Thingiverse
Dust Deputy adaptor kit for Fein Turbo Vac Shop Vac by muddyfeet
by Thingiverse
Last crawled date: 3 years, 4 months ago
Adaptor Kit to mount a Dust Deputy on top of a Fein Turbo Vacuum using 2 1/2" hose.
Parts needed:
Shop Vac brand 2 1/2" vacuum hose.
Dust Deputy DIY
5 gallon or 3.5 gallon bucket with lid.
Fein Turbo Vac.
The 90degree and Arc connectors will fit Shop-Vac brand 2 1/2" vacuum hose with the "Lock ON" connectors.
The BucketBracket2 part will sit in the hopes on top of the Fein vac to hold a 5gal bucket in place. Print (two) of them to hold in the bucket.
Parts needed:
Shop Vac brand 2 1/2" vacuum hose.
Dust Deputy DIY
5 gallon or 3.5 gallon bucket with lid.
Fein Turbo Vac.
The 90degree and Arc connectors will fit Shop-Vac brand 2 1/2" vacuum hose with the "Lock ON" connectors.
The BucketBracket2 part will sit in the hopes on top of the Fein vac to hold a 5gal bucket in place. Print (two) of them to hold in the bucket.
Similar models
thingiverse
free
Suckit dust boot Fein Vac adaptor by muddyfeet
...ein vac adaptor by muddyfeet
thingiverse
adaptor to fit a fein turbo vacuum hose into the suckit pro cnc dust boot. fits great.
thingiverse
free
Dust Deputy Hose Connector for 2" Hose by A1cPeanut
...ust deputy cyclone dust collector in your shop, this will mate with the horizontal tube off it and connect to a 2" vac hose.
thingiverse
free
Vacuum hose adaptor 2-1/4 to 1-1/4 by kentavv
... combinations. the hose should slide up snug.
http://kent-vandervelden.blogspot.com/2013/12/3d-printed-vacuum-hose-adaptor.html
thingiverse
free
Cyclone Vacuum Filter Parts by khbtech
...angle 1-1/2" pvc into the bucket from the side.
the adapter is to transition between 1-1/2" pvc and shop vacuum hose.
thingiverse
free
Dust Deputy Input to 2" Vacuum Adapter by linsomniac
...n be used to fix it to the dust deputy, and it fits deep onto the dust deputy input (which is a 2 step part, it snugs onto both).
thingiverse
free
Shop Vac Attach adaptor by lgbehr
... lgbehr
thingiverse
this is a straight adaptor and an angle (60degree) adaptor to connect a 58mm (2 1/4") shop vacuum hose.
thingiverse
free
DeWalt DW433 belt sander to 1-1/4" vacuum hose adaptor by kentavv
... the the 1-1/4" hose to 2-1/4".http://kent-vandervelden.blogspot.com/2014/10/3d-printed-belt-sander-dust-collector.html
thingiverse
free
Shop vac hose adapter for Fein 35mm to 1" by bronk
...c hose end is 35mm and the ro sander port is 1". the walls are 3mm thick and each end is 25mm long to provide a good grip.
thingiverse
free
Bosch / triton bucket hose connector by Shoutr
... of the few connectors fitted my tools nor my shopvac.
collector side: 33mm
vac side: 36.5mm (to compensate filament dilatation).
thingiverse
free
Fein Turbo vac hose nozzle end fitting by CLine
...ii vacuums. fein sells the hose assembly (#921049gn1) but not the nozzle fitting alone, which is what i needed when mine cracked.
Muddyfeet
thingiverse
free
Basic Headband by muddyfeet
...dband that prints well in pla. i have a large head, and this size seems to stay put during the day without giving me a headache.
thingiverse
free
Bumper Case for Onefinity CNC Touchscreen by muddyfeet
...muddyfeet
thingiverse
bumper case for touchscreen of onefinity cnc
printed in flexible tpu to protect against drops/falls/bumps.
thingiverse
free
Brochure Holder for MOPS (Mothers of PreSchoolers) by muddyfeet
...ifold brochures. specifically branded with the mops "m" logo printed as a separate inlay. mothers of preschoolers.
thingiverse
free
Suckit dust boot Fein Vac adaptor by muddyfeet
...ein vac adaptor by muddyfeet
thingiverse
adaptor to fit a fein turbo vacuum hose into the suckit pro cnc dust boot. fits great.
