Thingiverse
Ender 3 Hotend Mounting Bracket (Stock Hotend)
by Thingiverse
Last crawled date: 5 years, 9 months ago
A simple remix of the hotend mounting bracket of the Twin Turbofan, to be compatible with this dual 5015 cooler-duct: https://www.thingiverse.com/thing:2767047
This remix removes the small leg on the left side of the mounting bracket so that it's only secured by the 2 screws of the hotend.
It is compatible with the Ender 3 (Pro) / CR10 default hotend (MK8/MK10) and can be used with the stock hardware.
Since it's connected directly to the heatsink via screws if you got too much heat on your heatsink it'll warp - so just make sure you don't print it in PLA first and then use your printer to print ABS ;)
This remix removes the small leg on the left side of the mounting bracket so that it's only secured by the 2 screws of the hotend.
It is compatible with the Ender 3 (Pro) / CR10 default hotend (MK8/MK10) and can be used with the stock hardware.
Since it's connected directly to the heatsink via screws if you got too much heat on your heatsink it'll warp - so just make sure you don't print it in PLA first and then use your printer to print ABS ;)