Thingiverse
Elegoo Neptune Filament Roller Guide by Caladonis
by Thingiverse
Last crawled date: 3 years, 11 months ago
Elegoo Neptune Filament Idler.
This is a quick print that comes in two versions.
One with and one without a required 608 skate bearing.
You will need to print only one -- either with or without a 608 bearing
I prefer the one with the press fit bearing.
You MAY need to print the 608BearingSleeve at 101% if it is too snug.
This is a quick print that comes in two versions.
One with and one without a required 608 skate bearing.
You will need to print only one -- either with or without a 608 bearing
I prefer the one with the press fit bearing.
You MAY need to print the 608BearingSleeve at 101% if it is too snug.