Thingiverse
Edelrid Ronin Ice Axe protectors/caps by cho_O
by Thingiverse
Last crawled date: 4 years, 7 months ago
These are protectors for an Edelrid Ronin Ice Axe, for the pick/adze/spike.
The pick protector was reused from https://www.thingiverse.com/thing:3527097
For the Adze protector:
print with string holes aligned to the ground
no supports necessary
For the spike protector:
print with supports at 5% fill
for a really snug fit print at 98.5% scale, printing as is requires the use of an elastic band.
Even though they fit snug and won't fall off I've added elastic bands and stoppers to mine as seen in the pictures.
The pick protector was reused from https://www.thingiverse.com/thing:3527097
For the Adze protector:
print with string holes aligned to the ground
no supports necessary
For the spike protector:
print with supports at 5% fill
for a really snug fit print at 98.5% scale, printing as is requires the use of an elastic band.
Even though they fit snug and won't fall off I've added elastic bands and stoppers to mine as seen in the pictures.