DPH5005 Case by Neodyme

...stepdown case xt60 by jmdesigns thingiverse stepdown case xt60

...xt60 male connector by eddis thingiverse xt60 male connector case with pressed in contacts.

...for yourself. please let me know it you have any ideas for improvement. and definetly push like if it is worth it! cheers, andrey

...ject some hot glue into the two small holes for the xt60 cover, get it from this one - https://www.thingiverse.com/thing:4793612.

...xt 60 to usb charger case by sammythekat thingiverse this is a case for the xt60 to usb charger more info to come maybe

...and negative leads, the xt60 connector sits in the lid. epoxy the xt60 in place, and then epoxy the lid onto the case, and voila!

...ct for the power supply - nice snap fit. i just modified it to use xt60 input as well as output as that's largely what i use.

...aps. in the middle is a 16,5mm hole for a magnet. i use it inside my steal akku case to collect the caps and change red to green.

...with simplify3d so used the idea and created one in tinkercad. used a 5v 3amp usb port and a xt60 female plug to design the case.

...r box for the ts100 soldering iron with the xt60 cable. just print the parts and add 2x m3 15-30mm screw for the hinge. have fun!

...pole connection for the output. note: the lcd panel is a little tight. in goes in easy but it is a little tough getting back out.

...for yourself. please let me know it you have any ideas for improvement. and definetly push like if it is worth it! cheers, andrey

...on the dps-800gb-a and is not connected to the dph5005 ...

...but nice sh72 soldering iron. with the dph3205 or dph5005 you can have voltages between 0v-32v or 0-50v. of...

...etism works through the closed wall of the circular holder (it's a neodym, you know). also it has countersunk for the screws.

...neodym sun glasses case by hcumberdale thingiverse 8mm dia neodym, 10mm long. glue in 4.

...98x98mm junction box cap by neodyme thingiverse 98x98mm junction box cap

...ure (8x5mm neodym magnet needed) thingiverse for this project you will need : 4x neodym 8x5mm magnet. 4x m4 screws. 4x m4 bolts.

...magnet caused by the heat, i used 1ct € to solder the wires. the coin should be placed between the red (or blue) and yellow part.

...a8) by neodyme thingiverse this mount is designed to slide on the frame of the anet a8 and centred with the belt of the y axis.

... neodymium magnets can be easily detached. link to step by step guide: https://nerd-corner.com/magnetic-clamp-for-neodym-magnets/

... will make soon more version (different design, magnetic closin system, cooling fan support, ...). update 1 : adding slim version

... think - great explanation-video on how to use it:https://youtu.be/-vakwrc86xe by https://www.thingiverse.com/painless360/designs

...case 3dexport case

...case archibase planet showcase show-case glass case glass-case + cakes - 3d model for interior 3d visualization.

...case archibase planet showcase show-case glass case glass-case for chips - 3d model for interior 3d visualization.

...case archibase planet case shelving drawer case - 3d model for interior 3d visualization.

...case archibase planet case rack locker case - 3d model for interior 3d visualization.

...case archibase planet case drawer kitchen furniture case - 3d model for interior 3d visualization.

...case archibase planet case cupboard shelving glass case - 3d model for interior 3d visualization.

...case archibase planet case handbag suitcase case - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...case archibase planet case suitcase case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

...case archibase planet locker case dresser case - 3d model (*.gsm+*.3ds) for interior 3d visualization.