Elegoo Saturn Vat Holder Remix by devsfan1830

Last crawled date: 3 years, 3 months ago

Remixed the original vat holder tray by soswow slightly to allow for incorporating heat set brass inserts. This allows you to use the Saturns vat screws to sandwich the vat between the V1 cover and this remixed holder creating a storage solution for a vat filled with resin. It will likely not be even remotely spill resistant so still dont tip the vat when moving it. But this way you can store a full vat off the machine in perhaps a light and airtight container without needing to empty the vat between prints.
I used M4x4x5.2 inserts inserted with a standard soldering iron pencil tip. The easiest way to get them is probably with this assortment pack: https://www.ebay.com/itm/330pcs-M2-M3-Brass-Insert-Nut-Isolation-Column-Knurl-Insert-Nut-Kit/154040505277?hash=item23dd8793bd:g:lBMAAOSwDUpfMgTf
I used black petg but any purely opaque material should do fine.