Thingiverse
E3D Hemera Print Head parts (gMax Upgrade) by CalebCox
by Thingiverse
Last crawled date: 4 years, 7 months ago
When the Hemera was first released there wasn't much for mounting configurations so I created my own parts to mount the extruder to my very customized gMax printer from gCreate.
This is FAR from the best print head setup for the Hemera and it's well over a year old now so if this looks complicated just skip it and keep looking for something better.
The most difficult part of this to get right is the fit between the 'HemeraMountBasePlate.stl' and 'HemeraSlidingMount.stl' files. I recommend printing those first to make sure they fit properly, I had to sand and carver out the groove for mine to make it slide in and out better.
Another note: If you want to use E3D's volcano nozzle you'll need to design a new BLtouch mount that sets the sensor to the correct height which I haven't designed yet.
This is FAR from the best print head setup for the Hemera and it's well over a year old now so if this looks complicated just skip it and keep looking for something better.
The most difficult part of this to get right is the fit between the 'HemeraMountBasePlate.stl' and 'HemeraSlidingMount.stl' files. I recommend printing those first to make sure they fit properly, I had to sand and carver out the groove for mine to make it slide in and out better.
Another note: If you want to use E3D's volcano nozzle you'll need to design a new BLtouch mount that sets the sensor to the correct height which I haven't designed yet.