EML PoLyca I Lightbar Base

Last crawled date: 2 years, 11 months ago

EML PoLyca 1 The EML PoLyca I is formed by 3 parts: 1.Polycarbonate Case: This is a hard polycarbonate case.It is weather-,impact-,and vibration-resistant. 2.Center Module: The rectangular box inside the polycarbonate case.This can be used for mounting on virutally anything: LED strobes/flip-up LED text matrix/additional integrated antennaes or communications equipment/LRAD/PA/sirens/etc. 3.Mounting Module: The rectangular box situated directly under the case.This is mounted directly on the roof of the vehicle.Integrated inside is everything,wiring,controls,etc.Anything can be mounted inside the module or directly on top of it (inside the case): LEDs/strobes/rotators/etc. My initial purpose was to make a lightbar that had blue and red rotators on the sides,LEDs in the middle and a LED matrix text display that would flip up from the Centre Module via a small motor. But I was too bored to do it,so I decided to upload the base as it is.It is compatible with thelightbarguy's BYLOB or any other strobes/LEDs/etc. you might find on the Internet to make it your own.Or simply do a component yourself.It's not that hard afterall. Modeled entirely by me.You are free to include this in any collection.You are free to use or modify this in any way as long as you specify that this is the original model and that I am the original author. Low poly,but good detail. If you don't like it.. Well you know what the honey badger doesn't give. 2011 awesum