Thingiverse
EEZYbotARM - Modifications by NickJallday
by Thingiverse
Last crawled date: 3 years ago
So I noticed on the horizontal arm the screw head kept hitting the linkage screw next to it so I made a horizontal arm with an intent for the screw.
I also made the finger a bit longer and added finger tips to aid in picking things up. I also made them a bit easier to print by making the square locking indents threw holes instead of needing supports.
I took AtomKemps super compact pan tilt camera mount and modified it a bit and put it on a pole connected to the horizontal arm. (using it for a wifi rover).
I'm also working on a another servo to attach to the fingers linkage so the fingers can tilt up and down.
More to follow.
I also made the finger a bit longer and added finger tips to aid in picking things up. I also made them a bit easier to print by making the square locking indents threw holes instead of needing supports.
I took AtomKemps super compact pan tilt camera mount and modified it a bit and put it on a pole connected to the horizontal arm. (using it for a wifi rover).
I'm also working on a another servo to attach to the fingers linkage so the fingers can tilt up and down.
More to follow.
Similar models
thingiverse
free
OpenRC Truggy Linkage by rudimeyer
...rew hole is 4mm, so there is some tolerance for a m3 screw to move in. use a washer between the screw-head and linkage if needed.
thingiverse
free
Ikea Symfonisk Wall Mount - Adjustable Pitch and Tilt by Gronis
... also made an adapter for ikea symfonisk speaker, but there is also a generic connector provided so you can screw on any speaker.
thingiverse
free
Kiwico Arcade Grabber Fingers, Bar, and Linkage by kageurufu
...kids also smashed their arcade grabber, but they snapped a bar and the linkage.
i redesigned those to accompany the fingers here.
thingiverse
free
Stackable Spice Rack
... be included. two types of drawers and two heights as well. you will need 2 braces, and use m4 screws ( i used old laptop screws)
thingiverse
free
Frog Box - Better Cam Arm by sej7278
...ilicone tubing to put in it and its too loose, had to glue it in place.
the only good thing about the original design is the lid.
thingiverse
free
Peon 230 Race Edition by Dave855
...https://www.youtube.com/watch?v=e-se8v1hudyhttps://www.youtube.com/watch?v=6xrldemhpashttps://www.youtube.com/watch?v=aufgitu6n6e
thingiverse
free
Arduino-Controlled Servo Arm by d_goodman
...rvos, so i printed some linkages and did up some code in arduino and matlab to run the arm using the joystick shield for arduino.
thingiverse
free
Traxxas Rustler Wing by JonBoy11
...gap between the mounting bar and bottom of the wing as well as improving the countersinks for the screws. v2 is what is pictured.
thingiverse
free
Hex bit finger wrench by Klave
...tool holder so i can easily place and remove it. i also put a magnet in the wrench top to stick it to the nearest piece of steel.
thingiverse
free
Ender 5 Plus Heatbed Strain Relief by ussducky
...hat was what i had on hand. i t-nuts are also from the filament sensor that came with my printer, so it's mostly re-use here.
Nickjallday
thingiverse
free
Samsung Galaxy J1 Phone Case by NickJallday
...re not many phone cases available for this particular phone and it would have taken at least a month to receive one in the mail.
thingiverse
free
NinjaFlex PS4 Joystick Extentions by NickJallday
...39;t stay on the controller so i made it a bit more snug and added a locking lip on the bottom of the extension. works great now.
thingiverse
free
Horizontal Blinds bracket (Clip-in Version) by NickJallday
...s that require a clip in type bracket for installation. i printed this at .4mm nozzle, .3mm layer height, 40% infill, abs 230/90.
thingiverse
free
Petsfang Bullseye Titan Extruder Direct Drive Mount by NickJallday
...zmaile's design (https://www.thingiverse.com/thing:3808078), but i wanted something i could use with my e3dv6. so here it is!
thingiverse
free
Ender 3 Pro tilted Display Spacer v2 by NickJallday
... the tilted displace spacer, but the original stl has some mesh errors and my slicer wouldn't slice it correctly. so i fixed.
thingiverse
free
4WD RC Smart Car Chassis (Split Main Structure) by NickJallday
... printer, so i split his main structure's .stl into two pieces, you'll need 4x 10mm 3m screws and 4x 3m nuts to assemble.
thingiverse
free
Justfalters Swivel Mount - Modded to use Z axis Hole by NickJallday
...ci. so i modded the mount to be able to use the preexisting stock hole. it uses all the same hardware his/her original design is.
thingiverse
free
Davinci 1.0/1.0A Z-AXIS Weight (REMIX) by NickJallday
...ks a bit more robust
reduced its wall size to add clearance to the back of the printer
made clearance for the z axis home sensor.
thingiverse
free
9-18V Motor (RadioShack) Gearbox by NickJallday
...remel tool to smooth our where the motor mounts. i may need to update those sizes for the holes but that worked just fine for me.
Eezybotarm
thingiverse
free
EEZYbotARM baseplate
...eezybotarm baseplate
thingiverse
eezybotarm baseplate
https://www.youtube.com/watch?v=-yf_nm50kyu
thingiverse
free
Stand for EEZYbotARM by OzzY001
...tand for eezybotarm by ozzy001
thingiverse
simple stand for eezybotarm with arduino nano mountplaceplace and space for batteries
thingiverse
free
Bigger fingers for EEZYbotARM Mk2
...bigger fingers for eezybotarm mk2
thingiverse
bigger fingers for eezybotarm mk2, d=40mm. it is for festo meclab parts.
thingiverse
free
EEZYbotARM box by selimaydin61
...eezybotarm box by selimaydin61
thingiverse
aeezybotarm box
thingiverse
free
Big gripper for EEZYbotARM MK2 by youvication
...big gripper for eezybotarm mk2 by youvication
thingiverse
customized base for eezybotarm mk2
thingiverse
free
EEZYbotARM MK2 pens holders by tonypitzing
...eezybotarm mk2 pens holders by tonypitzing
thingiverse
eezybotarm mk2 pens holders
thingiverse
free
EEZYbotARM MK2 modified clamp by fox01vale87
...eezybotarm mk2 modified clamp by fox01vale87
thingiverse
this is a 15mm longer clamp version of eezybotarm mk2 by daghizmo
thingiverse
free
EEZYbotARM MK1 Control Panel by arnesake
...arm mk1 or even mk3 robot. caption of functions in portuguese.
link to eezybotarm mk1 - https://www.thingiverse.com/thing:1015238
thingiverse
free
Modified gripper for EEZYbotARM MK2
...tarm i redesigned the gripper for the eezybotarm mk2. for the correct size rescale the stl-models with 10% in your slicer-program
thingiverse
free
EEZYbotArm MK3 by daGHIZmo
...ng all its potential applications.
the making video: eezybotarm mk3 - the making
the preliminar tests video: eezybotarm mk3 tests
Modifications
turbosquid
$12
AKMS (AK47 modification)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
BusTransForm - Modif Bus Thailand
...d model bustransform - modif bus thailand for download as obj on turbosquid: 3d models for games, architecture, videos. (1383303)
3d_export
$25
mitsubishi evo 9 modification
...mitsubishi evo 9 modification
3dexport
evo 9 has been modified with a nice and elegant look.
3d_ocean
$25
Dart Vader (modificated helm)
...niforms, as well as anatomical model of the character itself. the model is divided into groups for further editing. primarily ...
turbosquid
$15
FN SCAR-H modification low-poly game ready
...fication low-poly game ready for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1386384)
3d_export
$5
sphere light
...sphere light
3dexport
the socket and light are modifables
3d_export
$5
Fabulous chest
...fabulous chest
3dexport
fabulous chest for your game or further modification
3d_export
free
cold coffee
...cold coffee 3dexport cold coffee can. any required modifications will be done at...
3d_ocean
$12
Cartoon Dump or Sand Truck
... wheels and piston already rig low poly modifier still in stack for modification unwrap uvw for material and colour modification
3d_ocean
$12
Cartoon Cement Mixer Truck
...r truck the wheels already rig low poly modifier still in stack for modification unwrap uvw for material and colour modification