Thingiverse
Embossing Plates - Bird Branch by faydra6410
by Thingiverse
Last crawled date: 4 years, 1 month ago
Embossing Board Dimensions
Full Board 222.00 x 140.00
Half Board 140.00 x 111.00
or Scale down for bed.
If wanted to be used with the Helix Craft Room Boards needs to be:
Full 310 mm x 220 mm
Half 155 mm x 220 mm
Scale to fit.
I used PLA to keep the sharp corners but be careful with the embossing tool not to press to hard and ripped the card. Embossing tools used were 6 mm diameter and for the fine detail I used a 3.5mm
Full Board 222.00 x 140.00
Half Board 140.00 x 111.00
or Scale down for bed.
If wanted to be used with the Helix Craft Room Boards needs to be:
Full 310 mm x 220 mm
Half 155 mm x 220 mm
Scale to fit.
I used PLA to keep the sharp corners but be careful with the embossing tool not to press to hard and ripped the card. Embossing tools used were 6 mm diameter and for the fine detail I used a 3.5mm