Cults
Eachine Aurora 100 FPV Racing Quad Upgrade Kit & Mods: YOUR FIRST DRONE
by Cults
Last crawled date: 6 years, 1 month ago
first, a little backstory...
I got my Aurora 100 brushless micro quad from Banggood in early 2017. Since then, I've grown to absolutely love it! Though others may disagree, I think the Aurora 100 is your best option as a first racing drone. First off, the Aurora is small. I've owned quite a few larger drones within the 180-500 class and they are outright dangerous! Not saying that the Aurora can't seriously hurt somebody or the walls of your house, but it's a LOT safer than the dangerous shredder of a 180 class. If you're new, you'll be crashing often and that means crashing safely. Furthermore, it can be tricky getting used to FPV and it would be a tragedy to accidentally turn somebody, or their dog, into a red slushie. But there's also strength and power to take into account. With the right upgrades (which I've listed in this post), you can turn your Aurora 100 into the ultimate flying machine. To give you an idea, I've been running the same props, motors, and frame for the last two months; and I'm not even a very good pilot!
The 3D printed modifications and upgrades are listed below:
-Hybrid PLA & TPU Frame With Integrated Motor Guards Though not as strong as carbon fiber, these "hybrid frames" are highly durable and definitely worth a try for low budget fliers. The Aurora 100 ships with a very weak stock frame (only 1.5mm thick carbon fiber) that will break easily. If you're interested in an infinite supply of cheap 3D printable frames that are STRONGER THAN THE STOCK FRAME and have integrated motor guards, you've come to the right place! The main thing I love about these frames is that they never fully break. When you slam into a street light at 40mph, the arm will flex and the PLA core will snap, but the arm will still stay fully attached, protecting your motor wires. I can't count the number of motors that got their wires ripped out because the arm of my carbon frame flew off! (I literally have a 1104 motor graveyard) Also, they have integrated motor guards which protect your motors from hard hits that can dislodge the magnets glued to your rotor (outside part of the motor). As for strength, one of my friends once said, "these frames are literally indestructible." Realistically, they can, and will, break, but it's definitely a great, inexpensive way to go. Note that this print does require a dual extruder printer. I also plan to start selling them in bulk on eBay sooner or later.
-Motor guards (for 1103/4/5/6) protect the not-so-durable stock Eachine motors. If you're low budget like me, you don't want to (or can't) invest the $60 in a set of nice, durable motors. I've found the stock motors more than adequate when properly protected. Though these motor guards may add a significant amount of weight to your build, they are almost essential to using the stock motors. Also, even with all of these mods, my Aurora totally rips! Note that there are clockwise (CW) and counterclockwise (CCW) motor guards. For more info on the motor guards, see my other post.
-ATX03 VTX and camera mount allows you to install an upgraded ATX03 video transmitter! If you ever decide to race your Aurora at any events, you'll need a VTX capable of more than the puny 25mw the stock transmitter outputs (trust me, I tried). Even if you're on a different channel, the 200mw VTXs of the other larger quads will give you signal hell. The Eachine ATX03 video transmitter (VTX) allows you to select not only the channel, but also select the power at either 25mw, 50mw, or 200mw! Moreover, the ATX03 has an IPEX port, allowing you to plug in a durable whip antenna. The common cloverleaf antenna that most micro FPV rigs come with is very fragile and probably won't survive much, but a whip antenna will last forever.
Okay, now let's talk about the 3D printed parts. It consists simply of two side panels which slide over your two front red aluminum standoffs. The ATX03 then slides in! These panels also provide great protection against annoying grass bits and other stuff that your props may fling into your flight controller (FC) stack.
-Camera Locks The camera locks are definitely some of the smaller mods that I've installed but do serve a useful purpose. Because the ATX03 is just a VTX, you'll need to install an external camera. With the stock VTX and camera rig, the whole thing was pinched between the carbon fiber and aluminum camera mount. This made sure that your camera didn't slide around during flight. When using an external camera, it can slide around in its place especially when trying to put on a lens cap! These two little pieces slide into the rectangular slots on the side of the aluminum camera mount and lock your camera in place so it doesn't slide out when you install your lens cap! If you're suffering from vibration issues, print them in TPU to help reduce vibrations transferred to your camera!
-Antenna Guard and Roll Bar If you're one of those people who love cloverleaf antennas and just can't bear to give them up to a dipole, you're in luck! These antenna guards are large enough to fit most small cloverleaf antennas that don't have a long coaxial cable (the wire connecting the SMA connector to the antenna). Even if you're not running a cloverleaf, whip antennas can break! Better be safe than sorry!
These antenna guards also work as great roll bars. The top plate of most quads is known to be that part that will rarely, or never, break. This is sort of true with the Aurora. When you're flying fast, your quad will be tilted very far forward, meaning if you crash, you're more likely damage the top of your quad than when flying at slower speeds. Also, if you ever fly face first into a tree, there's a chance that your Aurora may fall upside down onto the pavement. By attaching these antenna guards, you allow them to break instead of your top plate. I've included both .STL and .SVG files for the antenna guards as some of you may want to try to CNC them out of carbon fiber. I suggest printing them in either polycarbonate, if your printer can handle it, or TPU.
-The Original Aurora Base Plate If you own a 3D printer, CNC, or laser cutter, I've included .STL and .SVG files for my rendition of the original Aurora baseplate! It's not very strong in PLA (the hybrid frame is much more durable), but it's nearly indestructible when CNC'd in 2.5mm carbon fiber.
My current rig (August 2017): This is what I'm currently running and have been running for the last few months. I've tinkered with it quite a bit and think that I've hit the "sweet spot."
-Stock Minicube Flight Controller, ESC (10A), and Receiver Stack 20mmx20mm
-Stock Eachine 7500kv 1104 Motors
-Stock Eachine 450mah 2s 80c LiPo
-Upgraded 2.5mm Carbon Fiber Base Plate
-1000tvl 1.2g 120 Degree CMOS Camera
-Eachine ATX03 Video and Audio Transmitter (with whip antenna)
-Gemfan 2035 Polycarbonate "Indestructible" Propellers (these live up to their name) Note that I run these only about 1/2 the time I fly. After extreme crashes (often), I replace all four props with the ones listed below. I'm still deciding which ones are best. These are great because they are well balanced but bend easily. You'll just need to bend them back after every crash.
