Thingiverse
Drunk Domo Beer Bottle Opener - Multi Color by lukki15
by Thingiverse
Last crawled date: 4 years, 5 months ago
Redesigned the very good looking bottle opener in OpenSCAD and made split it up so it is possible to print it in multi-color with only one nozzle
And made it compatible with a 2 euro cent coin.
For the best strength print with 100% infill
and in the multi-color case with a layer height of 0.2mm
If you have a Marlin like me, you can use the M600 command to change the filament mid printing.
Active the feature in the firmware and add M600 before and after the teeth and before the saliva. If you want to print it in three different colors.
And made it compatible with a 2 euro cent coin.
For the best strength print with 100% infill
and in the multi-color case with a layer height of 0.2mm
If you have a Marlin like me, you can use the M600 command to change the filament mid printing.
Active the feature in the firmware and add M600 before and after the teeth and before the saliva. If you want to print it in three different colors.