Ender 3 Pro - X & Y Belt Tensioners by DarkDemon1975

Last crawled date: 3 years, 4 months ago

My take on an X and Y axis belt tensioner. I looked around thingiverse and didnt really see anything I liked so I designed my own.
These tensioners use the stock rollers and T-nuts, etc that come with the machine, but you will need the following additional hardware
X TENSIONER
1 - M4 x 25 CAP HEAD SCREW
1 - M4 NYLOC NUT
1 - M5 x 30 ROUND HEAD SCREW
1 - M5 "MELT IN" NUTSERT (If printing the nutsert knob)
OR
1 - M5 HEX NUT (If printing the hexnut knob)
Y TENSIONER
1 - M4 x 25 CAP HEAD SCREW
1 - M4 NYLOC NUT
1 - M5 x 30 ROUND HEAD SCREW
1 - M5 "MELT IN" NUTSERT (If printing the nutsert knob)
OR
1 - M5 HEX NUT (If printing the hexnut knob)
NOTE: In case you are wondering the "RECT WASHER" is meant to be a tight fit on the M5 Screw, so the screw cuts a thread into the part, screw the part all the way to under the head of the screw (image shown). The purpose of this part is to hold the screw and stop it from rotating when turning the know to tension the belt
I welcome any feedback you might have, I will try to respond to any questions
http://buymeacoffee.com/darkdemon1975