Thingiverse
Electronic Case for AGraber by edulago
by Thingiverse
Last crawled date: 5 years, 3 months ago
An electronic case for AGraber. This electronics box accommodates the Arduino Mega, RAMPS 1.4, 2 mosfets and an 80mm fan.
Base, Fan Grill and Cover Grill are mandatory. Cover is provided in a full single piece and in exploded versions. If you have layer separation problems print large volumes, choose the exploded version and stick parts together with cyanoacrylate or other appropriate glue.
Eletronic must be fixed with M3 screws 10mm (length). Cover can be fixed with M3 12mm screws.
Holes for electronic fixing are 2.5mm diameter as the holes in cover. They are perfect size to use a M3 thread tool (tap).
Base, Fan Grill and Cover Grill are mandatory. Cover is provided in a full single piece and in exploded versions. If you have layer separation problems print large volumes, choose the exploded version and stick parts together with cyanoacrylate or other appropriate glue.
Eletronic must be fixed with M3 screws 10mm (length). Cover can be fixed with M3 12mm screws.
Holes for electronic fixing are 2.5mm diameter as the holes in cover. They are perfect size to use a M3 thread tool (tap).