Eleduino Raspberry Pi rainbow case stand by wolf9545

Last crawled date: 3 years ago

I liked and used rewsiffer's raspberry pi upgright mount; http://www.thingiverse.com/thing:1263396. I used it to mount my Raspberry Pi (with a case) to the back of my dresser. You can look at the "made" section on this page to see how I use it.
I have a "rainbow" case from eleduino (http://www.eleduino.com/Rainbow-Case-for-Raspberry-pi-3-model-B-and-Raspberry-pi-2-model-B-Development-Board-p10428.html) that I wanted to put in my other Raspberry Pi. The problem is the screws for the case do not go through the Raspberry Pi mounting holes but around the outside of the case. I had to design a new mounting bracket to allow me to use the case. I wanted to use my case so I would not have the raw circuit board exposed.
I guess this is not a true remix of a part since I only used his model as a reference. I did not actually modify his design.
I wanted to be able to screw the M3 bolts into the base and not force them in. If you use a M3 tap you will be able to create threads in the holes. That way you will be able to screw / unscrew the bolts easily. I also created a countersink for the two holes to mount the stand to a surface. That way the heads of the drywall screws sit more flush with the stand.
I have included the Fusion 360 file if you want to edit this stand.
Filament is Hatchbox's Purple:https://www.amazon.com/HATCHBOX-3D-PLA-1KG1-75-PUR-Filament-Dimensional/dp/B00MEZDRPO/ref=sr_1_15?s=industrial&ie=UTF8&qid=1492725225&sr=1-15&keywords=hatchbox+pla+1.75