Thingiverse
E3D Cyclops/Chimera Voron Afterburner toolhead by falcon14141
by Thingiverse
Last crawled date: 3 years, 1 month ago
E3D Cyclops/Chimera Voron Afterburner toolhead
These parts will allow to mount an E3D Cyclops or Chimera as a Voron Afterburner toolhead. It's a complete redesign, inspired by the standard Voron E3D v6 toolhead.
You shall be able to use your Cyclops/Chimera as a dual bowden or direct+bowden setup, depending on the configuration of your afterburner. One filament entry will have to be bowden.
I had to find a new mounting mecanism, since this is larger than the standard toolheads. There is no modification required on your Afterburner, but you'll need a flat head M3x10 to use instead of one of the M3x40. The M3x10 flat head will mount on the lower side of the carriage. The toolhead should slide up and you shall hear a "pop" when it locks in place, as it is designed to get tighter when you slide up..
If used on a voron, please use the back in version 2, to prevent collision of the toolhead with the XY joint. V2 requires moderate supports from buildplate.
The print works also as a mirror, if you prefer.
I haven't fully tested it yet, since my Afterburner is still on my desk and not yet on the printer. The mechanical parts fit as expected.
From my understanding, the newer Cyclops+ and Chimera+ have a different internal layout, with more space in between the heatbreaks. I may make a Cyclops+ / Chimera+ version later if need be.
Enjoy your prints
These parts will allow to mount an E3D Cyclops or Chimera as a Voron Afterburner toolhead. It's a complete redesign, inspired by the standard Voron E3D v6 toolhead.
You shall be able to use your Cyclops/Chimera as a dual bowden or direct+bowden setup, depending on the configuration of your afterburner. One filament entry will have to be bowden.
I had to find a new mounting mecanism, since this is larger than the standard toolheads. There is no modification required on your Afterburner, but you'll need a flat head M3x10 to use instead of one of the M3x40. The M3x10 flat head will mount on the lower side of the carriage. The toolhead should slide up and you shall hear a "pop" when it locks in place, as it is designed to get tighter when you slide up..
If used on a voron, please use the back in version 2, to prevent collision of the toolhead with the XY joint. V2 requires moderate supports from buildplate.
The print works also as a mirror, if you prefer.
I haven't fully tested it yet, since my Afterburner is still on my desk and not yet on the printer. The mechanical parts fit as expected.
From my understanding, the newer Cyclops+ and Chimera+ have a different internal layout, with more space in between the heatbreaks. I may make a Cyclops+ / Chimera+ version later if need be.
Enjoy your prints
Similar models
thingiverse
free
BigTreeTech ZSYong Mix Voron Afterburner Toolhead by falcon14141
...oron clockwork remotely mounted as bowden. printing works like a charm on my dual clockwork bowden 80cm setup.
enjoy your prints!
thingiverse
free
MK8 Toolhead for Voron Afterburner (Stock Ender 5+) by falcon14141
...unt for the stock mk8 provided with the printer.
it is remixed from the original mosquito mount made by voron.
enjoy your prints.
thingiverse
free
Voron Afterburner toolhead bowden guillotine by falcon14141
...t apply a firm push to get the magnet centered, and than use an m3x30 or m3x40 screw to push it down to depth with the tool
enjoy
thingiverse
free
D-Bot CoreXY E3D Chimera/Cyclops by Aduken
...d-bot corexy e3d chimera/cyclops by aduken
thingiverse
e3d chimera/cyclops support, bowden
thingiverse
free
Precision Piezo Orion Cyclops/Chimera (beta) by Moriquendi
...8x m3x3mm brass inserts. mounting holes are on an 18mm square.
i have not personally tested these parts, any feedback is welcome.
thingiverse
free
E3d chimera/Cyclops Kossel Effector by xile6
...t of my kossel, so i mirrored the mounting holes.
printed but havent tested since, waiting for my cyclops kit to come in the mail
thingiverse
free
Rigidbot E3D Chimera/Cyclops Bowden Mount by xAuSolarisx
...in place very well! the chimera i have is a cheap chinese clone, but the same dimensions should work perfectly for a genuine one.
thingiverse
free
Bowden mount for wanhao i3 by Flechette_Spectre
...
thingiverse
bowden mount for the wanhao i3.
to be used with e3d chimera/cyclops.
designed to be compatible with stock front fan
thingiverse
free
E3D Chimera / Cyclops Bowden Mount by Gfunk
...http://e3d-online.com/electrical/fans/50x50x15mm-12v-dc-side-blow-fan
x-carriage:http://www.thingiverse.com/thing:119616/#files
thingiverse
free
E3D Cyclops / Chimera mount for Mendel 90 by joshuarowley42
...l to some of you guys out there, it's not perfect but will be being updated in the future.
derived from nopheads mendel 90.
