E3D Titan Extruder & V6 Hotend Carriage for Leapfrog Creatr (WIP) by redrum69

Last crawled date: 3 years, 1 month ago

This is a replacement carriage that accepts a single E3D Titan extruder, and v6 hotend!
A WORK IN PROGRESS!
Print the carriage on its side. A couple of supports are needed on the inside. The bracket also works as a 2mm spacer which is usually needed on Titan. You'll need 4 screws to mount the rear bracket. I cant remember the size off the top of my head. You may also need some different length M3 screws for the Titan on the bottom.
Fitting the v6 fan underneath is a little tricky. It will go in though, with a bit of fiddling. You may need to remove the two screws on the top of the fan for clearance. It will work fine without them.
You may have issues with the X axis endstop hitting the bracket. A quick trim resolved it for me.
The optional cooler snaps onto the front. However I found it to be a bit too low. Fix it with some sanding. I'll maybe update it later.