Thingiverse
Dust Collector for CNC Milling Machine by nthesign
by Thingiverse
Last crawled date: 4 years, 5 months ago
Dust collector design for 6040 cnc milling machine with 80mm spindle and 120mm diameter pipe.
I made the dust collector from PET-G and I have been using it for half a year. Works great.
Additional items:
You need to buy a brush for the collector and attach it to the lower part. I did it by drilling holes and fastening it with wire.
Both parts are fastened together with four M5 screws, 25 mm long.
Use an M6 screw with a length of at least 30 mm for the clamp
The collector is best made with the parameters for the greatest strength.
I used 50% filling and 0.2 mm layer.
Enjoy :)
I made the dust collector from PET-G and I have been using it for half a year. Works great.
Additional items:
You need to buy a brush for the collector and attach it to the lower part. I did it by drilling holes and fastening it with wire.
Both parts are fastened together with four M5 screws, 25 mm long.
Use an M6 screw with a length of at least 30 mm for the clamp
The collector is best made with the parameters for the greatest strength.
I used 50% filling and 0.2 mm layer.
Enjoy :)