-DYS 2030 Props (these are the ones I'm running in the photos above) I like these props because they're a lot stiffer (and cheaper) than the GFs (Gem Fans), but they're weaker. After a solid crash into a streetlight, you can expect to break at least a blade or two. Sadly, about 1/2 of these props arrive very poorly balanced to the point where it's nearly unflyable due to the amount of noise this creates on the video feed (due to vibrations). Make sure to balance them! Lastly, I seem to get a little more thrust from these props and they're also are slightly more efficient (according to the thrust charts).
Future Plans: Stay tuned for these exciting experimental upgrades.
-Upgrading permanently to 3S (soldering on an XT30 plug & upgrading ESC and/or motors)
-Trying higher discharge batteries
-Trying 5 blade 2035 props
-Trying 1105 motors
-Trying 1106 motors
Have fun and happy flying!
Updates:
-8/29/17: Updated camera locks to reduce vibrations.
-9/17/2017: Added V2 motor guard. .5mm thicker bottom, extra strength chamfer, and added a hole in the center to access the C/E clip.
-9/17/2017: Added V3 motor guard which simply has a chamfer on the inner edge to prevent the guard from getting caught in smaller motor bells in the event that they break.
-10/14/17: Added V3 TPU motor guard which has an increased wall thickness and smaller diameter screw holes to prevent M2 bolts with small heads from sinking into the guard and causing it to fall off. I really like the TPU motor guards and highly suggest that you give them a try.
-10/14/17: Added V1 NinjaFlex TPU 1106 edition motor guards. These are specifically designed to be printed in NinjaFlex TPU and be used for 1106 motors. Note that the'll only work with 1106 motors due to the tall 6mm stator height. NinjaFlex is the most flexible TPU currently on the market, making it ideal for soft mounting your motors. By pairing these NinjaFlex motor guards with soft mounting pads, you'll get silky smooth soft-mounted flight.
-10/14/17: Added 11XX soft mounting motor pads. These simply get installed under your motor and help ensure that motor vibrations don't get transferred to the rest of your quad. With my limited testing, these give you silky smooth flight. For best results, print in NinjaFlex TPU and pair with TPU motor guards.
eBay Link
Don't own a 3D printer? No problem! Purchase the Aurora 100 upgrade kit on eBay.
I got my Aurora 100 brushless micro quad from Banggood in early 2017. Since then, I've grown to absolutely love it! Though others may disagree, I think the Aurora 100 is your best option as a first racing drone. First off, the Aurora is small. I've owned quite a few larger drones within the 180-500 class and they are outright dangerous! Not saying that the Aurora can't seriously hurt somebody or the walls of your house, but it's a LOT safer than the dangerous shredder of a 180 class. If you're new, you'll be crashing often and that means crashing safely. Furthermore, it can be tricky getting used to FPV and it would be a tragedy to accidentally turn somebody, or their dog, into a red slushie. But there's also strength and power to take into account. With the right upgrades (which I've listed in this post), you can turn your Aurora 100 into the ultimate flying machine. To give you an idea, I've been running the same props, motors, and frame for the last two months; and I'm not even a very good pilot!
The 3D printed modifications and upgrades are listed below:
-Hybrid PLA & TPU Frame With Integrated Motor Guards Though not as strong as carbon fiber, these "hybrid frames" are highly durable and definitely worth a try for low budget fliers. The Aurora 100 ships with a very weak stock frame (only 1.5mm thick carbon fiber) that will break easily. If you're interested in an infinite supply of cheap 3D printable frames that are STRONGER THAN THE STOCK FRAME and have integrated motor guards, you've come to the right place! The main thing I love about these frames is that they never fully break. When you slam into a street light at 40mph, the arm will flex and the PLA core will snap, but the arm will still stay fully attached, protecting your motor wires. I can't count the number of motors that got their wires ripped out because the arm of my carbon frame flew off! (I literally have a 1104 motor graveyard) Also, they have integrated motor guards which protect your motors from hard hits that can dislodge the magnets glued to your rotor (outside part of the motor). As for strength, one of my friends once said, "these frames are literally indestructible." Realistically, they can, and will, break, but it's definitely a great, inexpensive way to go. Note that this print does require a dual extruder printer. I also plan to start selling them in bulk on eBay sooner or later.
-Motor guards (for 1103/4/5/6) protect the not-so-durable stock Eachine motors. If you're low budget like me, you don't want to (or can't) invest the $60 in a set of nice, durable motors. I've found the stock motors more than adequate when properly protected. Though these motor guards may add a significant amount of weight to your build, they are almost essential to using the stock motors. Also, even with all of these mods, my Aurora totally rips! Note that there are clockwise (CW) and counterclockwise (CCW) motor guards. For more info on the motor guards, see my other post.
-ATX03 VTX and camera mount allows you to install an upgraded ATX03 video transmitter! If you ever decide to race your Aurora at any events, you'll need a VTX capable of more than the puny 25mw the stock transmitter outputs (trust me, I tried). Even if you're on a different channel, the 200mw VTXs of the other larger quads will give you signal hell. The Eachine ATX03 video transmitter (VTX) allows you to select not only the channel, but also select the power at either 25mw, 50mw, or 200mw! Moreover, the ATX03 has an IPEX port, allowing you to plug in a durable whip antenna. The common cloverleaf antenna that most micro FPV rigs come with is very fragile and probably won't survive much, but a whip antenna will last forever.
Okay, now let's talk about the 3D printed parts. It consists simply of two side panels which slide over your two front red aluminum standoffs. The ATX03 then slides in! These panels also provide great protection against annoying grass bits and other stuff that your props may fling into your flight controller (FC) stack.
-Camera Locks The camera locks are definitely some of the smaller mods that I've installed but do serve a useful purpose. Because the ATX03 is just a VTX, you'll need to install an external camera. With the stock VTX and camera rig, the whole thing was pinched between the carbon fiber and aluminum camera mount. This made sure that your camera didn't slide around during flight. When using an external camera, it can slide around in its place especially when trying to put on a lens cap! These two little pieces slide into the rectangular slots on the side of the aluminum camera mount and lock your camera in place so it doesn't slide out when you install your lens cap! If you're suffering from vibration issues, print them in TPU to help reduce vibrations transferred to your camera!
-Antenna Guard and Roll Bar If you're one of those people who love cloverleaf antennas and just can't bear to give them up to a dipole, you're in luck! These antenna guards are large enough to fit most small cloverleaf antennas that don't have a long coaxial cable (the wire connecting the SMA connector to the antenna). Even if you're not running a cloverleaf, whip antennas can break! Better be safe than sorry!
