GrabCAD
Enclosure per filamenti
by GrabCAD
Last crawled date: 1 year, 10 months ago
ENCLOSURE PER FILAMENTI
Questa non è una vera e propria guida ma un riferimento, ci sono diverse varianti quindi va adattata ai propri scopi in base alla manualità della persona e ai materiali reperibili o che si riciclano. a partire dalla scatola, all’essiccatore ecc. Pertanto prendete queste pagina come spunto per cimentarvi nella costruzione di un enclosure per filamento personalizzato e adattato alle vostre esigenze.
Ho cercato in fase di progettazione, di rendere questa enclosure quanto più funzionale possibile, cercando di non tralasciare un po' il lato estetico che a me non dispiace curare sinceramente.
L’altezza dalle slitte al coperchio (che ho dovuto alzare di 1cm adattandolo) da modo di contenere bobine da 1 kg, e le slitte sono adattabili in larghezza in base alla dimensione che può avere una bobina (ho cercato di documentarmi sul massimo di larghezza e altezza di bobine per uso hobbistico quindi intorno al kg) sono direzionabili in modo da non creare angoli che diano fastidio o forzature al filamento nel suo percorso. Le bocche a fondo scatola (in totale 6) con attaccati dei raccordi M6 hanno una forma diciamo ergonomica e sono liberi di girare seguendo il filamento, in esse sono inseriti dei classici tubi in ptfe per facilitare lo scorrimento del filo e tenerlo protetto da polvere durante il passaggio dalla scatola al mobile della stampante. Le aperture di uscita nel mio caso sono in basso perché la cassa è appoggiata sul mobile stampante, ma possono variare in base alle esigenze personali. L’interno è rivestito da materiale termoriflettente per evitare dispersione di calore e anche da amplificare un po' l’illuminazione interna data da una semplice lampada a led con interruttore esterno.
Il filamento usato è tutto PETG red scuro marca eSUN, stampato a 245° con bed 80°, infill 100% per evitare eventuali deformazioni al caldo.
La descrizione non è dettagliata semplicemente perché non è complicato come progetto, di certo un po di manualità ci vuole, ma non servono attrezzi particolari per il lavoro, giusto un cutter, un trapano, forbici, matita, righello, ed eventuale seghetto anche a mano perché si lavora su plastica.
All’interno della pubblicazione ci sono tutte le foto con sequenza e spiegazioni, file .stl e file .parts per solidworks che potete usare modificare e adattare. E’ compresa una lista materiali con link per avere dei punti di riferimento
Per favore se esponete il lavoro altrove chiedo solo di essere citato (come regola giusta tra i makers). Se avete bisogno contattatemi, buon lavoro da “NanoDesigner” e grazie.
NB. Nel post pubblico di thingiverse ci sono solo 2 stl allegati per apparenza, questo perchè thingiverse richiede obbligo di allegare almeno 1 file stl. Tranquilli erano molti, ma ho messo tutti i file nell'archivio.rar quindi prendete quello.
ENGLISH (GOOGLE TRANSLATION)
ENCLOSURE FOR FILAMENTS
This is not a real guide but a reference, there are different variants so it must be adapted to your purposes based on the manual skills of the person and the materials available or that are recycled. starting from the box, to the dryer etc. So take this page as a starting point to try your hand at building a custom filament enclosure tailored to your needs.
I tried in the design phase to make this enclosure as functional as possible, trying not to neglect a bit the aesthetic side that I don't mind looking after sincerely.
The height from the slides to the lid (which I had to raise by 1cm by adapting it) to contain 1 kg reels, and the slides are adaptable in width according to the size that a reel can have (I tried to find out about the maximum width and reel height for hobby use therefore around 1 kg) can be directed so as not to create angles that bother or force the filament in its path. The mouths at the bottom of the box (in total 6) with M6 fittings attached have an ergonomic shape and are free to rotate following the filament, they are inserted in the classic PTFE tubes to facilitate the sliding of the wire and keep it protected from dust during the transition from the box to the printer cabinet. The outlet openings in my case are at the bottom because the cash desk is placed on the printer cabinet, but they can vary according to personal needs. The interior is covered with heat-reflecting material to avoid heat loss and also to slightly amplify the internal lighting given by a simple LED lamp with an external switch.
