EmonTX shield & Yun enclosure (Power Monitor Box) by xerox1821

Last crawled date: 3 years, 11 months ago

This is the first version of the enclosure I created for EmonTX shield and Arduino Yun boards.
EmonTX shield is a board from openenergymonitor.org that can be used with an Arduino, to measure the Power Consumption at home.
This version is based on the grate work of "Arduino OpenSCAD mounting library (v2.0)", by kellyegan.
The box has 2 lids. The top lid -that is sealing the box- and the CTs lid. This lid was needed, since the board have a lot of components like USBs, Power, CTs in the different faces of the box.
Mounting Instructions
First you put in place the Arduino Yun and screw on the box.
Then you attach the CTs lid on the EmonTX shield and then you put the shield on top of Arduino.
The top lid has a window in order to be able to see the led of the board when is blinking. There is a window printed part that you can print with transparent filament and put in place.
At the end close the box with the top lid.
Included files:
EmonTX-box.stl - is the enclosure
EmonTX-CTs_lid.stl - is the CTs lid
EmonTX-box_lid.stl - is the top lid
EmonTX-lid_led.stl - is the "window" of the top lid
I am still working on some fixes.
In the next version, the openscad files will be also provided.