Thingiverse
Elegoo Mars Pro Build Plate Dripper
by Thingiverse
Last crawled date: 5 years, 2 months ago
I am new to Eleegoo Mars Pro since Feb 2020. I failed to print the Build Plate Angled Holder, coz I could not figure out the support.
I decided to create my own, so I can print it flat with minimal support.
This .stl file is different from the picture I took. I adjusted the holder rectangular to a smaller size 31x21mm after the first print.
You need to get two pairs of M3x16 hex bolts and nuts to fasten the dripper.
I decided to create my own, so I can print it flat with minimal support.
This .stl file is different from the picture I took. I adjusted the holder rectangular to a smaller size 31x21mm after the first print.
You need to get two pairs of M3x16 hex bolts and nuts to fasten the dripper.