Thingiverse
E3D V6 Extruder Head Assembly With Cardan Shaft Direct Drive by astfaellergerald
by Thingiverse
Last crawled date: 3 years ago
Open source project
Direct extruder on printhead for 3D printer e.g. Cl-260,
powered by flexible carbon linear shaft with 6 universal joints.
The 6 steel cardan joints L24mm / Ø11mm, bore Ø5 / 5mm and 6 L60 / Ø5 / 3mm carbontubes drive the extruder vertically via a worm gear.
The bending angle of the chain links is limited to 30° to protect the joints.
The motor suspension is rotatable between 2 ball bearings.
Extruder with stable quick assembly, rotatable via ball bearing
(also with adapters for CL 260 or Ultimaker 2).
The drive is independent from the horizontal movement of the print head.
A compact and robust 1:16 scale gearbox (adapted in 3 axes for good contact).
Printhead for linear bearings 9mm / 11mm, with extruder cooler 40mm,
filament cooler 40mm, with solid screw connections.
Plastic weight:
about 50 grams.
Required parts:
5 X Pulley Ball Bearing Ø11 / 3mm, 4mm for filament guide
(optional 4 x ball bearing Ø8 / 3mm, 3mm)
8 X Ball Bearing Ø11 / 5mm, 4mm
2 X for gear worm
2 X for extruder gear
2 X for engine mounting
1 X as an abutment for filament pressure on gear
(optional Ø11 / 3mm pulley ball bearing can be used)
1 X for extruder attachment on the printhead or printhead
adapter
25 x M3 bolts with nuts in different lengths
4 x M3 set screws for shaft coupling and worm gear)
4 x M5 screws 12mm (for engine mounting)
6 steel cardan joints L24mm / Ø11mm, hole Ø5 / 5mm,
(Optionally, you can also use the STL print version, preferably
for metal printing)
1 coupling for 5mm axle,
(If preferred, you can also use the STL print version
for M3 grub screws)
1 carbon tube outside Ø5mm / inside Ø3mm ca. 1m
cut to: 7 X 58mm (for linear shaft sections and motor connection)
1 X approx. 100mm (as axle for gear worm and shaft connection)
1 X 50mm (as axis for extruder gear)
1 X about 30mm (as axis for extruder connection and
filament feed tube on the printhead
1 carbon rod outside Ø3mm / approx. 1m
Glue inside as reinforcement for the shaft pieces
and for filament guide brackets
(of course you can also use Teflon hose)
E3D-V5 Hotend with radiator
2 x 40mm fans
Assembly:
The carbon tubes work well with a mini cut-off grinder
cut under water jet to avoid the toxic dust.
I drilled all holes after printing
and reworked all pressure parts with a metal file
where necessary to avoid friction losses.
For quick installation, I set up all cables uniformly with 2mm
gold plugs
each connected to the printhead and the motor and secured
with cable ties
(color with heat shrink tubing!).
The filament guide I have with pulleys
on 3mm carbon tubes
and with appropriately bent 1mm wire attached,
(works with Teflon tube as well of course)
The error in universal joints is fully compensated
by the paired arrangement,
Therefore, make sure that the lever arms of two cardan joints
is always exactly in line.
Open source Projekt
Direkt extruder auf Druckkopf für 3D- Drucker z.B. Cl-260,
angetrieben via flexibler Carbon-Linear-Welle mit 6 Kardangelenken
Die 6 Stahl-Kardangelenke L24mm/Ø11mm, Bohrung Ø5/5mm und 6 L60/Ø5/3mm Carbonrohre
treiben den extruder vertikal über ein Schneckengetriebe an.
Der Knickwinkel der Kettenglieder ist auf 30° begrenzt um die Gelenke zu schonen.
