Thingiverse
Dynam BF109 Landing Gear Spacers 4mm by atheimer
by Thingiverse
Last crawled date: 4 years ago
4mm spacer for the Dynam BF 109 landing gear. Helps to prevent the plane tipping forward on landing.
Installation: Extend the gear and remove the 4 obvious screws. Wiggle gear gently until it pulls free. Place spacer on back 'shelf'. Push gear back into place. Affix 4 screws.
Do not tighten crazy tight or you will strip the screw mounts.
If you have them, use longer screws in the back but the stock ones do tighten.
Be sure to press the gear down tightly all around be screwing.
This mod will add 10d fwd rake making landings more smooth.
Installation: Extend the gear and remove the 4 obvious screws. Wiggle gear gently until it pulls free. Place spacer on back 'shelf'. Push gear back into place. Affix 4 screws.
Do not tighten crazy tight or you will strip the screw mounts.
If you have them, use longer screws in the back but the stock ones do tighten.
Be sure to press the gear down tightly all around be screwing.
This mod will add 10d fwd rake making landings more smooth.