These antenna guards also work as great roll bars. The top plate of most quads is known to be that part that will rarely, or never, break. This is sort of true with the Aurora. When you're flying fast, your quad will be tilted very far forward, meaning if you crash, you're more likely damage the top of your quad than when flying at slower speeds. Also, if you ever fly face first into a tree, there's a chance that your Aurora may fall upside down onto the pavement. By attaching these antenna guards, you allow them to break instead of your top plate. I've included both .STL and .SVG files for the antenna guards as some of you may want to try to CNC them out of carbon fiber. I suggest printing them in either polycarbonate, if your printer can handle it, or TPU.
-The Original Aurora Base Plate If you own a 3D printer, CNC, or laser cutter, I've included .STL and .SVG files for my rendition of the original Aurora baseplate! It's not very strong in PLA (the hybrid frame is much more durable), but it's nearly indestructible when CNC'd in 2.5mm carbon fiber.
My current rig (August 2017): This is what I'm currently running and have been running for the last few months. I've tinkered with it quite a bit and think that I've hit the "sweet spot."
-Stock Minicube Flight Controller, ESC (10A), and Receiver Stack 20mmx20mm
-Stock Eachine 7500kv 1104 Motors
-Stock Eachine 450mah 2s 80c LiPo
-Upgraded 2.5mm Carbon Fiber Base Plate
-1000tvl 1.2g 120 Degree CMOS Camera
-Eachine ATX03 Video and Audio Transmitter (with whip antenna)
-Gemfan 2035 Polycarbonate "Indestructible" Propellers (these live up to their name) Note that I run these only about 1/2 the time I fly. After extreme crashes (often), I replace all four props with the ones listed below. I'm still deciding which ones are best. These are great because they are well balanced but bend easily. You'll just need to bend them back after every crash.
-DYS 2030 Props (these are the ones I'm running in the photos above) I like these props because they're a lot stiffer (and cheaper) than the GFs (Gem Fans), but they're weaker. After a solid crash into a streetlight, you can expect to break at least a blade or two. Sadly, about 1/2 of these props arrive very poorly balanced to the point where it's nearly unflyable due to the amount of noise this creates on the video feed (due to vibrations). Make sure to balance them! Lastly, I seem to get a little more thrust from these props and they're also are slightly more efficient (according to the thrust charts).
Future Plans: Stay tuned for these exciting experimental upgrades.
-Upgrading permanently to 3S (soldering on an XT30 plug & upgrading ESC and/or motors)
-Trying higher discharge batteries
-Trying 5 blade 2035 props
-Trying 1105 motors
-Trying 1106 motors
Have fun and happy flying!
Updates:
-8/29/17: Updated camera locks to reduce vibrations.
-9/17/2017: Added V2 motor guard. .5mm thicker bottom, extra strength chamfer, and added a hole in the center to access the C/E clip.
-9/17/2017: Added V3 motor guard which simply has a chamfer on the inner edge to prevent the guard from getting caught in smaller motor bells in the event that they break.
-10/14/17: Added V3 TPU motor guard which has an increased wall thickness and smaller diameter screw holes to prevent M2 bolts with small heads from sinking into the guard and causing it to fall off. I really like the TPU motor guards and highly suggest that you give them a try.
-10/14/17: Added V1 NinjaFlex TPU 1106 edition motor guards. These are specifically designed to be printed in NinjaFlex TPU and be used for 1106 motors. Note that the'll only work with 1106 motors due to the tall 6mm stator height. NinjaFlex is the most flexible TPU currently on the market, making it ideal for soft mounting your motors. By pairing these NinjaFlex motor guards with soft mounting pads, you'll get silky smooth soft-mounted flight.
-10/14/17: Added 11XX soft mounting motor pads. These simply get installed under your motor and help ensure that motor vibrations don't get transferred to the rest of your quad. With my limited testing, these give you silky smooth flight. For best results, print in NinjaFlex TPU and pair with TPU motor guards.
eBay Link
Don't own a 3D printer? No problem! Purchase the Aurora 100 upgrade kit on eBay.
Similar models
cults
free
11XX Motor Guards & Soft Mounts
...alized ninjaflex tpu motor guards for 1102, 1103, 1104, and 1105 motors. (earlier update included the tpu motor guards for 1106.
cults
free
Awesome 200 Motor Guards & 22XX TPU Soft Mount Pads
...the guards allow it to fit seamlessly onto the similar shape of each carbon arm of the awesome 200....
cults
free
BIF RC Lantian X3 Upgrade Kit
...should fit the atx03 (has audio), vtx03, and other similar vtxs. it's simply a tpu slot that slides onto...
cults
free
11XX 22XX 14XX 13XX TPU Soft Mount Pads Quadcopter Vibration Dampener Every Size
...you!
for best results, print these in super flexible ninjaflex tpu.
don't own a 3d printer? no problem! buy these on ebay.
cults
free
FPV TPU Protection Eachine TX01 / TX02 / TX03
... several versions for the tx01 and 02 and for the tx03 which is larger
it takes just two screws m1.6 10mm to secure the two parts
cults
free
Ultra Durable Pagoda Antenna Protector
... of the pagoda antenna as the others have different plate spacing.
don't own a 3d printer? no problem! purchase it on ebay.
cults
free
DARKVADOR ANTENNE GUARD
...darkvador antenne guard
cults
qx95 dark vador eachine drone fpv
antenna protection for qx95
cults
free
PrintrBot NinjaFlex Upgrade
...printrbot ninjaflex upgrade
cults
printrbot ninjaflex upgrade
printrbot ninjaflex upgrade
cults
free
Indestructible Tiny Whoop TPU 90mm 2S
...witchable-aio-5_8g-72ch-vtx-600tvl-13-cmos-fpv-camera-p-1104884.html?rmmds=myorder?p=ld020411878172015024
screws 2 x m 1.6 10 mm
cults
free
Polycarbonate protection Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mw
...4-cmos-fpv-camera-p-1088368.html?rmmds=myorder?p=ld020411878172015024
it takes just two screws m1.6 10mm to secure the two parts
Aurora
cults
free
Coil holder
...holder support coil support no support provided with my aurora z605, so here are mine. always modeled under...
cults
free
11XX Motor Guards & Soft Mounts
...11xx motor guards & soft mounts cults 1104 1104_brushless_motor aurora 100 brushless brushless motor eachine motor protector after breaking...
