Cults
Electronic case for Arduino Mega 2560 + Ramps 1.4 + LCD 2004 - 3D Modular Systems
by Cults
Last crawled date: 7 years, 3 months ago
This case corresponds to version 2.5 of the current case.
It allows to accommodate
- An Arduino Mega 2560 card
- A Ramps 1.4 card
- LCD screen RRD LCD 2004
- An 80mm fan.
This box is modular, which means that you print each facade you screw to each other using M3X8 Thermoplastic Screws.
If you want to fit one of the front panels it's very simple, you just have to unscrew one of the front and replace it with your own while retaining the other parts of your case.
This box is designed to be fixed on aluminum profiles 30mm wide.
You will need M6X12mm screws and hammer nut to attach it to the profile.
3D Modular Systems
3D Evolutive Printer
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters
It allows to accommodate
- An Arduino Mega 2560 card
- A Ramps 1.4 card
- LCD screen RRD LCD 2004
- An 80mm fan.
This box is modular, which means that you print each facade you screw to each other using M3X8 Thermoplastic Screws.
If you want to fit one of the front panels it's very simple, you just have to unscrew one of the front and replace it with your own while retaining the other parts of your case.
This box is designed to be fixed on aluminum profiles 30mm wide.
You will need M6X12mm screws and hammer nut to attach it to the profile.
3D Modular Systems
3D Evolutive Printer
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters