Ender 3 Universal Spool Holder by SapuSeven

Last crawled date: 3 years, 4 months ago

I modified the original spool holder model to use M3 screws and 608 bearings.
I also added a ring for the bearings to center the spool.
Required Materials:
4x 608 Ball Bearing
4x M3x16 Bolt
4x M3 Nut
You also need the two M5 bolts and T-slot nuts from the original spool holder.
Assembly:
Put the rings around the bearings
Optionally use a 3mm drill to widen the holes in the spacers
Put two spacers in each bearing
Put each bearing with spacers in a holder and secure it with an M3 screw and nut.
Use the two M5 bolts and T-slot nuts from the original spool holder to attach the new holders on the top in place of the old one.