Banana
cults
$2
Support banana
...support banana
cults
support banana
support banana
cults
$7
BANANA
... animals food cutter fondant
banana pla
cooker cutter
model: banana 1
with end of slim edges to cut and do not apply the mass.
cults
free
High Resolution Scan of a Banana.
...a in a high resolution scan, to be shared with all of humanity.
use it wisely. don't let its existence and death be in vain.
cults
$3
Minions
...minions cults toy banana!! ...
cults
free
Pikachu Key Chain
...printed with designex3d odyssey x material used is designex3d banana yellow pla share with us the prints that you...
cults
free
Chinese new year - rooster 2017
...printed with designex3d odyssey x material used is designex3d banana yellow pla share with us the prints that you...
cults
free
Mr Patato STRATOMAKER
...stratomaker cap, bezel / smile, hair t, la mustache, banana stratomaker, body with writing, v arm of the...
cults
free
Rotten Garlic Stink Grenade
...make sure to check out our other videos at banana science:...
cults
free
Trombash
...clearing land for crops or for gardening of the banana groves. blades have one or several holes, with copper...
cults
free
Watt the Half Truffle
...flank sandwich proceed to [1c], if he chooses the banana split burger proceed to [1b], if he decides to...
Eachine
cults
$1
protection camera Eachine qx95
...protection camera eachine qx95
cults
une cam. hs pas deux
cults
$4
Eachine BAT QX105 drone protection
...n total. what not to penalize the time of flight.
tested and approved (more effective than the protections proposed by eachine)
cults
free
FPV TPU Protection Eachine TX01 / TX02 / TX03
... several versions for the tx01 and 02 and for the tx03 which is larger
it takes just two screws m1.6 10mm to secure the two parts
cults
free
eachine 25mv mini camera stand
... easily also to put it on other model. so here is a shell enclosing the camera and battery, with the bonus of an objective cache.
cults
free
Eachine DVR + lipo clip
...yking.com/en_us/turnigy-nano-tech-1500mah-2s1p-20-40c-lipo-receiver-pack.html?___store=en_us
https://youtu.be/fv0qdgfp5bc
cults
free
Polycarbonate protection Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mw
...4-cmos-fpv-camera-p-1088368.html?rmmds=myorder?p=ld020411878172015024
it takes just two screws m1.6 10mm to secure the two parts
cults
free
DARKVADOR ANTENNE GUARD
...darkvador antenne guard cults qx95 dark vador eachine drone fpv antenna protection for...
cults
$4
Box to store an E010, E011, TinyWhoop + 4 LiPo battery slots
...e010, e011, tinywhoop + 4 lipo battery slots cults eachine blade tinywhoop e010 e011 quadcopter quadricopter box arrangement lipo...
cults
free
Indestructible Tiny Whoop TPU 90mm 2S
.../ 200mw: http://www.banggood.com/eachine-tx02-super-mini-aio-5_8g-40ch-200mw-vtx-600tvl-14-cmos-fpv-camera-p-1088368.html?rmmds=myorder?p=ld020411878172015024 camera eachine tx03 25mw/50mw / 200mw: http://www.banggood.com/eachinetx03-super-mini-025mw50mw200mw-switchable-aio-5_8g-72ch-vtx-600tvl-13-cmos-fpv-camera-p-1104884.html?rmmds=myorder?p=ld020411878172015024 screws 2 x m 1.6 10...
cults
free
Tiny Whoop 68mm polycarbonate cross fashion
...camera 25mw: http://www.banggood.com/eachine-tx01-super-mini-aio-5_8g-40ch-25mw-vtx-600tvl-14-cmos -fpv-transmitter-p-1088374.html? p = ld020411878172015024 camera 200mw: http://www.banggood.com/eachinetx02-super-mini-aio-5_8g-40ch-200mw-vtx-600tvl-14-cmos-fpv-camera-p-1088368.html? rmmds = myorder? p = ld020411878172015024 lipo 1s nanotech...
Brushless
cults
free
Micro Quad fpv Racer 100mm Brushless 1S 0703 20.000kv
...= ld020411878172015024
https://www.youtube.com/watch?v=bvm__lzwcds&feature=youtu.be
https://www.facebook.com/microdure/
cults
free
Mini Quad Racer 100mm Brushless GemFan 0806 6200kv 2S
...-bn-4-leaf-3mm-square-hole-cw-ccw-fpv-racing-propeller-p-1137626.html?p=ld020411878172015024
https://www.facebook.com/microdure/
cults
free
Mini Quad Acro 120mm Micro Pico F3 Brushless 1103 2S 10.000kv
...r-prop-20pcs-for-720-8520-coreless-motor-diy-micro-quadcopter-p-1092166.html?p=ld020411878172015024
connection screws: m1.6x12mm
cults
free
Mini Quadcopter fpv Racer 120mm micro FC lumenier racing F4 Brushless 1103 10.000kv 2S
...r in picture 8.
the vtx unify heats very hard, i used a velcro to limit the heat and avoid the flipping of double faces classics
cults
free
Whoop Drone Cross 4S Night Flight Acro
...it is equipped with : micro f4 20x20mm motors brushless 1707 - 3900kv propellers lumenier 5040x4 cut to 70mm....
cults
free
3DRC 2WD Buggy 1:16 Car
...of m3 bolts (listed in assembly manual) 20mm diameter brushless inrunner motor. brushless esc 13g metal gear servo 2-3s...
cults
$2
DRONE FPV 280
...or pla carbon use 10 m3x16 2204 or 1806 brushless motor esc in the body 5 or 6 "propeller...
cults
free
Woop 105mm Indestructible TPU 1103 7800kv 3S
...ppm frsky: http://www.banggood.com/fr/fd800-tiny-frsky-8ch-ppmsbus-receiver-compatible-frsky-accst-x9dplusdjtdftdht-for-qx95-qx90-p-1108071.html?p=ld020411878172015024 esc4x12amp: http://www.banggood.com/fr/20x20mm-racerstar-mini-rs12ax4-12a-blheli_s-bb2-2-4s-4-in-1-brushless-esc-d-shot-ready-p-1132683.html?p=ld020411878172015024 brushless 1103 7800kv 3s: http://www.banggood.com/fr/kingkong-1103-7800kv-1-3s-brushlessmotor-for-50-80-100-rc-mini-multirotor-p-1122783.html??p=ld020411878172015024 propeller 4 blades : http://www.banggood.com/fr/10-pairs-racerstar-2035-50mm-4-blade-abs-propeller-1_5mm-mounting-hole-for-fpv-racing-frame-p-1127196.html?p=ld020411878172015024 propeller 5 blades max...
cults
free
Cooling fan spur gear - Option part for MKUltra 1/10 4WD Buggy
...1/10 4wd buggy cults rc buggy 4wd racing mkultra brushless shorty model car a spur gear with integrated cooling...
cults
free
Air Raid Siren
...siren cults an air raid siren powered by a brushless motor (rctimer 5010-360kv). it has a total weight of...
