Thingiverse
Drag Knife For LR2 CNC - MPTH by cows2computers
by Thingiverse
Last crawled date: 4 years, 11 months ago
Drag knife for the Lowrider2 and the LR2 CNC - MPTH (https://www.thingiverse.com/thing:3833666)
You will need:
2x 608Z bearings
2x M3 scews for the blade holder
4x M4 screws and nuts for the 2 part of the body
The round shaft should fit the inside of the bearings tight. You need to sand the shaft until you are able to insert the shaft in the bearings. You will need to apply a force to insert the shaft in the bearings, do not sand the shaft too much, otherwise, the part that holds the blade will fall out from the bearings.
The M3 screws do not need nuts, they will fit the hole in the rotor part.
Also remixed from: https://www.thingiverse.com/thing:1933416
You will need:
2x 608Z bearings
2x M3 scews for the blade holder
4x M4 screws and nuts for the 2 part of the body
The round shaft should fit the inside of the bearings tight. You need to sand the shaft until you are able to insert the shaft in the bearings. You will need to apply a force to insert the shaft in the bearings, do not sand the shaft too much, otherwise, the part that holds the blade will fall out from the bearings.
The M3 screws do not need nuts, they will fit the hole in the rotor part.
Also remixed from: https://www.thingiverse.com/thing:1933416