Thingiverse
Easy 9g Aileron Servo Mount/covers by Sotm
by Thingiverse
Last crawled date: 4 years, 5 months ago
I got the inspiration from "Servo Protectors for ParkZone Radian Pro" by clough42, published Sep 29, 2014
However they were very large. I scaled them down then added a flat mounting surface for the 9g servo. You mount the servo where you want it using good servo mounting tape. Then secure the assembly into your wing with four #2 or 3mm screws. Makes changing or getting to the servo much easier and provides a fairing for the linkage. I have seen other 9g servo mounts here but they require more printing no fairing and are heavier.
Thanks again to clough42.
The file attached is for the right aileron. To print the left one just flip on the X-axis in your slicer program before printing. Cura does this nicely.
However they were very large. I scaled them down then added a flat mounting surface for the 9g servo. You mount the servo where you want it using good servo mounting tape. Then secure the assembly into your wing with four #2 or 3mm screws. Makes changing or getting to the servo much easier and provides a fairing for the linkage. I have seen other 9g servo mounts here but they require more printing no fairing and are heavier.
Thanks again to clough42.
The file attached is for the right aileron. To print the left one just flip on the X-axis in your slicer program before printing. Cura does this nicely.