thingiverse
free
Dryer Vent Flap by muddyfeet
... the start of the glass transition temp for petg, so it should be fine. if the heat is too much it may be better printed in abs.
thingiverse
free
Toe Clamp for CNC by muddyfeet
...mm nozzle. 5 shells, 0.15layer height. fit tolerances are about 0.15mm, which makes a nice tight fit printed with a prusa mk3.
thingiverse
free
Sliding Adjustable "oops" clamps for CNC by muddyfeet
...akes a nice tight fit printed with a prusa mk3.
rear piece has option for either printed 1/4-20 threads, or a captive nut design.
thingiverse
free
Buck Converter Snap-fit enclosure LM2596 - no supports remix by muddyfeet
...s: 5
these settings print a solid part with pla. the small overhangs on the clips print fine and it snaps together well.
thingiverse
free
Drag Chain Cable Raceway for Onefinity CNC by muddyfeet
...) m4 x 10mm flat head screws to secure drag chains
(1) m4 tap for threading holes
assemble per video:https://youtu.be/x7eg7uzhg84
Deputy
thingiverse
free
Deputy Sheriff Badge by Tcorgard
...fnv. i did make the badge from the game, but some of the letters are too small to 3d print, and i could not model the little keg.
thingiverse
free
Dust Deputy Template by mrandazzo45
...t the bottom gasket also if you wish, it was much faster cutting it out of some 6mm mdf.
import as inch !
hope it works for you.
thingiverse
free
Sheriff's Deputy Hat by Skimbal
...sheriff's deputy hat by skimbal
thingiverse
"is there a problem officer?"
-me, last week
thingiverse
free
Dust Deputy Input to 2" Vacuum Adapter by linsomniac
...n be used to fix it to the dust deputy, and it fits deep onto the dust deputy input (which is a 2 step part, it snugs onto both).
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
thingiverse
free
Black Orchestra Deputy Token Holders by cdburgess
...her to hold the deputy tokens for black orchestra. you can print them yourselves or order them from https://bghq.us
happy gaming!
thingiverse
free
sunset sarsaparilla deputy badge by atomickosmo
...sunset sarsaparilla deputy badge by atomickosmo
thingiverse
you can always adjust the size
no supports
thingiverse
free
Dust Deputy Hose Connector for 2" Hose by A1cPeanut
...ust deputy cyclone dust collector in your shop, this will mate with the horizontal tube off it and connect to a 2" vac hose.
thingiverse
free
Sheriff and Deputy badges by gewalker
...se
made these this evening for my father and my nephews to play cowboy with. please don't mock my terrible openscad skills.
thingiverse
free
Sunset Sarsaparilla Deputy Badge by jujitsujoe
...'t tell him but i have made it a lot easier to own one.
i added a more screen accurate badge with the double rods on the top.
Fein
thingiverse
free
Fein-Dyson adapter by anton610
...fein-dyson adapter by anton610
thingiverse
fein multimaster to dyson vaccum adapter.
works good.
thingiverse
free
Fein 63806183013 replacement handle by mejico
...se
replacement handle for the fein 63806183013. i have made changes to the original, which hopefully will make it more durable.
thingiverse
free
Fein Vacuum - Suck It Dust Boot Adapter by dpmakestuff
...a suckit dustboot. would work for other things too as long as you have a fein vacuum. 69mm outside, 65mm inside on the fat end.
thingiverse
free
Suckit dust boot Fein Vac adaptor by muddyfeet
...ein vac adaptor by muddyfeet
thingiverse
adaptor to fit a fein turbo vacuum hose into the suckit pro cnc dust boot. fits great.
thingiverse
free
Fein dust extractor 35 mm adapter by drummerdimitri
...should fit most fein dust extractors.
to be used in order to attach various accessories with a 35 mm inlet quickly and securely.
thingiverse
free
Dyson vacuum to Fein Multimaster Adapter
...dyson vacuum to fein multimaster adapter
thingiverse
i just combined both models to fit my vacuum
thingiverse
free
Metabo Drill 50mm to Fein 53mm Drillrig Adapter Collar by tobiaskornmayer
...llrig adapter collar by tobiaskornmayer
thingiverse
this is a useful little part to mount a metabo drill inside a fein drillrig.
thingiverse
free
Fein Turbo vac hose nozzle end fitting by CLine
...ii vacuums. fein sells the hose assembly (#921049gn1) but not the nozzle fitting alone, which is what i needed when mine cracked.
thingiverse
free
Air deflection for Fein MShe 648-1 by matl_
...-1 for cooling the milling cutter bei itselfe
https://www.facebook.com/pg/cncdiymk/photos/?tab=album&album_id=503097953355027
thingiverse
free
Fein to Makita Cordless Sander Adapter by pkierstead
... ceiling or something to effectively use this as it weights things down too much.
both nozzles are tapered and should fit nicely.
