Thingiverse
Dual 2" gauge for Flight Simulator by alvaroalea
by Thingiverse
Last crawled date: 4 years, 3 months ago
Generic Dual Gauge for use in panel of GA Flight Simulators.
It's need 2 servos of 9gr. like SG90, or HK15168, and will be conected to the PC with the flight simulator via OpenCockpits Servo Board, a Arduino + FS2Link or similar system.
Designed to be installed in front or from behind a panel, using M3 screws.
Need a 2mm axis, like comet rod or similar and 2 small screws (recycled from toys or similar).
Some parts need to be glued.
I use 3M repositionable glue in spray to glue papel printed parts to a transparent plastic sheet in order to imitate glass of gauge, check the photos.
It's need 2 servos of 9gr. like SG90, or HK15168, and will be conected to the PC with the flight simulator via OpenCockpits Servo Board, a Arduino + FS2Link or similar system.
Designed to be installed in front or from behind a panel, using M3 screws.
Need a 2mm axis, like comet rod or similar and 2 small screws (recycled from toys or similar).
Some parts need to be glued.
I use 3M repositionable glue in spray to glue papel printed parts to a transparent plastic sheet in order to imitate glass of gauge, check the photos.