El martillo eléctrico multiusos de Homero! Para todos sus golpeteos! :: Homer's all-purpose electric hammer! for all your pounding needs! by naahuel 3d model
3dmdb logo
Thingiverse
El martillo eléctrico multiusos de Homero! Para todos sus golpeteos! :: Homer's all-purpose electric hammer! for all your pounding needs! by naahuel

El martillo eléctrico multiusos de Homero! Para todos sus golpeteos! :: Homer's all-purpose electric hammer! for all your pounding needs! by naahuel

by Thingiverse
Last crawled date: 3 years, 2 months ago
Español
Uno de los cuatro más grandes inventos en la historia de la humanidad!
El martillo eléctrico multiusos de Homero! Para todos sus golpeteos!
Tal vez necesita más potencia...
https://www.youtube.com/watch?v=zYDge7us97k
Instrucciones
Todas las piezas están orientadas en la forma recomendada. Muchas necesitan soportes, pero solo pequeños, para los ejes y cosas así.
La cabeza del martillo necesita ser pegada.
También se deben pegar las tapas del mango y del cilindro porque entran bastante sueltas.
Para el cable, use un trozo de filamento de 1.75mm!
Use un poco de cinta roja para agarrar el cilindro con el mango.
Opcionalmente puedes imprimir el STL "Red Tape" que es una cinta de 0.2mm de alto, pegar el cilindro al mango de alguna forma (yo usé pegamento y la sujeté temporalmente con cinta de papel) y después pegar la cinta roja impresa.
El modelo es solo para exposición, "no funciona" (demás está decir). Se mueve un poco raro y es porque mi idea era ser lo más fiel posible a las imágenes de referencia y no hacer algo funcional.
Diseño en Onshapehttps://cad.onshape.com/documents/237d665cff2cb1dff3af60aa/w/4943abde472da59d2c6d9fa1/e/68c9f24ac75f6b76f342ac38
English
One of the four's greatest inventions in the history of mankind!
Homer's all-purpose electric hammer! for all your pounding needs!
Probably needs to be more powerful...
https://www.youtube.com/watch?v=e39nFQrTsXg
Instructions
All the pieces are oriented in the recommended way. Many of them need supports! But very small supports, just for the axes and such.
The hammer head needs to be glued together.
For the cable, use a little piece of 1.75mm filament!
Use some red tape to attach the small cylinder to the handle.
Optionally, you can print the "Red Tape" STL which is a 0.2mm height tape. Attach the cylinder to the handle (I used some glue and held it in place with masking tape) and then glued the printed tape.
This model is just for show, it "doesn't work" (needless to say). It moves a bit awkward because my idea was to make it as close as possible to the original design from the series (based on the reference images) and not as much for it to be functional.
Onshape designhttps://cad.onshape.com/documents/237d665cff2cb1dff3af60aa/w/4943abde472da59d2c6d9fa1/e/68c9f24ac75f6b76f342ac38

Tags