Onshape
cults
free
Nerf Dart Target
...stress at the office. these targets were designed in onshape (free, web-based computer-aided design software) check out this follow-along...
cults
free
Citrus Coasters
...citrus coasters cults citrus slice coasters. modeled in onshape printed on a type a series 1 pro with...
cults
free
Bag Strap Clip 25mm
...it's designed fo dakine bag with strap width 25mm. onshape link:...
cults
free
Drachenberg USB Drive
...drachenberg usb drive cults flash_drive onshape sandisk sword usb usb_stick universal serial bus? more like...
cults
free
High Heel Shoe Model
...heel shoe model cults i created this shoe in onshape it is too small to where it. but it...
cults
free
Mosaic Money Clip
...mosaic money clip cults designed in onshape and printed in 4 colors on a series 1...
cults
free
Phone Tripod Mount (Universal)
...thing is made in onshape, and it's fully customizable. onshape link: https://goo.gl/0ukbnm i was attempting to make this thing...
cults
free
Hairy Gyro with 3 moving rings
...idea of a hairy gyro. i designed this in onshape and printed it in 4 1/2 hours. have fun...
cults
free
ABB lockout handle
...a cost of $1 depending on material. designed in onshape ...
cults
free
hairy fidget spinner
...it is. you need normal inline bearings. made with onshape and the top with tinkercad. have a look at...
Racer
cults
free
OL’ RACER
...ol’ racer
cults
small 3d printed racer car that you can take apart and assemble – let the races begin!!
cults
free
Mini Racer
...ted our own.
design your own with the [mini racer openscad library](https://github.com/vinceallenvince/3dp/tree/master/racecar).
cults
free
Wind-Up Racer
...han one and race against your friends!
originally designed by 3d systems: https://www.3dsystems.com/shop/store/3diy/windupracers
cults
free
Wind-Up Racer Mini
...han one and race against your friends!
originally designed by 3d systems: https://www.3dsystems.com/shop/store/3diy/windupracers
cults
free
Racer Plier/Wrench
...220x motor and the wrench fits for m5-nut.
it's pretty easy to print. i've added some anti slip pad inside the pliers...
cults
$4
Gee Bee R2 Golden Age Air Racer
...ica of the real one. it would make a great show of model.
updated 12 05 17: all the .stl files have been rotated for easy print.
cults
free
AIR RACER -3D Grand Prix-
... constructor team.
we'll organize a 3d-grand prix ;)
just let me know & get your helmet's on...
the bon garçon.
cults
free
Moto Cafe Racer scalemodel
...the process design.
. link:
https://cults3d.com/us/users/guaro3d/creaci%c3%b3n
greetings, happy printing
cults
free
Micro Quad fpv Racer 100mm Brushless 1S 0703 20.000kv
...= ld020411878172015024
https://www.youtube.com/watch?v=bvm__lzwcds&feature=youtu.be
https://www.facebook.com/microdure/
cults
free
Crazy Cool Turbine LED holder for Blackout Mini H FPV Racer
...etchup.
print it as in the pictures with supports.
you can buy the led's here.
https://www.youtube.com/watch?v=5k6a6zk6c44
Quad
cults
free
Drone-bot quad
...drone-bot quad
cults
robot bot futuristic future quad fly drone art toy toy
drone-bot quad serie z-22
cults
free
Mount on FPV250 quad for Naza
...mount on fpv250 quad for naza
cults
mount on fpv250 quad for naza
cults
free
Quad Cane Foot Replacement
...quad cane foot replacement
cults
quad cane foot replacement part.
cults
free
OpenRC 220 FPV Mini Quad
...openrc 220 fpv mini quad
cults
openrc 220 fpv mini quad
openrc 220 fpv mini quad
cults
free
Bepo - Universal Phone Quad-Pod
...bepo - universal phone quad-pod
cults
bepo - universal phone quad-pod
bepo - universal phone quad-pod
cults
free
GoPro mount for FPV250L quad copter
...gopro mount for fpv250l quad copter
cults
gopro mount for fpv250l quad copter
gopro mount for fpv250l quad copter
cults
free
Armattan F1-acro quads series buzzer
...armattan f1-acro quads series buzzer
cults
buzzer builder armattan f1-addicts quads series ninjaflex semiflex
cults
free
360 Camera Mount for OpenRC Mini Quad
... action camera onto the openrc 220 fpv mini quad (link below)
more info on the xiaomi 360 camera here here: http://bit.ly/2u8akzh
cults
free
Quad Hex Nut Cat Spinner
... version
compact
easy to print
uses 4x 5/16" hex nuts
uses 1x 608zz (22x7) bearing
my prints of this thing spin really well
cults
free
360 Camera Mount for OpenRC Mini Quad
... action camera onto the openrc 220 fpv mini quad (link below)
more info on the xiaomi 360 camera here here: http://bit.ly/2u8akzh
Upgrade
cults
free
PrintrBot NinjaFlex Upgrade
...printrbot ninjaflex upgrade
cults
printrbot ninjaflex upgrade
printrbot ninjaflex upgrade
cults
free
Christmas Tree upgrade.