Motor Aufhängung drehbar zwischen 2 Kugellagern
Extruder mit stabiler Schnellmontage, drehbar via Kugellager
(auch mit Adaptern für CL 260 oder Ultimaker 2),
der Antrieb ist unabhängig von der horizontalen Bewegung des Druckkopfes,
kompaktes und robustes Scneckenggetriebe 1:16, (in 3 Achsen angepasst für guten Kontakt),
Druckkopf für Linearlager 9mm/ 11mm, mit extruderkühler40mm,
filamentkühler 40mm, mit soliden Schraubverbindungen
Plastikgewicht: ca 50 Gramm.
benötigte Teile:
5 X Seilrollen- Kugellager Ø11/3mm, 4mm für filament- Führung
(optional 4 X Kugellager Ø8/3mm, 3mm)
8 X Kugellager Ø11/5mm, 4mm,
2 X für Getriebeschnecke
2 X für extruder- Zahnrad
2 X für Motoraufhängung
1 X als Gegenlager für filament- Andruck auf Zahnrad
(optional auch Ø11/3mm Seilrollen- Kugellager verwendbar)
1 X für extruder- Befestigung auf dem Druckkopf bzw. Druckkopf- Adapter
25 X M3 Schrauben mit Muttern in unterschiedliche Längen,
4 X M3 Madenschrauben für Wellenkupplung und Getriebeschnecke)
4 X M5 Schrauben 12mm (für Motoraufhängung)
6 Stahl- Kardangelenke L24mm/Ø11mm, Bohrung Ø5/5mm,
(optional kann man auch die STL- Druckversion vorzugsweise für Metalldruck verwenden)
1 Kupplung für 5mm Achse,
(optional kann man auch die STL- Druckversion für M3 Madenschrauben verwenden)
1 Carbonrohr außen Ø5mm/innen Ø3mm ca. 1m
geschnitten auf: 7 X 58mm (für Linearwellenteilstücke und Motorverbindung)
1 X ca. 100mm (als Achse für Getriebeschnecke und Wellenverbindung)
1 X 50mm (als Achse für extruder- Zahnrad),
1 X ca 30mm (als Achse für extruder- Verbindung und
filament- Zufuhrrohr auf dem Druckkopf,
1 Carbonstange außen Ø3mm/ ca. 1m
als Verstärkung für die Wellenstücke innen einkleben
und für filament- Führungshalterungen
(optional kann man natürlich auch Teflonschlauch verwenden)
E3D-V5 Hotend mit Kühler.
2 X 40mm Lüfter
Zusammenbau:
Die Carbonrohre lassen sich gut mit einem Mini Trennschleifer
unter Wasserstrahl schneiden um den giftigen Staub zu vermeiden.
Alle Bohrungen habe ich nach dem Druck nachgebohrt
und alle Druckteile mit der Metallfeile wo nötig nachgearbeitet,
um Reibungsverluste zu vermeiden.
Alle Kabel habe ich zur schnellen Montage einheitlich mit 2mm Goldsteckern
jeweils am Druckkopf und am Motor verbunden und mit Kabelbindern befestigt
(farblich markieren mit Schrumpfschlauch!)
Die filament- Führung habe ich mit Seilrollen auf 3mm Carbonrohren
und mit entsprechend gebogenem 1mm Draht befestigt,
(funktioniert natürlich auch mit Teflonschlauch)
Der Fehler bei Kardangelenken wird durch die paarweise Anordnung vollständig ausgeglichen,
deshalb ist darauf zu achten, daß die Hebelarme zweier Kardangelenke
immer exakt in einer Linie sind.
Direct extruder on printhead for 3D printer e.g. Cl-260,
powered by flexible carbon linear shaft with 6 universal joints.
The 6 steel cardan joints L24mm / Ø11mm, bore Ø5 / 5mm and 6 L60 / Ø5 / 3mm carbontubes drive the extruder vertically via a worm gear.
The bending angle of the chain links is limited to 30° to protect the joints.
The motor suspension is rotatable between 2 ball bearings.
Extruder with stable quick assembly, rotatable via ball bearing
(also with adapters for CL 260 or Ultimaker 2).
The drive is independent from the horizontal movement of the print head.
A compact and robust 1:16 scale gearbox (adapted in 3 axes for good contact).
Printhead for linear bearings 9mm / 11mm, with extruder cooler 40mm,
filament cooler 40mm, with solid screw connections.
