Elegoo Neptune 2 Bullseye Mount by Badger_Fish

Last crawled date: 3 years, 1 month ago

This is a mount that will replace the stock hotend shroud on the Elegoo Neptune 2, so it fits a Bullseye cooler.
You'll need the stock screws for the shroud and the 40mm fan.
The blower is attached with hotmelt glue to the default shroud so it will have to be removed.
You'll have to slightly modify the bullseye with nippers, it'll be obvious.
V26 should be the basic version.
V30 is a prototype, but could provide more cable strain relief.
You'll need:
2 M3-8 screws to mount the cooler.
2 M3 nuts to shove into the captive nut screws, they might need a bit of filing.
2 M2-10 or -12 screws to screw the blower to the bullseye.
Small zip ties in your choice of color.
A bullseye cooler mod.