Thingiverse
Enclosure for Raspberry Pi 3 + TFT3.5'' + DAC PCM5102K - Squeezebox by grostim
by Thingiverse
Last crawled date: 4 years, 8 months ago
Hi !
This is an enclosure for my squeezebox project.
I need to install the following equipment inside:
Raspberry Pi 3 : http://www.gearbest.com/raspberry-pi/pp_488334.html?lkid=10899003
A waveshare (or clone) 3.5'' TFT for Raspberry: https://fr.aliexpress.com/item/Free-shipping-LCD-module-Pi-TFT-3-5-inch-320-480-Touchscreen-Display-Module-TFT-for/32587995145.html
A DAC PCM5102K:https://fr.aliexpress.com/item/PCM5102-DAC-Decoder-I2S-Player-Assembled-Board-32Bit-384K-Beyond-ES9023-PCM1794-compatible-Raspberry-Pi/32678406932.html
I use max2play as software, but any Linux variant for the Pi should be ok.
You can improve my design using the fusion 360 project:http://a360.co/2s5AMXU
Known issues and release notes:
Initial Version (Fusion 360 v27)
1- the screen slot is a very tight fit with my printer. You may want to print it upscaled by 101% or so.
2 - For some reason the holes for the RCA barrel are too high by about 1mm.
3 -The recess in the cover is too small for the pins sticking out of the screen.
4 - the tabs on the cover are much too fragile.
5 - The hole for the jack barrell of the RasPi is too small.
6 - The opening for the HDMI slot could be enlarged too.
First Revision (Fusion 360 v29)
Correction of issues 2, 3, 4, 5, 6 of the previous version.
1 - The tabs of the cover are still very fragile. Any advices welcome.
Please let me know if you have tested my design and what you think about it !
This is an enclosure for my squeezebox project.
I need to install the following equipment inside:
Raspberry Pi 3 : http://www.gearbest.com/raspberry-pi/pp_488334.html?lkid=10899003
A waveshare (or clone) 3.5'' TFT for Raspberry: https://fr.aliexpress.com/item/Free-shipping-LCD-module-Pi-TFT-3-5-inch-320-480-Touchscreen-Display-Module-TFT-for/32587995145.html
A DAC PCM5102K:https://fr.aliexpress.com/item/PCM5102-DAC-Decoder-I2S-Player-Assembled-Board-32Bit-384K-Beyond-ES9023-PCM1794-compatible-Raspberry-Pi/32678406932.html
I use max2play as software, but any Linux variant for the Pi should be ok.
You can improve my design using the fusion 360 project:http://a360.co/2s5AMXU
Known issues and release notes:
Initial Version (Fusion 360 v27)
1- the screen slot is a very tight fit with my printer. You may want to print it upscaled by 101% or so.
2 - For some reason the holes for the RCA barrel are too high by about 1mm.
3 -The recess in the cover is too small for the pins sticking out of the screen.
4 - the tabs on the cover are much too fragile.
5 - The hole for the jack barrell of the RasPi is too small.
6 - The opening for the HDMI slot could be enlarged too.
First Revision (Fusion 360 v29)
Correction of issues 2, 3, 4, 5, 6 of the previous version.
1 - The tabs of the cover are still very fragile. Any advices welcome.
Please let me know if you have tested my design and what you think about it !