Plastic weight:
about 50 grams.
Required parts:
5 X Pulley Ball Bearing Ø11 / 3mm, 4mm for filament guide
(optional 4 x ball bearing Ø8 / 3mm, 3mm)
8 X Ball Bearing Ø11 / 5mm, 4mm
2 X for gear worm
2 X for extruder gear
2 X for engine mounting
1 X as an abutment for filament pressure on gear
(optional Ø11 / 3mm pulley ball bearing can be used)
1 X for extruder attachment on the printhead or printhead
adapter
25 x M3 bolts with nuts in different lengths
4 x M3 set screws for shaft coupling and worm gear)
4 x M5 screws 12mm (for engine mounting)
6 steel cardan joints L24mm / Ø11mm, hole Ø5 / 5mm,
(Optionally, you can also use the STL print version, preferably
for metal printing)
1 coupling for 5mm axle,
(If preferred, you can also use the STL print version
for M3 grub screws)
1 carbon tube outside Ø5mm / inside Ø3mm ca. 1m
cut to: 7 X 58mm (for linear shaft sections and motor connection)
1 X approx. 100mm (as axle for gear worm and shaft connection)
1 X 50mm (as axis for extruder gear)
1 X about 30mm (as axis for extruder connection and
filament feed tube on the printhead
1 carbon rod outside Ø3mm / approx. 1m
Glue inside as reinforcement for the shaft pieces
and for filament guide brackets
(of course you can also use Teflon hose)
E3D-V5 Hotend with radiator
2 x 40mm fans
Assembly:
The carbon tubes work well with a mini cut-off grinder
cut under water jet to avoid the toxic dust.
I drilled all holes after printing
and reworked all pressure parts with a metal file
where necessary to avoid friction losses.
For quick installation, I set up all cables uniformly with 2mm
gold plugs
each connected to the printhead and the motor and secured
with cable ties
(color with heat shrink tubing!).
The filament guide I have with pulleys
on 3mm carbon tubes
and with appropriately bent 1mm wire attached,
(works with Teflon tube as well of course)
The error in universal joints is fully compensated
by the paired arrangement,
Therefore, make sure that the lever arms of two cardan joints
is always exactly in line.
Open source Projekt
Direkt extruder auf Druckkopf für 3D- Drucker z.B. Cl-260,
angetrieben via flexibler Carbon-Linear-Welle mit 6 Kardangelenken
Die 6 Stahl-Kardangelenke L24mm/Ø11mm, Bohrung Ø5/5mm und 6 L60/Ø5/3mm Carbonrohre
treiben den extruder vertikal über ein Schneckengetriebe an.
Der Knickwinkel der Kettenglieder ist auf 30° begrenzt um die Gelenke zu schonen.
Motor Aufhängung drehbar zwischen 2 Kugellagern
Extruder mit stabiler Schnellmontage, drehbar via Kugellager
(auch mit Adaptern für CL 260 oder Ultimaker 2),
der Antrieb ist unabhängig von der horizontalen Bewegung des Druckkopfes,
kompaktes und robustes Scneckenggetriebe 1:16, (in 3 Achsen angepasst für guten Kontakt),
Druckkopf für Linearlager 9mm/ 11mm, mit extruderkühler40mm,
filamentkühler 40mm, mit soliden Schraubverbindungen
Plastikgewicht: ca 50 Gramm.
