Thingiverse
Effector and plates by Lykle
by Thingiverse
Last crawled date: 4 years, 7 months ago
Here is a new effector for the BI v2.6.
It uses magnetic joints and is designed for the E3D V6 hotends.
Up to three can be fitted, but you might run into heat problems as the hot air will have nowhere to go.
The whole assembly consists of the effector and three new plates to hold the V6's and a batwing to lock it into place. Of course you need 3 batwings.
This is used with Brian's magnetic ball conversion. http://www.thingiverse.com/thing:883347
It uses magnetic joints and is designed for the E3D V6 hotends.
Up to three can be fitted, but you might run into heat problems as the hot air will have nowhere to go.
The whole assembly consists of the effector and three new plates to hold the V6's and a batwing to lock it into place. Of course you need 3 batwings.
This is used with Brian's magnetic ball conversion. http://www.thingiverse.com/thing:883347