Thingiverse
e-Ink display / thermometer outdoor logger housing by fauldrache
by Thingiverse
Last crawled date: 4 years, 10 months ago
two part (outdoor) housing for a 2.9" waveshare e-ink display and a ESP / Arduinio controller
Front part with rain protection for display (big roof over display)
Back part has a upper compartment for the controller with cables connected directly to the pin header
Lower part with a lot of ventilation openings for a DHT11 / DHT22 or any other weather sensor
Both parts can be closed with the same back plate for weather proofing
I added a shrink tube over the cables from display to controller and some hot glue in the cable hole.
You can mount both parts together using (stainless) M4-bolts, or mount the display part alone e.g. to a woode surface.
I finished it with some gray paint to match the e-ink background
I included also the step files, if you want to change / remix it.
Have fun!
Sebastian
Front part with rain protection for display (big roof over display)
Back part has a upper compartment for the controller with cables connected directly to the pin header
Lower part with a lot of ventilation openings for a DHT11 / DHT22 or any other weather sensor
Both parts can be closed with the same back plate for weather proofing
I added a shrink tube over the cables from display to controller and some hot glue in the cable hole.
You can mount both parts together using (stainless) M4-bolts, or mount the display part alone e.g. to a woode surface.
I finished it with some gray paint to match the e-ink background
I included also the step files, if you want to change / remix it.
Have fun!
Sebastian