Easy Print & Glue - Panzerjäger I by juergen54

Last crawled date: 3 years ago

When I startet printing vehicles I often was frustrated about the deficient print quality and the awful cleaning work.
So I decided to divide the object into several parts.
The focus is on print quality and avoiding support structures.
After printing, the parts have to be glued together.
Meanwhile I printed and built some models in this way.
I publish the print files for all users which like to have quick and good prints results.
I publish the files under the title "Easy Print & Glue"
Finally, let me thank the original designers of the models. They are important for our community. I only cut their models into several pieces ... nothing else.
=======================================
This time I worked on the Panzerjäger I.
I took this object, cutted it into several pieces and printed it with my FDM printer at a scale of 1/72.
All parts should printed with support. But there are only a few areas were support is really needed, mainly the gun and the barrel.
The support can be removed quick and easy.