DUE3DOM MINI - RepRap Electronic Arduino DUE Shield by dvjcodec

Last crawled date: 3 years, 1 month ago

Tested, fully working shield for Arduino DUE - DUE3DOM MINI.
Features:
up to 4 drivers )more on expansion port)
up to 4 thermistors (one onboard)
up to 3 fans,
12-24V power supply,
separate power supply for bed, hotend and rest electronic
12V fans (with 24V power supply in)
3 fuses
EAGLE files, BOM (for large version, but 99% electronic components have same), photos.
IMPORTANT !!! Need to fix 2 places:
Add 10uF capacitor between GND and RESET pin
Add diode to DUE 12V poewr line (just cut and add 1A diode)
EXP1 on DUE3DOM = EXP2 on SmartController
EXP2 on DUE3DOM = EXP1 on SmartController
This is rev. A, but tested with a lot of people.
Supported by Repetier and Marlin DUO:https://www.repetier.com/firmware/dev/index.phphttps://github.com/esenapaj/Marlin
This electronic created with hudge support from Fabrykator.pl boards comunity.
Official website (Polish only at now) --> http://www.due3dom.pl
Official thread on Fabrykator.pl --> http://www.fabrykator.pl/board/viewtopic.php?f=12&t=242
DUE3DOM MINI model 3D:
STL --> http://www.seasidecustoms.com/pliki/DUE3DOM_MINI_STL.rar
STP --> http://www.seasidecustoms.com/pliki/DUE3DOM_MINI_STP.rar
Githubhttps://github.com/dvjcodec/Due3dom-Mini