes and blower fan on ender 3/ender 3 pro.
grabcad
free
Creality ender 3
...creality ender 3
grabcad
original design for creality ender 3
3d printer
grabcad
free
35mm_Laser_Clamp_Creality Ender S1
...35mm_laser_clamp_creality ender s1
grabcad
laser clamp for creality ender s1 3d printer.
V6
grabcad
free
V6
...v6
grabcad
v6 engine
grabcad
free
V6
...v6
grabcad
v6 with twin turbocharger
grabcad
free
v6
...v6
grabcad
newbie.. v6 engine design
grabcad
free
V6
...v6
grabcad
v6 crankshaft + piston engine
grabcad
free
V6
...v6
grabcad
amlkejfioef
grabcad
free
papon v6
...papon v6
grabcad
papon v6
grabcad
free
V6 Engine
...v6 engine
grabcad
v6 engine.
grabcad
free
PIEC v6
...piec v6
grabcad
piec v6
grabcad
free
v6 engine
...v6 engine
grabcad
v6 engine
grabcad
free
V6 Engine
...v6 engine
grabcad
a v6 engine
Hot
grabcad
free
hot plate
...hot plate
grabcad
hot plate
grabcad
free
Hot Button
...hot button
grabcad
hot button
grabcad
free
red-hot
...red-hot
grabcad
red-hot
grabcad
free
HOT ROD
...hot rod
grabcad
hot rod
grabcad
free
hot plate
...hot plate
grabcad
hot plate
grabcad
free
SMOKIN HOT
...smokin hot
grabcad
looking for smokin hot
grabcad
free
Hot water
...hot water
grabcad
unit hot water
grabcad
free
hot plate
...hot plate
grabcad
hot plate of lotus factory
grabcad
free
Hot Plate
...hot plate
grabcad
hot plate 4 burner
grabcad
free
How hot is it??
...how hot is it??
grabcad
how hot is it??
likes are appreciate it.
Extruder
grabcad
free
extruder
...extruder
grabcad
extruder
grabcad
free
extrude
...extrude
grabcad
extrude
grabcad
free
Extruder
...extruder
grabcad
extruder
grabcad
free
extruder
...extruder
grabcad
extruder
grabcad
free
Extruder
...extruder
grabcad
extruder
grabcad
free
extruder
...extruder
grabcad
extruder
grabcad
free
EXTRUDER
...extruder
grabcad
extruder
grabcad
free
EXTRUDER
...extruder
grabcad
extruder screw
grabcad
free
Extruder
...extruder
grabcad
extruder part 1
grabcad
free
extruder
...extruder
grabcad
sat file of plastic extruder
Ends
grabcad
free
end-to-end with plug-in spike
...end-to-end with plug-in spike
grabcad
end-to-end with plug-in spike
grabcad
free
end
...end
grabcad
alum
grabcad
free
END
...end
grabcad
trail product
grabcad
free
BOSCH REXROTH [End to End Connectors]
...ors]
grabcad
here is the most useful end to end connectors.
may u need it in ur construction lines.
files type: solidworks.parts
grabcad
free
Hose end
...hose end
grabcad
hode end
grabcad
free
end mill
...end mill
grabcad
end mill
grabcad
free
Rod End
...rod end
grabcad
rod end
grabcad
free
end mill
...end mill
grabcad
end mill
grabcad
free
End Cap
...end cap
grabcad
end cap
grabcad
free
EYE END
...eye end
grabcad
eye end
Mount
grabcad
free
mounting
...mounting
grabcad
mounting
grabcad
free
mount
...mount
grabcad
mount
grabcad
free
Mount
...mount
grabcad
mount
grabcad
free
Mount
...mount
grabcad
mount
grabcad
free
mounting
...mounting
grabcad
mounting
grabcad
free
mounting
...mounting
grabcad
pin mounting
grabcad
free
Mount
...mount
grabcad
mount used in the suspension.
grabcad
free
mount
...mount
grabcad
it's a mount
grabcad
free
Mounting
...mounting
grabcad
engine or motor mounting
grabcad
free
Mount
...mount
grabcad
sharing idea for mount