ECX Temper RC Crawler Exoskeleton (FPV Protection) by SubBass100 3d model
3dmdb logo
Thingiverse
ECX Temper RC Crawler Exoskeleton (FPV Protection) by SubBass100

ECX Temper RC Crawler Exoskeleton (FPV Protection) by SubBass100

by Thingiverse
Last crawled date: 4 years, 3 months ago
I designed this open shell to protect my Wolfwhoop WT03 https://www.amazon.com/dp/B06XB2ZRBP FPV Camera as it has a soldered on antenna that sticks straight up. There are no bolt holes in this print so you can use a 1/16" drill through and use the stock M2 bolts that hold the normal roof on. (You may need to additional bolts if you desire 6 mount points instead of 4). I've printed this in PETG and tried to design it as strong as I could while keeping it light and non intrusive for signal propagation. I've rolled it a few times and it does take it like a champ!

Tags