Thingiverse
electric Longboard conversion by daishixsi
by Thingiverse
Last crawled date: 4 years, 4 months ago
These are the files for converting a longboard to an electric one.
I used a Globe Prowler for it.
The top speed is around 30km/h.
You will also need a motor (NTM 50/60 380 kv),
an RC car esc 120A,
a remote (Hobbyfly GT2b)
some batteries (3200mAh 4s), I use two in parallel for a range of 8-9km.
a HTD5m 15mm belt, 275mm length
M5 screws and nuts for the brackets
M4 screws and nuts for the motor mount blade and to connect the pulley to the wheel.
I made the blade of the motor mount using a 6mm fiberglass sheet, the rest was printed
using Carbonfil filament.
The motor pulley is connected to the motor using the propeller adapter that came with the motor.
update: I drove the skateboards for around 200 km now and it is still working great!
I used a Globe Prowler for it.
The top speed is around 30km/h.
You will also need a motor (NTM 50/60 380 kv),
an RC car esc 120A,
a remote (Hobbyfly GT2b)
some batteries (3200mAh 4s), I use two in parallel for a range of 8-9km.
a HTD5m 15mm belt, 275mm length
M5 screws and nuts for the brackets
M4 screws and nuts for the motor mount blade and to connect the pulley to the wheel.
I made the blade of the motor mount using a 6mm fiberglass sheet, the rest was printed
using Carbonfil filament.
The motor pulley is connected to the motor using the propeller adapter that came with the motor.
update: I drove the skateboards for around 200 km now and it is still working great!