Thingiverse
Earbud Case by twister920
by Thingiverse
Last crawled date: 4 years, 3 months ago
NOTE: This was designed for a school project. It has not yet been test printed, so there is no guarantee that it will work 100% properly as of right now.
This is a 3D printable object designed to allow you to store your earbuds in a safe, compact area where they will not be damaged.
In order to use this model, you place the earbud jack into the hole (~7mm diameter) in the bottom of the model and wrap the wire around the spool. The entire model is ~65mm (6.5cm) in diameter, and the height is 16mm. The distance from the spool in the middle to the outside circle is 13mm.
This is a 3D printable object designed to allow you to store your earbuds in a safe, compact area where they will not be damaged.
In order to use this model, you place the earbud jack into the hole (~7mm diameter) in the bottom of the model and wrap the wire around the spool. The entire model is ~65mm (6.5cm) in diameter, and the height is 16mm. The distance from the spool in the middle to the outside circle is 13mm.