Thingiverse
DX COMMANDER / SPIDERPOLE BASE
by Thingiverse
Last crawled date: 4 years, 4 months ago
OK the missing part of the equation.
Having left half my dx commander base bit at the mother in laws I needed to make up another one so set about making it in a single bit that would also work with the 12M Spiderpole.
It is made in 2 bits that clip together and are secured with a bit of CA.
I made up the ring from a 3mm ali disk from ebay and chopped a hole in the middle. You can leave the base disk whole. I threaded the bolts in but as there is some plastic for the thread to bite into you might get away with out doing that.
There are a couple of wires from the PL259 connector with eyes crimped on to connect to the top and the bottom and that's about it.
So this goes with the universal spacer ringshttps://www.thingiverse.com/thing:4081868
and wire windershttps://www.thingiverse.com/thing:4082284
Having left half my dx commander base bit at the mother in laws I needed to make up another one so set about making it in a single bit that would also work with the 12M Spiderpole.
It is made in 2 bits that clip together and are secured with a bit of CA.
I made up the ring from a 3mm ali disk from ebay and chopped a hole in the middle. You can leave the base disk whole. I threaded the bolts in but as there is some plastic for the thread to bite into you might get away with out doing that.
There are a couple of wires from the PL259 connector with eyes crimped on to connect to the top and the bottom and that's about it.
So this goes with the universal spacer ringshttps://www.thingiverse.com/thing:4081868
and wire windershttps://www.thingiverse.com/thing:4082284
Similar models
thingiverse
free
DX-Commander antenna wire spacer. by theswink
...so the wire locks are push in. if you help the wire lock with your thumb nail, you can get it in relatively easy.
73's
on4ndo
thingiverse
free
Anet A8 horizontal spool holder remix by puckilie
...ded bar given with the printer you need to drill the hole out a bit... i try to make it a bit bigger so the threaded bar will fit
thingiverse
free
rotatin airbrushing disk by muvoksi
...ances are good this should be an easy print!
as awlays, please post a make if you do print this. i'd love to see your prints!
thingiverse
free
DX COMMANDER Universal antenna ring
...ottom aluminum ring somewhere im now working on a one piece connection block.. check my other creations to see when it goes live.
thingiverse
free
Stand for HEX bit holder by TM2114L3
... stand. please see http://www.thingiverse.com/thing:422819
for the bit holder itself.
please read instructions before printing.
thingiverse
free
ConstructionBot.v.1. by fuzzface
...198 for a sawhttps://www.thingiverse.com/thing:4766270 for a torsohttps://www.thingiverse.com/thing:2052010 for all sorts of bits
thingiverse
free
OS-Railway-knuckle-coupler by gfrantz
...very tiny, so breakage is very possible. i used a emery board to sand things down a bit so everything fits together as designed.
thingiverse
free
Disk brake C2
...thingiverse.com/thing:3826675
this one i had a look at and thought to print !
total falliare to split for printing so i made this
thingiverse
free
Razer Man o'War reinforced improved by SteitSlings
.... after printing the headset was a tighter fit so i used a heat gun to relieve the tension and make it a bit wider to fit better.
thingiverse
free
Armiger Lance by KabbageKop
...tion from a electrical wire around the long bit for support.
there is an adapter included to make it fit with normal armiger arms
Spiderpole
thingiverse
free
18m Spiderpole Guy Rings by chopcat
...rse
two rings to use with the 18m spiderpole for guying.
depending on your printer you might need to open the holes a little bit
thingiverse
free
18M Spiderpole to scaffold tube adapter by chopcat
...e
a simple one this. an adapter so you can slip your spidepole over a scaffold tube for use in various mounts.
20% fill is fine
Dx
design_connected
$16
Baialonga DX
...baialonga dx
designconnected
bonacina pierantonio baialonga dx computer generated 3d model. designed by viganò, giuseppe.
turbosquid
$50
Kindle DX
...lty free 3d model kindle dx for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1299453)
turbosquid
$39
DX Microphone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Electrolux EFL 10550 DX
...electrolux efl 10550 dx
3ddd
electrolux efl 10550 dx , electrolux
108х90х70 см
turbosquid
$30
Valkirie DX-1.3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Sconces DX Nord Scandinavian
...ree 3d model sconces dx nord scandinavian for download as obj on turbosquid: 3d models for games, architecture, videos. (1391994)
3d_export
$89
Daihatsu DX concept 3D Model
...to automotive realistic rig rigged animated animation wire parameters control
daihatsu dx concept 3d model fabelar 68703 3dexport
3d_export
$70
Amazon Kindle DX 3D Model
...r pdf book read listen watch video audio movie pasttime pda digital palm pilot
amazon kindle dx 3d model plutonius 16230 3dexport
3ddd
free
Baga 3230 3240/DX
...aga
люстра
артикул: 3230
высота: 96 см
диаметр: 88 см
бра
артикул: 3240/dx
высота: 34 см
ширина: 23 см
длина: 16 см
3d_export
$10
Cisco Phone DX 650 3D Model
...phone dx 650 3d model
3dexport
cisco phone office indoor internet electronics
cisco phone dx 650 3d model genkot27 91446 3dexport
Commander
turbosquid
$10
Commander
...
turbosquid
royalty free 3d model commander for download as on turbosquid: 3d models for games, architecture, videos. (1256307)
3d_export
$13
command knife
...command knife
3dexport
command knife
turbosquid
$10
Command
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$140
Command vehicle A
...
royalty free 3d model command vehicle a for download as max on turbosquid: 3d models for games, architecture, videos. (1662822)
turbosquid
$60
Tech Commander
...uid
royalty free 3d model tech commander for download as fbx on turbosquid: 3d models for games, architecture, videos. (1209942)
turbosquid
$49
Commander C40
...yalty free 3d model commander c40 for download as 3ds and 3dm on turbosquid: 3d models for games, architecture, videos. (1283262)
turbosquid
$9
Commanding Mallet
...d model commanding mallet for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1448575)
turbosquid
$100
command exc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$99
Command Vehicle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
ship commander
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Base
archibase_planet
free
Base
...base
archibase planet
base column column base
base 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base ionic - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base tuscan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$18
Base
...base
designconnected
tom dixon base computer generated 3d model. designed by dixon, tom.