...christmas tree upgrade.
cults
christmas tree upgrade.
christmas tree upgrade.
cults
free
Google Cardboard kit upgrade
...google cardboard kit upgrade
cults
google cardboard kit upgrade
google cardboard kit upgrade
cults
free
Google Cardboard kit upgrade 1
...google cardboard kit upgrade 1
cults
google cardboard kit upgrade 1
google cardboard kit upgrade 1
cults
free
UPGRADE YOUR HAND SPINNER
...r reviews another autre_hand_spinner upgrade_hand_spinner beyblade
upgrade for classic hand spinner
https://youtu.be/_eytphyqxmi
cults
free
UPGRADE UM2
...giverse.com/thing:2593527
scaffold and poly plus pla with the dual-balance prototype:
https://www.thingiverse.com/thing:2608925
cults
free
Top upgrade Bowden Anet A6 Right
...ps://cults3d.com/en/modelo-3d/variado/top-upgrade-filament-holder-anet-a6-left
bearings / bearings:
http://amzn.eu/d2huwx9
cults
free
Star Wars Snowspeeder Upgrade
... barrels with ones that fire missiles.
more info at http://dragonmountaindesign.com/2015/11/16/star-wars-snowspeeder-upgraded/
cults
free
How to upgrade your Asus Xtion into a beautiful 3D scanner
...anner
cults
how to upgrade your asus xtion into a beautiful 3d scanner
how to upgrade your asus xtion into a beautiful 3d scanner
cults
free
Top upgrade Filament Holder Anet A6 Left
...-right
filament spool holder:
https://www.thingiverse.com/thing:2070272
bearings / bearings:
http://amzn.eu/d2huwx9
Mods
cults
free
light cage mods
...light cage mods
cults
light cage mods
light cage mods
cults
free
3A batteries mod for SMARS
...gned to fit this motor driver: https://goo.gl/v8adzu
you will need some prong fastener (like these ones https://goo.gl/kckwi9)
cults
free
Mobius Camera - MoPro Mod
...//www.ebay.com/itm/mobius-actioncam-1080p-2-5-cm-26-pin-lens-extension-cable-/291415457724?hash=item43d9b6ffbc:g:l4oaaosw7abveklx
cults
$5
Cannon Oto Melara Mod 56 105 mm
...cannon oto melara mod 56 105 mm
cults
oto melara mod 56 105 mm files in stl
only for 3d printer
cannon and ammunition
cults
$12
Handguard for 98L Tippmann CRONUS MOD
...r most tippmann a5 type barrels. it fits my tippmann cronus conversion kit. both the body and the handguard feature keymod rails.
cults
free
SMARS Three wheeled mod
...tronics of the original smars (except the n20 motors)
join us on facebook for updates and software help: https://goo.gl/qla9ag
cults
free
OpenRC Tractor motor mod
... updates and get more details at (http://www.makitpro.com)
download original tractor from: https://cults3d.com/en/users/makitpro
cults
free
SMARS QUAD MOD
...ell
-1x frame_e
-1x servo driver cover
-1x holding board spark
-2x foot
-2x foot_m
-4x servo case
-4x servo case_m
-4x servo arm
cults
free
Snap Together Farm Tractor - minor mods
... support material in the cabin)
remixed from:
https://www.thingiverse.com/thing:962058
https://www.thingiverse.com/thing:2037712
cults
free
Anet A6 J-Hotend mod
...e hotend wil come to sit. you can break this cylinder out after the print is ready, this cylinder is for support while printing.
Science
cults
free
Funnel Flow Science / Math Project
...funnel flow science / math project
cults
funnel flow science / math project
funnel flow science / math project
cults
$3
Gyrocopter science fiction
...mprimé avec une imprimante 3d de chez dagoma pour compléter ma gamme de motards de l'espace, il donne de très bons résultats.
cults
free
Microscope
...microscope cults science it is the reproduction of a scale...
cults
free
MRO
...mars and six months of aerobraking to reach its science orbit, mars reconnaissance orbiter began seeking out the history...
cults
free
Iphone 4 Case
...iphone 4 case cults shell iphone science shanimen yellow a pretty iphone 5...
cults
free
Iphone 5 blue case
...iphone 5 blue case cults shell iphone science shanimen blue a pretty iphone 5...
cults
free
Green Iphone 5 Case
...green iphone 5 case cults shell iphone science shanimen green a pretty iphone 5...
cults
free
Iphone 5 red case
...iphone 5 red case cults shell iphone science shanimen red a pretty iphone 5...
cults
free
Iphone 5 case pink
...iphone 5 case pink cults shell iphone science shanimen pink a pretty iphone 5...
cults
free
Iphone 5 orange case
...iphone 5 orange case cults shell iphone science shanimen orange a pretty iphone 5...
Quadcopter
cults
$10
quadcopter keychain
...uadcopter quad drone quadricottero
quadcopter keychain with spinning props
if prolellers is too tight scale quad2.stl at 102-105%
cults
free
OpenRC Quadcopter (Beta)
...openrc quadcopter (beta)
cults
openrc quadcopter (beta)
openrc quadcopter (beta)
cults
$25
Drone Quadcopter
...drone quadcopter
cults
quadcopter drone
quacopter avec des élices 10" capable de porter 1kg
100% imprimé 3d
cults
free
Quadcopter T-1
...table quadcopter. we take you to the sky. you take it from there. hack, experiment, imagine new ways to launch your geeky vision.
cults
free
Easy to print Inductrix Quadcopter Frame
...ad frame. heavier than original frame, but pretty robust as well.
normal frame file for 0.5 nozzle, thin file is for 0.4 nozzle.
cults
free
JJRC H11D quadcopter legs
... from your printer to your drone with ease, snap right into place.
print with 0% infill and use supports ( they clean off easy)
cults
free
Quadcopter 915F
...ini in a world of jeeps. cutaway chevrons, sleek propellers and elegant proportions lift this high-concept quad above the rabble.
cults
free
Skeleton X-14 Quadcopter
...en lighter build—and the chance to show off all its inner workings. this 3diy project is available as a free download to 3d print
cults
free
140 Sized Quadcopter - By 3DEX
... control board.
please check out www.3dexfilament.co.uk for more information about us and how we can help you with 3d printing.
cults
$10
Folding Quadcopter 450 Frame
...
assembly diagram in the "copter assembly.stl" file.
the number of items for printing is indicated in stl name.
enjoy!