benötigte Teile:
5 X Seilrollen- Kugellager Ø11/3mm, 4mm für filament- Führung
(optional 4 X Kugellager Ø8/3mm, 3mm)
8 X Kugellager Ø11/5mm, 4mm,
2 X für Getriebeschnecke
2 X für extruder- Zahnrad
2 X für Motoraufhängung
1 X als Gegenlager für filament- Andruck auf Zahnrad
(optional auch Ø11/3mm Seilrollen- Kugellager verwendbar)
1 X für extruder- Befestigung auf dem Druckkopf bzw. Druckkopf- Adapter
25 X M3 Schrauben mit Muttern in unterschiedliche Längen,
4 X M3 Madenschrauben für Wellenkupplung und Getriebeschnecke)
4 X M5 Schrauben 12mm (für Motoraufhängung)
6 Stahl- Kardangelenke L24mm/Ø11mm, Bohrung Ø5/5mm,
(optional kann man auch die STL- Druckversion vorzugsweise für Metalldruck verwenden)
1 Kupplung für 5mm Achse,
(optional kann man auch die STL- Druckversion für M3 Madenschrauben verwenden)
1 Carbonrohr außen Ø5mm/innen Ø3mm ca. 1m
geschnitten auf: 7 X 58mm (für Linearwellenteilstücke und Motorverbindung)
1 X ca. 100mm (als Achse für Getriebeschnecke und Wellenverbindung)
1 X 50mm (als Achse für extruder- Zahnrad),
1 X ca 30mm (als Achse für extruder- Verbindung und
filament- Zufuhrrohr auf dem Druckkopf,
1 Carbonstange außen Ø3mm/ ca. 1m
als Verstärkung für die Wellenstücke innen einkleben
und für filament- Führungshalterungen
(optional kann man natürlich auch Teflonschlauch verwenden)
E3D-V5 Hotend mit Kühler.
2 X 40mm Lüfter
Zusammenbau:
Die Carbonrohre lassen sich gut mit einem Mini Trennschleifer
unter Wasserstrahl schneiden um den giftigen Staub zu vermeiden.
Alle Bohrungen habe ich nach dem Druck nachgebohrt
und alle Druckteile mit der Metallfeile wo nötig nachgearbeitet,
um Reibungsverluste zu vermeiden.
Alle Kabel habe ich zur schnellen Montage einheitlich mit 2mm Goldsteckern
jeweils am Druckkopf und am Motor verbunden und mit Kabelbindern befestigt
(farblich markieren mit Schrumpfschlauch!)
Die filament- Führung habe ich mit Seilrollen auf 3mm Carbonrohren
und mit entsprechend gebogenem 1mm Draht befestigt,
(funktioniert natürlich auch mit Teflonschlauch)
Der Fehler bei Kardangelenken wird durch die paarweise Anordnung vollständig ausgeglichen,
deshalb ist darauf zu achten, daß die Hebelarme zweier Kardangelenke
immer exakt in einer Linie sind.
Similar models
3dwarehouse
free
E3D V6 Extruder Head Assembly With Cardan Shaft Direct Drive
...ing ø11 / 3mm, 4mm for filament guide (optional 4 x ball bearing ø8 / 3mm, 3mm) 8 x ball bearing ø11 / 5mm, 4mm 2 x for gear worm
thingiverse
free
3D Drucker mit Kreuzkinematik mit 120g Direct Extruder, Nema 14 Stepper und kugelgelagertem Druckkopf auf Carbonwellen by astfaellergerald
...drill, grind at high speed.
then clean and grease well.
then connect the motor to the worm axis using the 4 / 5mm shaft coupling.
thingiverse
free
Energiekettenhalter für Shapeoko 2 nach Umbau auf Trapezgewindespindel by dukesierra
...ewindespindel by dukesierra
thingiverse
halter für die energieketten der y-achse und x-achse nach umbau auf trapezgewindespindel
thingiverse
free
TopsCNC SFU1204 Komplett Umbau by kamibal
...hrt geht das nicht.
benötigt werden:
kugellager 6000z
flanschlager kp000
zylinderkopf schrauben m5 100mm
m10x1 feingewinde mutter
thingiverse
free
Z Achsschlitten auf Nutrollen für Aluprofil 20x40 Nut 6 by Druckmaus
...und auch die aufnahme für 2 linearachsen (x-achse) bieten hierauf platz. zusätzlich sind 2 aufnahmen für umlenkrollen vorgesehen.
thingiverse
free
TopsCNC SFU1204 Umbau by kamibal
...ur d=11,6mm
zu haben sind hier die x und y sfu1204 mutter halterung, die grundplatte hinten und passende schleppketten halterung.
thingiverse
free
Tronxy X5SA Pro Z-Riemenspanner / Belt Tensioner by Walker56
... über ein make mit foto sehr freuen.
