Thingiverse
Ender 3 V2 Rpi 4 Touchscreen for Octoprint/Octoscreen by Distnz
by Thingiverse
Last crawled date: 4 years, 6 months ago
This is a Remix of https://www.thingiverse.com/thing:3030160 & https://www.thingiverse.com/thing:4184628 to mount the Octoprint/Octoscreen console on the sidde of an Ender 3/Pro/V2.
I have ceated the Extension bracket for the V2, as i found without it the power cable for the Rpi4 got in the way of the Z-axis switch so needed to be moved over to fit my Ender 3 V2.
You will need 2x M5 Blots & Nuts for the extension, is use 8mm Bolts.
Will update with photos once fully printed and all mounted up.
The guide i used to set it all up can be found here:https://forum.prusaprinters.org/forum/original-prusa-i3-mk3s-mk3-user-mods-octoprint-enclosures-nozzles-.../3-5-gpio-touchscreenrpi-3band-octoscreen/
I just replaced the section on which drivers to dow ith the appropriate drivers for my screen. I used a MHS3528 from AliExpress.
I have ceated the Extension bracket for the V2, as i found without it the power cable for the Rpi4 got in the way of the Z-axis switch so needed to be moved over to fit my Ender 3 V2.
You will need 2x M5 Blots & Nuts for the extension, is use 8mm Bolts.
Will update with photos once fully printed and all mounted up.
The guide i used to set it all up can be found here:https://forum.prusaprinters.org/forum/original-prusa-i3-mk3s-mk3-user-mods-octoprint-enclosures-nozzles-.../3-5-gpio-touchscreenrpi-3band-octoscreen/
I just replaced the section on which drivers to dow ith the appropriate drivers for my screen. I used a MHS3528 from AliExpress.