The filament used is all dark red PETG eSUN brand, printed at 245 ° with bed 80 °, 100% infill to avoid any deformation in the heat.
The description is not detailed simply because it is not complicated as a project, certainly a bit of manual skill is needed, but no special tools are needed for the job, just a cutter, a drill, scissors, pencil, ruler, and any hacksaw even by hand. because we work on plastic.
Inside the publication there are all the photos with sequence and explanations, .stl files and .parts files for solidworks that you can use to modify and adapt. A material list is included with links for reference points
Please if you exhibit the work elsewhere I only ask to be cited (as a right rule among makers). If you need to contact me, good job from “NanoDesigner” and thanks.
NB. In the thingiverse public post there are only 2 stl attached by appearance, this is because thingiverse requires you to attach at least 1 stl file. Quiet there were many, but I put all the files in the archive.rar so take that.
Questa non è una vera e propria guida ma un riferimento, ci sono diverse varianti quindi va adattata ai propri scopi in base alla manualità della persona e ai materiali reperibili o che si riciclano. a partire dalla scatola, all’essiccatore ecc. Pertanto prendete queste pagina come spunto per cimentarvi nella costruzione di un enclosure per filamento personalizzato e adattato alle vostre esigenze.
Ho cercato in fase di progettazione, di rendere questa enclosure quanto più funzionale possibile, cercando di non tralasciare un po' il lato estetico che a me non dispiace curare sinceramente.
L’altezza dalle slitte al coperchio (che ho dovuto alzare di 1cm adattandolo) da modo di contenere bobine da 1 kg, e le slitte sono adattabili in larghezza in base alla dimensione che può avere una bobina (ho cercato di documentarmi sul massimo di larghezza e altezza di bobine per uso hobbistico quindi intorno al kg) sono direzionabili in modo da non creare angoli che diano fastidio o forzature al filamento nel suo percorso. Le bocche a fondo scatola (in totale 6) con attaccati dei raccordi M6 hanno una forma diciamo ergonomica e sono liberi di girare seguendo il filamento, in esse sono inseriti dei classici tubi in ptfe per facilitare lo scorrimento del filo e tenerlo protetto da polvere durante il passaggio dalla scatola al mobile della stampante. Le aperture di uscita nel mio caso sono in basso perché la cassa è appoggiata sul mobile stampante, ma possono variare in base alle esigenze personali. L’interno è rivestito da materiale termoriflettente per evitare dispersione di calore e anche da amplificare un po' l’illuminazione interna data da una semplice lampada a led con interruttore esterno.
Il filamento usato è tutto PETG red scuro marca eSUN, stampato a 245° con bed 80°, infill 100% per evitare eventuali deformazioni al caldo.
La descrizione non è dettagliata semplicemente perché non è complicato come progetto, di certo un po di manualità ci vuole, ma non servono attrezzi particolari per il lavoro, giusto un cutter, un trapano, forbici, matita, righello, ed eventuale seghetto anche a mano perché si lavora su plastica.
All’interno della pubblicazione ci sono tutte le foto con sequenza e spiegazioni, file .stl e file .parts per solidworks che potete usare modificare e adattare. E’ compresa una lista materiali con link per avere dei punti di riferimento
Per favore se esponete il lavoro altrove chiedo solo di essere citato (come regola giusta tra i makers). Se avete bisogno contattatemi, buon lavoro da “NanoDesigner” e grazie.
NB. Nel post pubblico di thingiverse ci sono solo 2 stl allegati per apparenza, questo perchè thingiverse richiede obbligo di allegare almeno 1 file stl. Tranquilli erano molti, ma ho messo tutti i file nell'archivio.rar quindi prendete quello.