wer sich für meine anderen designs interessiert:https://www.thingiverse.com/walker56/designs
thingiverse
free
Sparkcube (und andere) Druckkopf mit Beleuchtung für E3D V6 by Rolfiklein
...n usern habe ich den kühlkanal jetzt auch noch mit schräg nach innen gerichteten blaslöchern geändert. ist die datei kanalspk.stl
thingiverse
free
Tronxy X5SA Pro Z-Feder-Riemenspanner / Belt Tensioner by Walker56
... über ein make mit foto sehr freuen.
wer sich für meine anderen designs interessiert:https://www.thingiverse.com/walker56/designs
thingiverse
free
Vertex k8400 Extruder upgrade MK8 by lordofdatatrash
...lex filament bestens geeignet.
benötigt wird
ein rillenkugellager 608zz
ein mk8 filament-antriebszahnrad
8mm achse für kugellager
Astfaellergerald
thingiverse
free
hypercube-lowpoly by astfaellergerald
...cube-lowpoly by astfaellergerald
thingiverse
hypercube-lowpoly is a optimal reference- model to test the quality of your printer
thingiverse
free
Kitchen hook (Küchenhaken) für 16 mm Türe by astfaellergerald
...en hook (küchenhaken) für 16 mm türe by astfaellergerald
thingiverse
gedruckt mit pla designed mit sketchup für küchentüre 16 mm
thingiverse
free
camera_gimbal_mount by astfaellergerald
...omi yi- camera
die hardware giebt es z. b. hier: http://www.ebay.de/itm/201599737872
es werden dafür einige 3m schrauben benötigt
thingiverse
free
160503_Tricopter-01 by astfaellergerald
... m3 schraube
2 kugellager 9/ 4mm
1 digital servo 24mm
ich benutze dafür eine
graupner mz12 fernsteuerung mit empfänger hott gr-18
thingiverse
free
Savonius Darrieus Turbine by astfaellergerald
...leber für die flügel
ca 250g abs und 12 std. druckzeit
die turbine verbindet die vorteile der savonius- und der darrieus- turbine
thingiverse
free
panoramic head/ Panoramakopf by astfaellergerald
...kompakte bauweise einfache schnelle handhabung
nachrüstbar mit funk- fernbedienung für den motor
(letztes update am 30. 07. 2016)
thingiverse
free
Collapsible Smartphone VR Goggles by astfaellergerald
... the focusing screw threads turns clockwise, the other counter-clockwise. i might make both go the same way in a future revision.
thingiverse
free
Landing gear for drone Cheerson CX-20 Quadcopter by astfaellergerald
...mehr platz für die camera
für den bau wird benötigt:
4 carbonrohre ø 5mm/ 75mm
2 carbonrohre ø 5mm/ 140mm
2 m2 schrauben ca 12mm
thingiverse
free
Collapsible Smartphone VR Goggles-X by astfaellergerald
...lament durchgeführt. möglicherweise muss
beim drucken mit pla neu skaliert werden, um die schrumpfung mit abs zu berücksichtigen.
thingiverse
free
Wind_Blade für Mini - Windrad mit brushless Generator by astfaellergerald
...mm
das original windrad giebt es hier:https://www.amazon.de/gp/product/b00gpidzmg/ref=oh_aui_detailpage_o04_s00?ie=utf8&psc=1
Cardan
3d_export
$5
cardan
...cardan
3dexport
cardan
3ddd
$1
Cardan
...cardan
3ddd
стул
dimensions:
660 mm 673 mm 940 mm
3d_export
$5
Cardan Joint 3D Model
...cardan joint 3d model
3dexport
cardan joint
cardan joint 3d model fau 71171 3dexport
3ddd
free
светильник 34W CARDAN MODULE
...светильник 34w cardan module
3ddd
cardan
двойной карданный светильник на основе светодиодного модуля от edison opto
3ddd
$1
Струнный светильник Paulmann Spot Cardan
...тикул 70.66
производитель paulmann(германия)
диаметр 110 мм
mатериал металл
расстояние между струнами 125 мм
цвет алюминий
3ddd
$1
9W Cardan Light
...ргово-офисных помещений.
