Ducati Xdiavel Back Indicator (Blinker) 1260 by LuckyLuc94

Last crawled date: 3 years, 3 months ago

Ducati XDiavel Back Indicator Adapter
The adapter was designed and constructed for my Ducati XDiavel. I am still a beginner so I would be open for Feedbacks. The adapter is not perfect but holds up perfectly.
ATTENTION: Don't forget to generate a support structure. !!!
The adapter is attached to the chassis with an M8x40mm hex screw. I have attached the link for the screw.
M8x40mm (4mm hole) Link: https://a.aliexpress.com/_m0TW9Jr
I also used SM 2.54 connectors.
SM 2.54 connector link: https://a.aliexpress.com/_mqRG1QV
Mini LED indicators fit on the adapter, as do other indicators.
The photos give you a foretaste.
The conversion is not exactly easy, therefore technical understanding as well as craftsmanship is required.
A processing on the original connector and cable would also have to be made.
Printing information:
PLA 1.75mm
0.1mm layer height
0.6 mm - 0.8 mm wall thickness
100% filling
Generate support structure
What is needed for the assembly:
2x adapter
2x M8 hex screw with through hole
2x LED indicators
Power cable (yellow and black) about 2m
1x soldering iron
3x male and female 2Pin SM2.54
Shrink tubing
Tool
I also created a disc for the LED indicators.
It is forbidden to distribute the product for commercial purposes, except as agreed with me.
I also reserve the right to report changes made or similar products without consulting me and to initiate appropriate legal action.