ENGLISH (GOOGLE TRANSLATION)
ENCLOSURE FOR FILAMENTS
This is not a real guide but a reference, there are different variants so it must be adapted to your purposes based on the manual skills of the person and the materials available or that are recycled. starting from the box, to the dryer etc. So take this page as a starting point to try your hand at building a custom filament enclosure tailored to your needs.
I tried in the design phase to make this enclosure as functional as possible, trying not to neglect a bit the aesthetic side that I don't mind looking after sincerely.
The height from the slides to the lid (which I had to raise by 1cm by adapting it) to contain 1 kg reels, and the slides are adaptable in width according to the size that a reel can have (I tried to find out about the maximum width and reel height for hobby use therefore around 1 kg) can be directed so as not to create angles that bother or force the filament in its path. The mouths at the bottom of the box (in total 6) with M6 fittings attached have an ergonomic shape and are free to rotate following the filament, they are inserted in the classic PTFE tubes to facilitate the sliding of the wire and keep it protected from dust during the transition from the box to the printer cabinet. The outlet openings in my case are at the bottom because the cash desk is placed on the printer cabinet, but they can vary according to personal needs. The interior is covered with heat-reflecting material to avoid heat loss and also to slightly amplify the internal lighting given by a simple LED lamp with an external switch.
The filament used is all dark red PETG eSUN brand, printed at 245 ° with bed 80 °, 100% infill to avoid any deformation in the heat.
The description is not detailed simply because it is not complicated as a project, certainly a bit of manual skill is needed, but no special tools are needed for the job, just a cutter, a drill, scissors, pencil, ruler, and any hacksaw even by hand. because we work on plastic.
Inside the publication there are all the photos with sequence and explanations, .stl files and .parts files for solidworks that you can use to modify and adapt. A material list is included with links for reference points
Please if you exhibit the work elsewhere I only ask to be cited (as a right rule among makers). If you need to contact me, good job from “NanoDesigner” and thanks.
NB. In the thingiverse public post there are only 2 stl attached by appearance, this is because thingiverse requires you to attach at least 1 stl file. Quiet there were many, but I put all the files in the archive.rar so take that.
Similar models
thingiverse
free
Enclosure per filamenti by Nanodesigner
...verse requires you to attach at least 1 stl file. quiet there were many, but i put all the files in the archive.rar so take that.
thingiverse
free
Guida per filamento Anet A8 by mrcamarium
...che se ci sono molti che ne propongono più versioni questo modello che ho realizzato non da fastidio dal punto di vista estetico.
3dwarehouse
free
candelabro
...aborato ed in cui è subentrato anche il colore. infine ho trasportato il progetto sul sito sketchup creandone una versione in 3d.
thingiverse
free
convogliatore 40x40x10 mm by ThePieWalker
...supporti.
la ventola si fissa al convogliatore mediante 2 viti m2, ed il convogliatore con 2 viti m3 al corpo dell'estrusore.
thingiverse
free
valmax2 by valmax2
...e a qualcuno interessa tra un po lo condivido, ultima cosa l'ho diviso in due per stamparlo perché uscivano dal piano stampa.
grabcad
free
ADATTATORE LATO FRIZIONE (SX)
...gato il diametro del foro per fare entrare con poca pressione lo specchietto di modo tale da non farlo muovere una volta stretto.
thingiverse
free
SUPPORTO MICROSWITCH PER SENSORE FINE FILAMENTO by philfire
...tere tutta la stampa, con conseguente perdita di tempo e denaro. è previsto il fissaggio sulla parete in acrilico della prusa i3.
3dwarehouse
free
humansareawesome
...oppo in quest'epoca che ci ritroviamo ad affrontare non sembra così essere. ci ripigliamo? #comunicazione #immenso #paradosso
thingiverse
free
Sharebot NG mk8 bowden-to-direct extruder mount plate by cellino92
... del j head che con le ritrazioni torna su, essendo l'estrusore bowden. non è quindi necessaria se avete una versione direct.
thingiverse
free
Bugs2 Mini Flame Wheel Style by MR01
...preciso sulla base quindi posizionatelo con cura, avrei voluto allargare o allungare la base ma non ho le capacità 3d necessarie.