Falcon14141
thingiverse
free
Voron M4 Guidler with ID by falcon14141
...voron m4 guidler with id by falcon14141
thingiverse
simple remix of the voron m4 guidler to add identification of your extruder.
thingiverse
free
Voron Afterburner fan assembly with quickdisconnect by falcon14141
...female, 1 male header
8x 6x3 neodyne magnets (including +2 required for the hotend fan)
cable, solder, heatshrink, and patience!
thingiverse
free
MK8 Toolhead for Voron Afterburner (Stock Ender 5+) by falcon14141
...unt for the stock mk8 provided with the printer.
it is remixed from the original mosquito mount made by voron.
enjoy your prints.
thingiverse
free
Voron extruder to bowden 2020 mount (Clockwork or Galileo) by falcon14141
... use it as a bodwen drive
bom:
voron units and their afterburner mounting screws
2x 40mm screws
bsp 1/8 adapter
enjoy your prints
thingiverse
free
Ender 5+ 2020 mount for bowden and cable guide by falcon14141
... part can also be used to hold the stock ender5+ cable guide, if having the cables climbing z by the right side and not the back.
thingiverse
free
Voron Afterburner toolhead bowden guillotine by falcon14141
...t apply a firm push to get the magnet centered, and than use an m3x30 or m3x40 screw to push it down to depth with the tool
enjoy
thingiverse
free
BigTreeTech ZSYong Mix Voron Afterburner Toolhead by falcon14141
...oron clockwork remotely mounted as bowden. printing works like a charm on my dual clockwork bowden 80cm setup.
enjoy your prints!
thingiverse
free
Voron 2.4 jig for magnet hole drilling on Z assembly by falcon14141
...top underside. it worked for me without cutting them, they provided a spring effect to hold the part in place.
enjoy your prints!
thingiverse
free
Voron Afterburner low profile dual bowden Y-Splitter with quickdisconnect by falcon14141
...
bom:
2x m3x16 screws
1x m3x8 screw
5 m3 inserts
2x easun ecas04 bowden collets
3x 6x3mm magnets
1x 4 pin jst pcb header
have fun
Afterburner
thingiverse
free
Toothpaste afterburner by Ghiotto
...toothpaste afterburner by ghiotto
thingiverse
version of tube press
thingiverse
free
Voron 2.4 - Afterburner Volcano by ivjunior
...- afterburner volcano by ivjunior
thingiverse
adjustment of parts for use of volcano hotend in afterburner. thanks to osvali jr.
thingiverse
free
HevoRS Afterburner 2.4 by Harrdy
...hevors afterburner 2.4 by harrdy
thingiverse
a hevors and voron hotend holder merge
thingiverse
free
Duet 3 1LC Toolboard on Afterburner VORON 2.4 by dbrandao
... duet 3 1lc toolboard for the afterburner on a voron 2.4
please check www.vorondesign.com for the current version of afterburner.
thingiverse
free
VORON Afterburner for Anycubic Chiron by RicZappa
... 2.0 firmware ( https://urly.it/3c92- )
note:
the afterburner in photos is printed in pla and all tests have been done with that.
thingiverse
free
Afterburner printhead for mk8 by ChamKyoYuk
...nd, because the hotends are too expensive and i have creality mk8 hotend that can be changed nozzle with one hand , i made this.
thingiverse
free
Updated VORON Afterburner printhead for MicroSwiss hotend by addamm1
...oron for the slice engineering mosquito. this printhead is based on the latest afterburner design listed on github as version #4.
thingiverse
free
Voron afterburner mount for Tronxy XY-2 Pro by gcastle2007
...ron afterburner mount for tronxy xy-2 pro by gcastle2007
thingiverse
mount plate for voron afterburner mount to tronxy xy-2 pro.
