Thingiverse
E3D V6 Titan Radial Fan Heatbreak Cooler
by Thingiverse
Last crawled date: 5 years, 6 months ago
E3D-V6-Titan-Radial-Fan-Heatbreak-Cooler
License: GPL-2.0+ -- GPL Version 2.0 or later.
Copyright 2019 Tobias Frost
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
The complete GPL License text should be part of this repository.
For the avoidance of doubt, "program" can be replaced with "work" in
the license grant above.
You can find the "original" git repository on [github].
What is this?
This is an adapter to allow to mount a radial fan to the fan shroud of a
E3D-V6 using a [titan] as extruder.
As radial fans are more powerful to work against resistance (e.g a fanduct)
this adapter improves the cooling of the heat break, working against possible
jams due to that. (and of course the fan is bigger :)
This adapter should work with every printer that supports the Titan, but note that
the thickness is 12 mm while your axial fan might be around 7 mm.
I use it on my CL-260 together with my Titan mod, also available in this repo
and on thingiverse: [titan-carrier]
This design is for the mirrored Titan. However, I do not see any reason why it should not work for the regular one, too after you have mirrored the bracket.
CAD Model
The CAD model can be opened using FreeCAD. It was developed using version 0.18
on Debian.
The CAD model ist structured in 4 parts: Design, Printables, Assembly and 3rd-Party parts.
The first section are the "raw" designs, suitable for modifications. it also shows
the complete assembly.
The printables section show the parts that you need to print in (IMHO) the recommendated
orientation on the print bed.
The Assembly section shows an example assembly with my titan carrier.
(the 3rd part, 3rd party models is described below)
Parts and Printing
Fanattachment-Titan
This part allows that the radial fan be mounted on the Titan. It uses two screws of
the titan assembly for that. You possibly need to replace the Titan screws with bit
larger ones.
The fan is assembled using a M4x20mm screws with hex nuts going into the part. One of the
holes is slotted to allow for different fan types, you probably want to add some glue
to fix the hex nuts when assembled.
Prints without support.
Fanadapter-30mm-Radial
This screws to the original E3D V6 fan shroud.
The radial just fan slides into the top part.
Prints without support.
3rd Party Models
The FreeCAD Model may also contain a few external objects, listed below with their license:
Those model are only used for illustration, so they are not "derived" work and not subject
to the GPL license of the remaining work.
The Titan assembly model has been modified to have the mirrored version and the
stepper motor / mounting bracket removed.
You can find the parts in the "3rd Party Models" Group of the FreeCAD file and as a subfolder
in the git repository as source.
Part
License
Author
Source
E3D_v6_To_Spec
CC BY 3.0
lXGaimMasterXl
https://www.thingiverse.com/thing:341689
50mm radial fan
CC BY 3.0
Brendon Tower
https://www.thingiverse.com/thing:2717523
Titan Assembly
GPL 3.0+
E3D
https://files.e3d-online.com/Titan/ASM_EX_THUMB_SCREW.stp
E3DV6 Fan Duct
GPL 2.0
joshuarowley42
https://www.thingiverse.com/thing:340312
References
[github] https://github.com/coldtobi/tobis_cl260_modifications
[titan-carrier] https://www.thingiverse.com/thing:4065490
[titan] https://e3d-online.com/titan-extruder
License: GPL-2.0+ -- GPL Version 2.0 or later.
Copyright 2019 Tobias Frost
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
The complete GPL License text should be part of this repository.
For the avoidance of doubt, "program" can be replaced with "work" in
the license grant above.
You can find the "original" git repository on [github].
What is this?
This is an adapter to allow to mount a radial fan to the fan shroud of a
E3D-V6 using a [titan] as extruder.
As radial fans are more powerful to work against resistance (e.g a fanduct)
this adapter improves the cooling of the heat break, working against possible
jams due to that. (and of course the fan is bigger :)
This adapter should work with every printer that supports the Titan, but note that
the thickness is 12 mm while your axial fan might be around 7 mm.
I use it on my CL-260 together with my Titan mod, also available in this repo
and on thingiverse: [titan-carrier]
This design is for the mirrored Titan. However, I do not see any reason why it should not work for the regular one, too after you have mirrored the bracket.
CAD Model
The CAD model can be opened using FreeCAD. It was developed using version 0.18
on Debian.
The CAD model ist structured in 4 parts: Design, Printables, Assembly and 3rd-Party parts.
The first section are the "raw" designs, suitable for modifications. it also shows
the complete assembly.
The printables section show the parts that you need to print in (IMHO) the recommendated
orientation on the print bed.
The Assembly section shows an example assembly with my titan carrier.
(the 3rd part, 3rd party models is described below)
Parts and Printing
Fanattachment-Titan
This part allows that the radial fan be mounted on the Titan. It uses two screws of
the titan assembly for that. You possibly need to replace the Titan screws with bit
larger ones.
The fan is assembled using a M4x20mm screws with hex nuts going into the part. One of the
holes is slotted to allow for different fan types, you probably want to add some glue
to fix the hex nuts when assembled.
Prints without support.
Fanadapter-30mm-Radial
This screws to the original E3D V6 fan shroud.
The radial just fan slides into the top part.
Prints without support.
3rd Party Models
The FreeCAD Model may also contain a few external objects, listed below with their license:
Those model are only used for illustration, so they are not "derived" work and not subject
to the GPL license of the remaining work.
The Titan assembly model has been modified to have the mirrored version and the
stepper motor / mounting bracket removed.
You can find the parts in the "3rd Party Models" Group of the FreeCAD file and as a subfolder
in the git repository as source.
Part
License
Author
Source
E3D_v6_To_Spec
CC BY 3.0
lXGaimMasterXl
https://www.thingiverse.com/thing:341689
50mm radial fan
CC BY 3.0
Brendon Tower
https://www.thingiverse.com/thing:2717523
Titan Assembly
GPL 3.0+
E3D
https://files.e3d-online.com/Titan/ASM_EX_THUMB_SCREW.stp
E3DV6 Fan Duct
GPL 2.0
joshuarowley42
https://www.thingiverse.com/thing:340312
References
[github] https://github.com/coldtobi/tobis_cl260_modifications
[titan-carrier] https://www.thingiverse.com/thing:4065490
[titan] https://e3d-online.com/titan-extruder