Thingiverse
Element Enduro SSD Front Bumper Mount
by Thingiverse
Last crawled date: 5 years, 6 months ago
This is a front bumper mount for the Element Enduro chassis to the SSD Rock Shield Wide front bumper made for the SCX10ii.
This bumper, as sold, does not work on the Element Enduro. Just remove the SCX10ii mount, and put this mount on using the same hardware. Recommend using 20mm or longer screws when attaching it to the chassis.
There are two versions of the *.STL, one is shaped like the original Enduro mount. The older has a wide flat surface for mounting electronics on. Both have the center pass-through for the winch line.
This bumper, as sold, does not work on the Element Enduro. Just remove the SCX10ii mount, and put this mount on using the same hardware. Recommend using 20mm or longer screws when attaching it to the chassis.
There are two versions of the *.STL, one is shaped like the original Enduro mount. The older has a wide flat surface for mounting electronics on. Both have the center pass-through for the winch line.