Thingiverse
Dual Print Christmas Ornament by EvilTeach
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a dual print of a jpg, printed as a Christmas ornament.
It takes about an hour to print. It costs about 3.7 meters of filament.
While the scad file was used to help generate it, the gcode file is a manually merged file. It will print the base, then heat the other hot end and finish the print.
The image was printed on a FFC Dual, using blue and glow in the dark filament.
It takes about an hour to print. It costs about 3.7 meters of filament.
While the scad file was used to help generate it, the gcode file is a manually merged file. It will print the base, then heat the other hot end and finish the print.
The image was printed on a FFC Dual, using blue and glow in the dark filament.