Encoder knob for TEVO Tarantula Pro by Vitaliy_Sumrak

Last crawled date: 4 years, 5 months ago

PK For CURA tevo_tarantula_draft_pro[general]
version = 4
name = Draft Pro 0.4mm
definition = fdmprinter
[metadata]
quality_type = draft
setting_version = 9
type = quality_changes
[values]
adhesion_type = skirt
layer_height_0 = 0.2
smooth_spiralized_contours = False
support_enable = False
support_type = everywhere
PK ! ˜9Мх@ @ & tevo_tarantula_extruder0#2_draft_pro[general]
version = 4
name = Draft Pro 0.4mm
definition = fdmprinter
[metadata]
position = 0
quality_type = draft
setting_version = 9
type = quality_changes
[values]
cool_fan_full_at_height = 0.6
cool_fan_speed = 50.0
infill_before_walls = False
infill_pattern = zigzag
ironing_enabled = True
ironing_flow = 5
ironing_line_spacing = 0.2
line_width = 0.4
material_final_print_temperature = 215.0
material_initial_print_temperature = 215.0
material_print_temperature = 215
skirt_gap = 5
skirt_line_count = 5
speed_layer_0 = 20
speed_wall = 30
speed_wall_x = 30
support_angle = 70
support_infill_rate = 10
support_pattern = concentric
support_roof_density = 80
support_roof_enable = True