thingiverse
free
Kingroon KP3 Voron Afterburner Base + Bltouch by nehiLo
...ingiverse
base for kingroon kp3
fan mod https://github.com/greg191134/voron/tree/master/afterburner%20optimisation/the%20warbird
thingiverse
free
Ender 3 Afterburner carriage by pheonix3330
...ender 3 afterburner carriage by pheonix3330
thingiverse
modified carriage to clear ender 3 vertical extrusion brackets
Toolhead
thingiverse
free
FLUX TOOLHEAD by yaoalen
...flux toolhead by yaoalen
thingiverse
you can put toolhead hear
thingiverse
free
RL550B toolhead by xxbombamanxx
...rl550b toolhead by xxbombamanxx
thingiverse
toolhead for dillon rl 550 b.
thingiverse
free
Olmec Toolhead by 3DPrinthings
...erse
olmec toolhead holds small tools like screwdrivers and hex keys ...
printed with matteforge filament (www.3dprinthings.eu).
thingiverse
free
Dillon 550 Toolhead Stand by RPR308
...dillon 550 toolhead stand by rpr308
thingiverse
toolhead stand for dillon 550
thingiverse
free
FLUX Toolheads BOX by wyp8711
...8711
thingiverse
flux delta+ toolheads box
※uploaded files are optimized
flux tools box:http://www.thingiverse.com/thing:2282697
thingiverse
free
Simple and Double Dillon XL 650 Toolhead stand
...ble stand for dillon xl 650 toolhead.
simple toolhead stand is 100mm x 120mm x 30mm
double toolhead stand is 200mm x 120mm x 30mm
thingiverse
free
Snapmaker 2 Toolhead Holder by gatonero
...r snapmaker 2. i designed it in freecad. it works with snapmaker 2.0 quick tool changer https://www.thingiverse.com/thing:4700986
thingiverse
free
Lulzbot TAZ 5 Sharpie/Pen Toolhead by wrvn97
...lulzbot taz 5 sharpie/pen toolhead by wrvn97
thingiverse
toolhead for holding writing utensils on a taz 5.
thingiverse
free
Creality E3D V6 Toolhead
...ns are compatable with bltouch.
to be honest i made this a while ago so i'm not entirely sure whats required on installation.
thingiverse
free
Snapmaker 2.0 ToolHead holder by JH1616
...ng downwards. wich leads to laser lense are not getting dirty / dusty. and you can leave the filament in when changing toolheads.
Voron
thingiverse
free
VORON Tag by froggy2288
...voron tag by froggy2288
thingiverse
tag for a voron 3d printer. mounts directly to 20mm aluminum extrusion.
thingiverse
free
3D Voronization of Hand by kriffe
...3d voronization of hand by kriffe
thingiverse
3d voronization of hand.
thingiverse
free
Tool Holder Voron by Struppiboy
...ngiverse
ein praktischer zangenhalter für den voron 2.4 am gehäuse.
a practical pliers holder for the voron 2.4 on the housing.
thingiverse
free
Stand Voron 2.4 by Struppiboy
...uppiboy
thingiverse
ich habe für den voron 2.4 füße für squash bälle konstruiert.
i constructed 2.4 squash balls for the voron.
thingiverse
free
Voron Gopro Mount by JacobMakes
...filming timelape videos of my voron, i changed up the design to better match the style of the voron, also made it easier to print
thingiverse
free
Voron Switchwire - Build Log by DarekNorway
...uild bog is regularly updated on hackaday:
https://hackaday.io/project/174810-voron-switchwire-3d-printer
voron switchwire frame
thingiverse
free
Voron 2.4, Orbiter1.5 Mount by madsgadeberg
...extruder mount for the voron afterburner.
print settings same as other voron parts.
bolts: 4pcs m3x20 and regular m3 heat inserts
thingiverse
free
Voron 2.4 feet by maciek13
...voron 2.4 feet by maciek13
thingiverse
.
thingiverse
free
VORON case for Viki2 LCD by fulg
...on case for viki2 lcd by fulg
thingiverse
here is a case for the viki2 lcd. it is styled to match the rest of the voron printer.
thingiverse
free
Voron M4 Guidler with ID by falcon14141
...voron m4 guidler with id by falcon14141
thingiverse
simple remix of the voron m4 guidler to add identification of your extruder.