Fpv
cults
free
FPV kit for Turnigy 9XR
...fpv kit for turnigy 9xr
cults
fpv kit for turnigy 9xr
fpv kit for turnigy 9xr
cults
free
FPV Antenna replacement Cap
...fpv antenna replacement cap
cults
fpv antenna replacement cap
fpv antenna replacement cap
cults
free
FPV Race Gates
...oiled drone uav dji drone_racing fatshark fpv_racing gopro qav250 quadcopter race_gates
make some cheap and easy fpv race gates.
cults
free
OpenRC 220 FPV Mini Quad
...openrc 220 fpv mini quad
cults
openrc 220 fpv mini quad
openrc 220 fpv mini quad
cults
free
GoPro Session and FatShark FPV Mount
...gopro session and fatshark fpv mount
cults
gopro session and fatshark fpv mount
gopro session and fatshark fpv mount
cults
$2
DRONE FPV 280
...e 10 m3x16
2204 or 1806 brushless motor
esc in the body
5 or 6 "propeller
700 or 800 tvl camera
cc3d silentbloc or other ...
cults
free
10 Degree FPV Camera Mount
...unt
cults
fpv hobby quadcopter
this fits the hobby king quanum complete fpv goggle and camera kit,
also fits 30x30x10mm cameras
cults
$1
Base for FPV Gate
...al pieces will fit perfect with those square pins. forming a nice long base for fpv racing gate for micro fpv racing quadcopters.
cults
free
20 Degree FPV Camera Mount
...ch_video_tx_rx_cp_antennas_and_camera_pnf_.html)
also fits 30x30x10mm fpv cameras
[turn design on side for best print results]
cults
free
Pan, tilt and roll camera pod for FPV.
...pan, tilt and roll camera pod for fpv.
cults
pan tilt and roll camera pod for fpv.
pan, tilt and roll camera pod for fpv.
Racing
cults
free
Car race in progress
...car race in progress
cults
car running race race
car dimensions for school project current race.
cults
free
Rear wheel race in progress
...race running race car model for school project motor racing in progress. with the right...
cults
free
FPV Race Gates
...cults fpv race spoiled drone uav dji drone_racing fatshark fpv_racing gopro qav250 quadcopter race_gates make some cheap and easy...
cults
free
tutute racing circuit
...cuit
cults
tutute bolide circuit car child toy
small part circuit tutute racing car.
i will do another part if it interests me.
cults
free
Tiny Whoop Race Gate $0.50
...ce gate $0.50
cults
using 3/16" dowel from the home depot you can make a tiny whoop race gate to the size of your choosing!
cults
free
Q3D 220 FPV Racing Frame
...perior material for racing but this is a fun build that can be put together very cheaply and will fly just as well. #growthehobby
cults
$3
Lumenier qav-x race pod gopro mount
...lumenier qav-x race pod gopro mount cults gopro fpv racing quadcopters freestyle luminier qav-x qav210 realacc lumenier qav-x race...
cults
$3
Race car Speedstream
...l inspired by a famous model porsche carrera. it is suitable for adults and kids.
for axle, we use 2mm thick bike spokes :d
cults
$1
Inductrix / Tiny Whoop light racing frame
...s, black is esun abs plus / pro, translucent orange is esun petg.
short video of flight:
https://goo.gl/photos/sryxmps8okynhrsz9
cults
free
Simple, Easy Quadcopter/FPV Racing Drone
...as that's what it looked the best in, but acrylic is definitely not the strongest material choice as it's super brittle.
Drone
cults
free
Drone
...drone
cults
awesome
cults
$2
drone
...drone
cults
cool
awesome
cults
$1
drone propeller
...e propeller
cults
educational printing3d printing art design propeller fan drone plane industrial design
drone propeller 3d model
cults
free
MINI DRONE
... solid and flexible while remaining light like a feather!
find the spare parts here : http://www.robotshop.com/en/uav-parts.html
cults
$25
Drone Quadcopter
...drone quadcopter
cults
quadcopter drone
quacopter avec des élices 10" capable de porter 1kg
100% imprimé 3d
cults
free
Drone-bot quad
...drone-bot quad
cults
robot bot futuristic future quad fly drone art toy toy
drone-bot quad serie z-22
cults
free
Pocket drone H30CH case
...pocket drone h30ch case
cults
pocket drone h30ch case
pocket drone h30ch case
cults
free
Drone Feet
...ign(v2) is stronger and will take harder landings. just use an m3 x 15 screw and a m3 nylon nut to secure the feet to the frame.
cults
free
V3 of the arm of a drone for motors syma
...v3 of the arm of a drone for motors syma
cults
3d drone engine
v3 of the arm of a drone for motors syma
cults
free
Eldryn Bio-Drone (28mm scale)
...eldryn bio-drone (28mm scale)
cults
eldryn bio-drone (28mm scale)
eldryn bio-drone (28mm scale)
Micro
cults
free
Micro Ballista
...micro ballista
cults
micro ballista
micro ballista
cults
free
Micro Planter Chess Set
...micro planter chess set
cults
micro planter chess set
micro planter chess set
cults
free
Nano to Micro sim adapter
...nano to micro sim adapter
cults
nano to micro sim adapter
nano to micro sim adapter
cults
free
Micro USB Plug Shell
...micro usb plug shell
cults
micro usb plug shell
micro usb plug shell
cults
free
Micro screwing tool 4mm / Micro screwing 4mm
...e two complementary tools for using 4 mm tips
layer thickness 0.2
shell thickness 0.6
fill rate 50%
temperature 220c °
cults
$30
Micro baby 22 v.2
...micro baby 22 v.2
cults
guns
micro baby cal. 22
cults
free
Micro Glider
...flex creating an elastic membrane.
open a new world of possibilities in order to create lightweight flying gadgets for example!
cults
free
Micro USB Dock
...outube.com/watch?v=72w5vyftc6i
read the full guide on: https://learn.adafruit.com/micro-usb-dock-for-circuit-playground/overview
cults
free
M1 Abrams Micro Tank
...the barrel every layer. i would suggest printing a whole fleet of these at once.
suggestions of what to design next are welcome.
cults
$1
Sd card; micro sd office; computer
...sd card; micro sd office; computer
cults
sd card; micro sd office; computer
Kit
cults
free
Lamp Shade Kit
...lamp shade kit
cults
lamp shade kit
lamp shade kit
cults
free
XMAS KIT by be3D
...xmas kit by be3d
cults
xmas kit by be3d
xmas kit by be3d
cults
free
chemistry and biology kit
...chemistry and biology kit
cults
chemistry and biology kit
chemistry and biology kit
cults
free
Athena Makeover Kit
...athena makeover kit
cults
athena makeover kit
athena makeover kit
cults
free
Insert kit
...insert kit
cults
toy game insert children child play toys learn
insert kit for children from 1 to 3 years old
cults
$20
Printable Architectural Kit 1
...printable architectural kit 1
cults
printable architectural kit 1
printable architectural kit 1
cults
free
DIY Sand casting kit
...diy sand casting kit
cults
diy sand casting kit
diy sand casting kit
cults
free
Steampunk Ogre Conversion Kit
...steampunk ogre conversion kit
cults
steampunk ogre conversion kit
steampunk ogre conversion kit
cults
free
FPV kit for Turnigy 9XR
...fpv kit for turnigy 9xr
cults
fpv kit for turnigy 9xr
fpv kit for turnigy 9xr
cults
free
Google Cardboard kit upgrade
...google cardboard kit upgrade
cults
google cardboard kit upgrade
google cardboard kit upgrade
100
cults
free
Micrometer 75 - 100 holder
...micrometer 75 - 100 holder
cults
micrometer 75 - 100 holder
micrometer 75 - 100 holder
cults
free
Zheng3, Now with 100% More Hat!
