Thingiverse
Eachine Wizard X220HV DJI Air Unit Retrofit (camera, mount)
by Thingiverse
Last crawled date: 5 years, 7 months ago
I couldn't find a DJI Air Unit design that I liked and I really liked the design Aremgi came up with for the Chameleon and adapted it to the Wizard X220HV. This design preserves the rear stack and can accommodate the factory lost model buzzer.
Print the bracket with the flat side (outside surface) down, and mirror it for the other side. The Air Unit holder sits between the rear and middle standoffs. Print the Air unit holder in PETG or PLA, and the antenna holder in TPU. Camera mount should be printed in TPU.
Based on concepts from these things:https://www.thingiverse.com/thing:4034182https://www.thingiverse.com/thing:3994291
Print the bracket with the flat side (outside surface) down, and mirror it for the other side. The Air Unit holder sits between the rear and middle standoffs. Print the Air unit holder in PETG or PLA, and the antenna holder in TPU. Camera mount should be printed in TPU.
Based on concepts from these things:https://www.thingiverse.com/thing:4034182https://www.thingiverse.com/thing:3994291