Cyclops
thingiverse
free
Cyclops by 3D-IN
...cyclops by 3d-in
thingiverse
cyclops
thingiverse
free
cyclops by Bigtasty1
...cyclops by bigtasty1
thingiverse
its cyclops
thingiverse
free
Cyclops by cerberus333
...cyclops by cerberus333
thingiverse
cyclops
keeping an eye on thingiverse
thingiverse
free
Phoenix and Cyclops stencil
...phoenix and cyclops stencil
thingiverse
phoenix and cyclops stencil
thingiverse
free
CYCLOPS CP-11B
...cyclops cp-11b
thingiverse
cyclops cp-11b
thingiverse
free
Cyclops Chicken by MTGMAN
...cyclops chicken by mtgman
thingiverse
its a cyclops chicken of doom
thingiverse
free
Human Cyclopes by goffmadisonm
...human cyclopes by goffmadisonm
thingiverse
this was created for human cyclopes school project
thingiverse
free
Subnautica Cyclops by Verid
...subnautica cyclops by verid
thingiverse
cyclops submarine from game subnautica
thingiverse
free
Cyclops Gigant
...cyclops gigant
thingiverse
booh !
thingiverse
free
Cyclops stencil 2 by Longquang
...cyclops stencil 2 by longquang
thingiverse
cyclops
Chimera
thingiverse
free
Chimera
...chimera
thingiverse
chimera 3d model remix
thingiverse
free
Chimera by yarmendez111
...chimera by yarmendez111
thingiverse
chimera from https://fiesta.gamigo.com
thingiverse
free
chimera 7 by Raptorfpv13
...chimera 7 by raptorfpv13
thingiverse
gopro mount for reelsteady go. for iflight chimera 7 inch
thingiverse
free
Chimera+ (plus) nozzle alignment tool
...zle hotend.
chimera body is 30mm, chimera+ is 32.
nozzle offset is 18mm on chimera, 20mm on chimera+.
tested, works as expected.
thingiverse
free
Fanduct for chimera by StikkaDesign
...thingiverse
a simply fanduct for chimera (configuration with the rotating heating blocks - resistance and thermistor in lateral)
thingiverse
free
CHIMERA V& MODEL by derek1976
...chimera v& model by derek1976
thingiverse
chimera model
thingiverse
free
CHIMERA & GRAPHITE DNA by nagato
...chimera & graphite dna by nagato
thingiverse
chimera & graphite dna
thingiverse
free
DNA CHIMERA & GRAPHITE by nagato
...dna chimera & graphite by nagato
thingiverse
dna chimera & graphite
thingiverse
free
CHIMERA & GRAPHITE DNA by nagato
...chimera & graphite dna by nagato
thingiverse
chimera & graphite dna
thingiverse
free
layer fan for chimera by WallyTheBeast
...layer fan for chimera by wallythebeast
thingiverse
radial layer fan for chimera 30x30mm cooler
E3D
thingiverse
free
E3D fan Duck adapted for e3D mount by tambu22
...e3d fan duck adapted for e3d mount by tambu22
thingiverse
just try to adapt it to e3d mount
thingiverse
free
Extruder for E3D by xtopolx
...extruder for e3d by xtopolx
thingiverse
extruder for e3d
thingiverse
free
E3D mount by crota
...e3d mount by crota
thingiverse
e3d mount
thingiverse
free
UNI 3D E3D
...uni 3d e3d
thingiverse
e3d for uni 3d
thingiverse
free
Nozzle Holder E3D 8x / Düsenhalter E3D 8x by Walkabout77
...nozzle holder e3d 8x / düsenhalter e3d 8x by walkabout77
thingiverse
nozzle holder e3d 8x
thingiverse
free
E3D Support by Mamath
...e3d support by mamath
thingiverse
integrate e3d heat, for 40mm fan
thingiverse
free
E3d Cyclop and E3d Chimera by TanManGuy
... modeled up the cyclop and chimera
if looking for a fan shroud for it
(check this out- http://www.thingiverse.com/thing:614803)
thingiverse
free
E3D by alex16
...e3d by alex16
thingiverse
enclosure cooling e2d
thingiverse
free
3D model E3D V6 extruder
...3d model e3d v6 extruder.
e3d v6 radiator
e3d v6 volcano nozzle
e3d v6 heat break
e3d v6 heater block
e3d v6 volcano heater block
thingiverse
free
E3D Hemera Model
...e3d hemera model
thingiverse
official mounting cad for designing your own custom mounts for the e3d hemera.