...zheng3, now with 100% more hat!
cults
zheng3 now with 100% more hat!
zheng3, now with 100% more hat!
cults
free
Taiwan dollar 100 & 1000
...taiwan dollar 100 & 1000
cults
taiwan dollar 100 & 1000
taiwan dollar 100 & 1000
cults
free
Easy to print Generic Excavator (esc: 1:100)
...nt generic excavator (esc: 1:100)
cults
easy to print generic excavator (esc: 1:100)
easy to print generic excavator (esc: 1:100)
cults
free
Easy to print Generic Bulldozer (esc: 1:100)
...t generic bulldozer (esc: 1:100)
cults
easy to print generic bulldozer (esc: 1:100)
easy to print generic bulldozer (esc: 1:100)
cults
free
Pheon 100
...ome pheon100 for your, there is lowpoly model and highpoly model.
printed on prusa mk2 0.2mm layer h.
cheers from makerslab team
cults
free
Easy to print Generic Front Loader (esc: 1:100)
...c front loader (esc: 1:100)
cults
easy to print generic front loader (esc: 1:100)
easy to print generic front loader (esc: 1:100)
cults
$4
"New Routemaster" Bus. 1:100 Model.
...ing etc.
best printed with an sla printer or polyjet etc. to resolve the fine detail of the window mouldings and headlights etc.
cults
free
String Trimmer Re-Spooler AF-100
...r that should be compatible with an m6 bolt.
see more at my blog: http://kiltedcraftworks.com/2017/04/01/feb-mar-2017-3d-prints
cults
free
wall mount for 100 ml spice bottle / wide neck reagent bottle
...double sided tape and taped them to the cabinet door. therefore only three screws were nessecary to mount 10 of them to the door.
Mini
cults
free
Imac Mini- IPad mini Imac
...imac mini- ipad mini imac
cults
imac mini ipad mini-
imac mini- ipad mini imac
cults
free
bmw mini
...bmw mini
cults
bmw mini
bmw mini
cults
free
Mini Tentacles
...mini tentacles
cults
mini tentacles
mini tentacles
cults
free
Mini vase
...mini vase
cults
mini vase
mini vase
cults
free
Mini Compressor
...mini compressor
cults
mini solidworks
cults
$1
Shovel (mini)
...shovel (mini)
cults
mini shovel
realization of a mini excavator for my gardening (repotage) or possibly the kitchen in pla
cults
$10
Mini Storage Cabinet
...mini storage cabinet
cults
mini cabinet mini cabinet storage
mini cabinet
cults
$2
Mini golf
...ail accessories (blackcurrant-flag)
- a mini golf club and its ball
add elements to the tracks to increase the difficulty.
cults
free
Mini planter
...
mini planter tree geodesic geomatric decoration home
this is a geomatric mini planter. use for small plants in home, office,shop
cults
free
Modified Carabiner Mini
...modified carabiner mini
cults
modified carabiner mini
modified carabiner mini
First
cults
free
First Trophy
...first trophy
cults
first trophy
first trophy
cults
free
Baby's First Mace
...baby's first mace
cults
baby's first mace
baby's first mace
cults
free
Baby My first christmas
...baby my first christmas
cults
christmas decoration impression 3d first christmas
to hang on christmas tree ******
cults
free
fir my first christmas
...fir my first christmas
cults
fir christmas imprission 3d decoration my first christmas
to hang on the christmas tree **********
cults
free
Keychain first name
...first name
noa
enzo
joanna
kenzo
d'autres prénoms viendront s'ajouter au fur et à mesure des demandes de mon entourage.
cults
free
first name celine
...first name celine
cults
i created this name celine on an oval support, i can create another name if you ask mrc cordially
cults
free
First Take Off of a fully printed (FDM) sailplane.
...nted (fdm) sailplane.
cults
first take off of a fully printed (fdm) sailplane.
first take off of a fully printed (fdm) sailplane.
cults
free
Cookie cutters - Tear drop and Flower (First Project)
...(first project)
cults
cookie cutters - tear drop and flower (first project)
cookie cutters - tear drop and flower (first project)
cults
free
Bee the First adapter for MakerBot Mini PLA spools
...erbot mini pla spools
cults
bee the first adapter for makerbot mini pla spools
bee the first adapter for makerbot mini pla spools
cults
free
The way of the exploding first sprite
...sprite
cults
3d slash amstrad cpc retrogaming retro_gaming sprites video_game_character
from the 80's retro game amstrad cpc
Amp
cults
free
Decoration &
...decoration &
cults
& symbol decoration modern useful inside house living room decorative object
&
cults
free
SCREW & NUT
...screw & nut
cults
screw & nut
screw & nut
cults
free
Planter2 & Tray2
...planter2 & tray2
cults
planter2 & tray2
planter2 & tray2
cults
free
Planter3 & Tray3
...planter3 & tray3
cults
planter3 & tray3
planter3 & tray3
cults
free
Planter & Tray
...planter & tray
cults
planter & tray
planter & tray
cults
free
Nut & Bolt
...nut & bolt
cults
nut & bolt
nut & bolt
cults
free
Wooly && Lazy Sheep
...gned by us and you can find more information about its designer through the link below:
https://www.thingiverse.com/thing:95721
cults
free
JOJO - Soft & Wet
...jojo - soft & wet
cults
jojo - soft & wet
jojo - soft & wet
cults
free
Pen & Pencil holder
...pen & pencil holder
cults
pen & pencil holder
pen & pencil holder
cults
free
Philae & Tchouri 67P
...philae & tchouri 67p
cults
philae & tchouri 67p
philae & tchouri 67p