Vac
thingiverse
free
Vac adapter by remf553
...vac adapter by remf553
thingiverse
vac adapter for rikon bench sander to rigid shop vac
thingiverse
free
vac adapter
...vac adapter
thingiverse
test
thingiverse
free
Shark Vac Nozzle adapter
...shark vac nozzle adapter
thingiverse
shark vac nozzle adapter
thingiverse
free
Shark Vac Attachment by banjostan
...shark vac attachment by banjostan
thingiverse
vacuum attachment for shark vac
thingiverse
free
Vac Table T Guide
...vac table t guide
thingiverse
simple vac table t guide
thingiverse
free
Shop-Vac Adapter
...apter
thingiverse
adapts a small shop-vac vacuum hose to larger dust-collection port on power tools such as my dewalt table saw.
thingiverse
free
Vac Part by rob37w
...vac part by rob37w
thingiverse
test part
thingiverse
free
Shop Vac Flange
...er's pretty snug, you will have to adjust the scale for the shrink of the material you use and how worn the shop-vac hose is.
thingiverse
free
Parkside VAC wall mount by dmikulik
...parkside vac wall mount by dmikulik
thingiverse
wall mount for parkside vac
thingiverse
free
Shop vac replacement part by abessetti
...shop vac replacement part by abessetti
thingiverse
shop vac replacement part
Turbo
thingiverse
free
Turbo by MrsBecraft
...turbo by mrsbecraft
thingiverse
turbo for car
thingiverse
free
Turbo by pugboi
...turbo by pugboi
thingiverse
made by my friend.
thingiverse
free
Turbo jet by The_LAB
...turbo jet by the_lab
thingiverse
turbo jet
thingiverse
free
Turbo compressor by marco0030
...turbo compressor by marco0030
thingiverse
just a turbo compressor
thingiverse
free
Turbo Supra by william3d
...turbo supra by william3d
thingiverse
turbo supra letters
thingiverse
free
turbo fan by felix727144
...turbo fan by felix727144
thingiverse
a turbo fan.
3mm
thingiverse
free
twin turbo snail
...twin turbo snail
thingiverse
just a snail with some turbos for shell
thingiverse
free
Turbo-Bowl: Turbo-Vase+, the Sequel Continues by jaln
...the sequel continues by jaln
thingiverse
here's some matching bowls for vase10a.
(turbo-vase+, the sequel).
scaled 1x and 2x
thingiverse
free
Turbo Impeller by Thalmano
...turbo impeller by thalmano
thingiverse
turbo impeller
hook it up to an e-motor and have fun
thingiverse
free
Turbo fins by print3dXYZ
...turbo fins by print3dxyz
thingiverse
turbo fins designed to fit standard fcs plugs. work great on a bodyboard
Adaptor
thingiverse
free
DH1 Adaptor
...dh1 adaptor
thingiverse
dh1 adaptor
thingiverse
free
Moses Adaptor
...moses adaptor
thingiverse
test adaptor for moses foil
thingiverse
free
MBB adaptor by Peter161
...mbb adaptor by peter161
thingiverse
it an adaptor to an worktool for mobil beat-beting
thingiverse
free
Tripod Adaptor by cmot17
...tripod adaptor by cmot17
thingiverse
an adaptor to put my webcam on a tripod.
thingiverse
free
tracer adaptor by renegead
...tracer adaptor by renegead
thingiverse
a tracer adaptor for 8 inch dan wesson revolver .
thingiverse
free
Shifter Adaptor by kebekwa
...shifter adaptor by kebekwa
thingiverse
jdm shifter adaptor with a 1.5 pitch to fit my s13 180sx
thingiverse
free
Valve adaptor by Daniel_Snowsurf
...o inflatable toy 5-9 mm inner diameter. for quick release schrader valve pump, not threaded.