область применения
бутики и супермаркеты
общественные интерьеры
кафе и рестораны
офисы и бизнес-центры
3d_export
$25
Delta Light Grid In spotlights collection 3D Model
...fixtures fixture lamp directional adjustable luminaire recessed built-in downlight cardan system set deltalight delta light grid in spotlights collection...
3d_export
$20
Artemide Architectural Nothing ceiling spotlights collection 3D Model
...lamp lamps rigged luminaire ceiling surface recessed built-in downlight cardan system set artemide architectural nothing ceiling spotlights collection 3d...
thingiverse
free
Cardanic joint
...cardanic joint
thingiverse
fully functional 3d printed cardanic joint
3d_sky
free
Cardan
...cardan
3dsky
dimensions:
660 mm 673 mm 940 mm
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
Shaft
3d_export
$5
shaft handle
...shaft handle
3dexport
shaft handle
3d_export
$5
shaft bracket
...shaft bracket
3dexport
shaft bracket
turbosquid
$3
Shaft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
shaft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
crank shaft
...crank shaft
3dexport
crank shaft with piston with different materials
3d_export
$8
shaft bearing
...shaft bearing
3dexport
shaft bearing m10, m12,m16, m20 and m27
3d_export
$5
hexagonal shaft knob
...hexagonal shaft knob
3dexport
hexagonal shaft knob
3d_export
$5
shaft hand wheel
...shaft hand wheel
3dexport
shaft hand wheel
3d_export
$5
triangular shaft knob
...triangular shaft knob
3dexport
triangular shaft knob
3d_export
$5
octagonal shaft knob
...octagonal shaft knob
3dexport
octagonal shaft knob
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.
Assembly
3d_export
$7
Electronic product assembly machine assembly machine
...electronic product assembly machine assembly machine
3dexport
electronic product assembly machine assembly machine
3d_export
$15
generator assembly line
...ced and assembled in the form of module block. it is a demonstration project of generator assembly. welcome to download and learn
3d_export
$10
elevator traction machine assembly line motor assembly process
... traction machine assembly line motor assembly process
3dexport
elevator traction machine assembly line (motor assembly process)
3d_export
$16
pin assembly machine
...pin assembly machine
3dexport
pin assembly machine
3d_export
$7
tower-crane-assembly
...tower-crane-assembly
3dexport
tower-crane-assembly
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658296)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658291)
turbosquid
$100
Engine Assembly
...id
royalty free 3d model engine assembly for download as stl on turbosquid: 3d models for games, architecture, videos. (1658293)
turbosquid
$75
Platform Assembly
...royalty free 3d model platform assembly for download as blend on turbosquid: 3d models for games, architecture, videos. (1472939)
turbosquid
$15
generator assembly
...y free 3d model generator assembly for download as and sldas on turbosquid: 3d models for games, architecture, videos. (1469469)
Head
3d_export
$5
head
...head
3dexport
simulated female head.
3d_ocean
$5
Deer Head
...deer head
3docean
deer head
simple model of deer head with neck.
cg_studio
$25
Marble Head - Head A3d model
... - head a3d model
cgstudio
.ma - marble head - head a 3d model, royalty free license available, instant download after purchase.
turbosquid
$5
Head
...ad
turbosquid
royalty free 3d model head for download as max on turbosquid: 3d models for games, architecture, videos. (1230068)
turbosquid
free
Head
...
turbosquid
royalty free 3d model head for download as blend on turbosquid: 3d models for games, architecture, videos. (1276899)
turbosquid
free
The Head
...urbosquid
royalty free 3d model the head for download as max on turbosquid: 3d models for games, architecture, videos. (1386205)
3d_export
$10
bull head
...bull head
3dexport
bull head
3d_export
$5
girl head
...girl head
3dexport
head girl
3d_export
$5
Tigger-head
...tigger-head
3dexport
tigger-head
3d_export
$5
head on a spear
...head on a spear
3dexport
head on a spear