Filamenti
thingiverse
free
Supporto estrusore per filamenti flessibili (support ninjaflex filaments) by Suffre0
...to estrusore per filamenti flessibili (support ninjaflex filaments) by suffre0
thingiverse
extruder support for rubber filaments
thingiverse
free
Extruder flex filament Ultimaker 1.75 by Suffre0
...flex filament ultimaker 1.75 by suffre0 thingiverse estrusore per filamenti flessibili, monta con ruota dentata originale ultimaker, per filamenti...
thingiverse
free
Enclosure per filamenti by Nanodesigner
...verse requires you to attach at least 1 stl file. quiet there were many, but i put all the files in the archive.rar so take that.
thingiverse
free
guida filo Anet ET4 pro by wakefield1945
...con cuscinetto a sfere e puleggia con gola per filamenti da 1.75...
thingiverse
free
Tabiger Soldering Iron Holder by betalab
...60 watthttps://www.amazon.it/hictop-cr-10s-monitor-filamenti-stampante/dp/b075m8jfwg/ref=as_li_ss_tl?ie=utf8&qid=1522957504&sr=8-3&keywords=creality+cr-10&linkcode=sl1&tag=betashop-21&linkid=9bbbf1eac6699ee5247480b2902f4fd1 digital caliperhttps://www.amazon.it/hictop-cr-10s-monitor-filamenti-stampante/dp/b075m8jfwg/ref=as_li_ss_tl?ie=utf8&qid=1522957504&sr=8-3&keywords=creality+cr-10&linkcode=sl1&tag=betashop-21&linkid=9bbbf1eac6699ee5247480b2902f4fd1 mini drill ( new model )https://www.amazon.it/hictop-cr-10s-monitor-filamentistampante/dp/b075m8jfwg/ref=as_li_ss_tl?ie=utf8&qid=1522957504&sr=8-3&keywords=creality+cr-10&linkcode=sl1&tag=betashop-21&linkid=9bbbf1eac6699ee5247480b2902f4fd1 ...
thingiverse
free
REBEL Spinner by TominoCZ
...you wanted to check that out, here's a link: http://tiny.cc/multi-filamentir ...
thingiverse
free
Mini Filament clip 1.75mm by clmake
...mini filament clip 1.75mm by clmake thingiverse mini filamenti holder designed by cl make with freecad. i design...
thingiverse
free
Bobinator by Ardesi_Marco
...easily interchangeable. anti roll out! portabobine da muro per filamenti con bobina largha o stretta. facilmente intercambiabile. anti uscita...
thingiverse
free
Jewelry box by Indianin666
...and has a very pleasant texture.
2019.07.01 i added a lid without any patterns
i've added the box version without butterflies
thingiverse
free
Filoalfa Universal Temp Tower by Filoalfa3d
...temperatura che permette di valutare il comportamento di diversi filamenti permette di utilizzarla con ogni materiale, basta scrivere il...
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Per
turbosquid
$70
Pers
...pers
turbosquid
royalty free 3d model pers for download as on turbosquid: 3d models for games, architecture, videos. (1288905)
3d_export
$5
mmorpg pers
...mmorpg pers
3dexport
pers for mmorpg ,rpg
3d_export
$40
Pers 3D Model
...pers 3d model
3dexport
pers 3d model 666cepesh666 73023 3dexport
turbosquid
$10
scala per piscina
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$13
Delaktig 2 pers sofa
... model delaktig 2 pers sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1482218)
turbosquid
$9
Chandra rugs PER-15403
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Chandra rugs PER-15400
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Per oberg table (Soffbord)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
globo-Mobile sospeso per lavabo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Compressor Dalgakiran flow rate 45m3 per minute
...compressor dalgakiran flow rate 45m3 per minute
3dexport
compressor dalgakiran, with a constant air capacity of 45m3 per minute