Thingiverse
dremel led iluminator by ormuzsanches
by Thingiverse
Last crawled date: 4 years, 5 months ago
Hello
this thing used to illuminate the work area with a dremel.
needs improvement.
the holes are for 5mm LEDs.
LEDs must be connected in series and connected to an external source.
I used a 5mm drill bit to clean the holes of the LEDs.
The smaller holes are screw terminals of the LEDs in series but can be welded
this thing used to illuminate the work area with a dremel.
needs improvement.
the holes are for 5mm LEDs.
LEDs must be connected in series and connected to an external source.
I used a 5mm drill bit to clean the holes of the LEDs.
The smaller holes are screw terminals of the LEDs in series but can be welded