Thingiverse
End Frames for Condenser Coil Brackets: 2gal bucket + copper tube condenser(moonshine/sanitizer) by kippbits
by Thingiverse
Last crawled date: 5 years, 6 months ago
Frame Footer/Cap for DIY 2 Gal Bucket + Copper Tubing Condenser Coil(moonshine/sanitizer)
Items you will need to build the condenser:
3D Printer
2 gallon hdpe bucket(approx 20cm diameter at bottom)
1/4" od copper tubing(~20ft),
perforated/slotted angle brackets: 1.5inx1.5inx2ft(cut into 3x8" segments)
various brass fittings + npt nuts(to create bulkheads and an to connect to the boiler possibly substitute rubber hose with clamps for much of this)
print both top and bottom(reflection) ...secure with zip-ties.
...first try, angle brackets at bad angle(had to use zip-ties to attach coil). "fix" file should require fewer zip-ties to assemble.
Items you will need to build the condenser:
3D Printer
2 gallon hdpe bucket(approx 20cm diameter at bottom)
1/4" od copper tubing(~20ft),
perforated/slotted angle brackets: 1.5inx1.5inx2ft(cut into 3x8" segments)
various brass fittings + npt nuts(to create bulkheads and an to connect to the boiler possibly substitute rubber hose with clamps for much of this)
print both top and bottom(reflection) ...secure with zip-ties.
...first try, angle brackets at bad angle(had to use zip-ties to attach coil). "fix" file should require fewer zip-ties to assemble.