designed in fusion 360 valve adaptor
thingiverse
free
Honeywell Evohome Adaptor
...honeywell evohome adaptor
thingiverse
adaptor for evohome thr92 thermostat to my valves. its a m28x1.0mm to m30x1.5mm adapter.
thingiverse
free
PET Adaptor by evilthingsmaker
...pet adaptor by evilthingsmaker
thingiverse
pet adaptor
print at 103% scaling in print program
this seems to be due to overlap
thingiverse
free
Bandsaw Vacuum Adaptors
...bandsaw vacuum adaptors
thingiverse
i have a grizzly bandsaw and i design few custom vacuum adaptors for it.
Dust
thingiverse
free
Dust Separator
...dust separator
thingiverse
this is a dust separator similar to the "dust deputy"
thingiverse
free
dust deputy to xcarve dust boot adapter
...e coupler to interface an inventables xcarve dust shoe hose (1.5"id) to an oneida dust deputy cyclone extractor (2"od).
thingiverse
free
DUST HOLDER by frasart
...dust holder by frasart
thingiverse
dust holder
thingiverse
free
DUST NOZZLE by frasart
...dust nozzle by frasart
thingiverse
dust nozzle
thingiverse
free
Dust remover
...l piece of sponge to each part. with the sponges this tool will remove all the dust from your filament and will prevent cloaking.
thingiverse
free
drill dust blower
...drill dust blower
thingiverse
drill dust blower
thingiverse
free
CXP Dust Cap
...cxp dust cap
thingiverse
cxp dust cap
thingiverse
free
Dust Filter by galeev
...dust filter by galeev
thingiverse
simple filament dust filter
thingiverse
free
Dust collector by Rachdie23
...dust collector by rachdie23
thingiverse
a dust collector for my saw
thingiverse
free
Dust Remover by NArdo
...dust remover by nardo
thingiverse
prototype dust remover can
Shop
thingiverse
free
shopping basket
...shopping basket
thingiverse
shopping basket
thingiverse
free
Shopping cart
...shopping cart
thingiverse
it work grate on swedish shopping cart an it works to take out when you unlocked the shopping cart.
thingiverse
free
shopping chip by Leo135Y
...shopping chip by leo135y
thingiverse
this is a smiling shopping chip !
perfect shop with fun.
thingiverse
free
Shop building
...shop building
thingiverse
shop building
checkout my profile, you can find another buildings
thingiverse
free
shopping coin by IntreD
...shopping coin by intred
thingiverse
shopping coin
thingiverse
free
Shopping basket by leonk
...shopping basket by leonk
thingiverse
shopping basket
thingiverse
free
Shopping Cart Chip
...shopping cart chip
thingiverse
shopping cart chip with a message
thingiverse
free
Shopping cart key
...shopping cart key
thingiverse
romanian shopping cart coin
thingiverse
free
Coin shopping cart
...coin shopping cart
thingiverse
a coin to use on shopping cart
thingiverse
free
Shopping cart unlocker
...shopping cart unlocker
thingiverse
unlocks shopping-cart and can be removed.
Kit
thingiverse
free
Kit Grappa - Kit Brandy by doctormao
...kit grappa - kit brandy by doctormao
thingiverse
kit grappa - kit brandy
thingiverse
free
AT-AT Kit Card by fresh1134206
...at-at kit card by fresh1134206
thingiverse
at-at kit card
thingiverse
free
Vixen Kit by eeprof
...vixen kit by eeprof
thingiverse
vixen kit
thingiverse
free
Sleeve Bonza Kit
...sleeve bonza kit
thingiverse
sleeve bonza kit
thingiverse
free
Fort Kit by MrWatermelon769
...fort kit by mrwatermelon769
thingiverse
fort kit for kids
thingiverse
free
Upholstery removal kit
...upholstery removal kit
thingiverse
upholstery removal kit
thingiverse
free
Organize Kit by Teobaldo
...organize kit by teobaldo
thingiverse
configure the organize kit with parameters.
thingiverse
free
sewing kit by ackee123
...sewing kit by ackee123
thingiverse
key fob that contains a sewing kit.
thingiverse
free
Column Kit by
...column kit by
thingiverse
you know...
thingiverse
free
Rocket Kit by IDEMLyon
...rocket kit by idemlyon
thingiverse
a little rocket kit to start using laser cutter.