Thingiverse
Drawstring Slide Lock Clasp by ColdExtruder
by Thingiverse
Last crawled date: 4 years, 2 months ago
Use this for waist bands or back packs or bags or whatevs. My Ruck sack in the army had a really nifty cord catch that was very convenient so I designed this part to reclaim that functionality.
PRINT SPECS
I used 0.1mm layer height with a 0.4mm nozzle and printed about 60mm/s and the quality was functional and acceptable.
Also, I tried scaling it up by 30% for a pair of boots and it worked great!
***This is my first ever design submission so please let me know if I am terrible at this and I will try very hard to fix. THANKS SO MUCH!!!
UPDATES
v3: reworked entirely - better design IMO
v2: units changed to mm for weirdo people less than a km tall
v1: units were in meters (sketchup doesn't like small things) [removed]
PRINT SPECS
I used 0.1mm layer height with a 0.4mm nozzle and printed about 60mm/s and the quality was functional and acceptable.
Also, I tried scaling it up by 30% for a pair of boots and it worked great!
***This is my first ever design submission so please let me know if I am terrible at this and I will try very hard to fix. THANKS SO MUCH!!!
UPDATES
v3: reworked entirely - better design IMO
v2: units changed to mm for weirdo people less than a km tall
v1: units were in meters (sketchup doesn't like small things) [removed]